• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.30-39
• /
• 2014

We report in this paper the analysis of the motion of a needle and a spring in a viscous fluid under the influence of gravitational force. Lateral shift as well as vertical motion of a needle falling in a viscous fluid has been observed from a simple experiment. We also observed the combined rotation and translation of a falling spring. The trajectory and velocity of the falling needle and the spring were obtained by using an image processing technique. We also conducted numerical simulation for both problems. For the falling-needle problem, we employed a theory; but it turns out that significant correction is required for the solutions to match the numerical and experimental data. For the falling spring problem various theoretical formula were tested for their justification, but none of the existing theories can successfully predict the numerical and experimental results.

• 제어로봇시스템학회논문지
• /
• 제12권8호
• /
• pp.810-817
• /
• 2006

This paper presents a rotational motion estimation and correction technique for digital image stabilization. An equivalent rotation model is derived so as to accommodate a combined rotational and the translational motion. Thanks to this simplification, the suggested estimation algorithm can directly find the rotational center using geometric characteristic of local motion vectors instead of using searching method. And we also present recursive version of frame to reference algorithm(FRA) for the real time implementation. The proposed DIS system does not require time consuming parameter searching process, while showing comparatively good performance compared with the previous ones. To show the effectiveness of the DIS scheme, the algorithm has been implemented on the DSP based hardware system and experimental results are also discussed.

• 대한치과교정학회지
• /
• 제19권3호
• /
• pp.147-160
• /
• 1989

Long face patients are characterized by excessive anterior facial height, lip incompetence at rest, anterior open bite, and gummy smile. A major problem is an inferior rotation of the posterior maxilla and upper molars. Long face patients have been the most difficult for orthodontist to treat successfully. In growing patients, the methods for impeding excessive vertical growth have been used high pull head gear, functional appliance, and combined type of two. One significant improvement comes from using a full arch splint to deliver force to the maxilla more vertically. In adult patients, orthodontic camouflage treatment is biomechanically difficult and doesn't work when the problem is primarilly vertical. Surgical maxillary impaction provides a means for successfully treating most of problems. Also, superior reposition of the chin via a mandibular inferior border osteotomy is effective in decrease of lower anterior facial height and correction of the poor chin-lip balance. Post-surgical stability and the physiologic response are good. The coordinated orthodontic and surgical treatment is necessary for solution the difficult skeletal deformity.

• Asia pacific journal of information systems
• /
• 제31권3호
• /
• pp.335-357
• /
• 2021

As reproduction of images can be done with ease, copy detection has increasingly become important. In the duplication process, image modifications are likely to occur and some alterations are deliberate and can be viewed as attacks. A wide range of copy detection techniques has been proposed. In our study, content-based copy detection, which basically applies DCT-based features for images, namely, pixel values, edges, texture information and frequency-domain component distribution, is employed. Experiments are carried out to evaluate robustness and sensitivity of DCT-based features from attacks. As different types of DCT-based features hold different pieces of information, how features and attacks are related can be shown in their robustness and sensitivity. Rather than searching for proper features, use of robustness and sensitivity is proposed here to realize how the attacked features have changed when an image attack occurs. The experiments show that, out of ten attacks, the neural networks are able to detect seven attacks namely, Gaussian noise, S&P noise, Gamma correction (high), blurring, resizing (big), compression and rotation with mostly related to their sensitive features.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.63-64
• /
• 1996

The nature of distant faint blue field galaxies remains a mystery, despite the fact that much attention has been devoted to this subject in the last decade. Galaxy counts, particularly those in the optical and near ultraviolet bandpasses, have been demonstrated to be well in excess of those expected in the 'no-evolution' scenario. This has usually been taken to imply that galaxies were brighter in the past, presumably due to a higher rate of star formation. More recently, redshift surveys of galaxies as faint as B$\~$24 have shown that the mean redshift of faint blue galaxies is lower than that predicted by standard evolutionary models (de-signed to fit the galaxy counts). The galaxy number count data and redshift data suggest that evolutionary effects are most prominent at the faint end of the galaxy luminosity function. While these data constrain the form of evolution of the overall luminosity function, they do not constrain evolution in individual galaxies. We are carrying out a series of observations as part of a long-term program aimed at a better understanding of the nature and amount of luminosity evolution in individual galaxies. Our study uses the luminosity-linewidth relation (Tully-Fisher relation) for disk galaxies as a tool to study luminosity evolution. Several studies of a related nature are being carried out by other groups. A specific experiment to test a 'no-evolution' hypothesis is presented here. We have used the AUTOFIB multifibre spectro-graph on the 4-metre Anglo-Australian Telescope (AAT) and the Rutgers Fabry-Perot imager on the Cerro Tolalo lnteramerican Observatory (CTIO) 4-metre tele-scope to measure the internal kinematics of a representative sample of faint blue field galaxies in the red-shift range z = 0.15-0.4. The emission line profiles of [OII] and [OIII] in a typical sample galaxy are significantly broader than the instrumental resolution (100-120 km $s^{-l}$), and it is possible to make a reliable de-termination of the linewidth. Detailed and realistic simulations based on the properties of nearby, low-luminosity spirals are used to convert the measured linewidth into an estimate of the characteristic rotation speed, making statistical corrections for the effects of inclination, non-uniform distribution of ionized gas, rotation curve shape, finite fibre aperture, etc.. The (corrected) mean characteristic rotation speed for our distant galaxy sample is compared to the mean rotation speed of local galaxies of comparable blue luminosity and colour. The typical galaxy in our distant sample has a B-band luminosity of about 0.25 L$\ast$ and a colour that corresponds to the Sb-Sd/Im range of Hub-ble types. Details of the AUTOFIB fibre spectroscopic study are described by Rix et al. (1996). Follow-up deep near infrared imaging with the 10-metre Keck tele-scope+ NIRC combination and high angular resolution imaging with the Hubble Space Telescope's WFPC2 are being used to determine the structural and orientation parameters of galaxies on an individual basis. This information is being combined with the spatially resolved CTIO Fabry-Perot data to study the internal kinematics of distant galaxies (Ing et al. 1996). The two main questions addressed by these (preliminary studies) are: 1. Do galaxies of a given luminosity and colour have the same characteristic rotation speed in the distant and local Universe? The distant galaxies in our AUTOFIB sample have a mean characteristic rotation speed of $\~$70 km $s^{-l}$ after correction for measurement bias (Fig. 1); this is inconsistent with the characteristic rotation speed of local galaxies of comparable photometric proper-ties (105 km $s^{-l}$) at the > $99\%$ significance level (Fig. 2). A straightforward explanation for this discrepancy is that faint blue galaxies were about 1-1.5 mag brighter (in the B band) at z $\~$ 0.25 than their present-day counterparts. 2. What is the nature of the internal kinematics of faint field galaxies? The linewidths of these faint galaxies appear to be dominated by the global disk rotation. The larger galaxies in our sample are about 2"-.5" in diameter so one can get direct insight into the nature of their internal velocity field from the $\~$ I" seeing CTIO Fabry-Perot data. A montage of Fabry-Perot data is shown in Fig. 3. The linewidths are too large (by. $5\sigma$) to be caused by turbulence in giant HII regions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권5호
• /
• pp.359-367
• /
• 2004

Purpose: After the surgical correction with sagittal split ramus osteotomy, the position of the mandibular condyle in the glenoid fossa and the proximal segment of the mandible change because of bony gap between proximal and distal segment, especially in case of mandibular setback asymmetrically. In this study, positional changes in the condyle and proximal segment after BSSRO were estimated in the mandibular asymmetry patient by analyzing the in submentovertex view and P-A cephalogram for identification of ideal condylar position during surgery. Patients and Methods: The 20 patients were selected randomly who visit Dankook Dental Hospital for mandibular asymmetry. Bilateral sagittal split ramus osteotomy with rigid fixation was performed and P-A cephalogram and submentovertex view was taken at the time of preoperative, immediate postoperative, 3 month postoperative period. Results: Intercondylar length and transverse condylar angle was increased due to inward rotation of proximal segment and anteromedial rotation of lateral pole of condyle head. The condylar position had a tendency to return to the preoperative state and after 3 months return up to about half of the immediate post-operative changes, and all the results showed more changes in asymmetry patient and deviated part of the mandible. Conclusion: Based on all these results above, surgeon should make efforts to have a precise preoperative analysis and to have a ideal condylar position during rigid fixation after BSSRO.

• 대한치과교정학회지
• /
• 제47권2호
• /
• pp.118-129
• /
• 2017

Objective: To evaluate the effects of facemask therapy, which was anchored from the zygomatic buttresses of the maxilla by using two miniplates, in skeletal Class III patients with maxillary deficiency. Methods: Eighteen skeletal Class III patients (10 girls and 8 boys; mean age, $11.4{\pm}1.28$ years) with maxillary deficiency were treated using miniplate-anchored facemasks, and their outcomes were compared with those of a Class III control group (9 girls and 9 boys; mean age, $10.6{\pm}1.12$ years). Two I-shaped miniplates were placed on the right and left zygomatic buttresses of the maxilla, and a facemask was applied with a 400 g force per side. Intragroup comparisons were made using the Wilcoxon test, and intergroup comparisons were made using the Mann-Whitney U-test (p < 0.05). Results: In the treatment group, the maxilla moved 3.3 mm forward, the mandible showed posterior rotation by $1.5^{\circ}$, and the lower incisors were retroclined after treatment. These results were significantly different from those in the control group (p < 0.05). No significant anterior rotation of the palatal plane was observed after treatment. Moreover, changes in the sagittal positions of the maxillary incisors and molars were similar between the treatment and control groups. Conclusions: Skeletally anchored facemask therapy is an effective method for correcting Class III malocclusions, which also minimizes the undesired dental side effects of conventional methods in the maxilla.

• Archives of Plastic Surgery
• /
• 제38권3호
• /
• pp.279-286
• /
• 2011

Purpose: Chin is located in a prominent position, and is important to balance and harmony of the face. Genioplasty is widely performed with patients' high satisfaction, yet being relatively simple procedure. Recently in analysis of dentofacial trait, three rotational variables of yaw, pith, and roll are considered with three translational variables (forward/backward, up/down, right/left). And we could correct chin deformity effectively by applying the three rotational variables with three translational variables in genioplasty. Methods: Twenty-eight patients who have chin deformity underwent osseous genioplasty. Preoperative photography, facial three dimensional computed tomography, and cephalography were taken while chin deformities were accessed. The chin deformity was classified into four categories; macrogenia, microgenia, asymmetric chin deformity, and combined chin deformity groups. According to the nature of chin deformities and the patients' desire, preoperative plans were formulated, in consideration of three rotational variables and translational variables. Through intraoral approach, anterior mandible was exposed in the subperiosteal plane between the mental foramens and beneath the mental foramens. In the anterior mandible, vertical and horizontal grid lines with 5 mm intervals were marked to confirm the spatial location of osteomized bone segment after osteotomy. Chin repositioning was done in consideration of axial rotation and planar translation. Results: Most of the patients had achieved satisfactory results with few complications. By considering the three rotational variables, it was possible to make the chin repositioning effectively. One of the patients complained about insufficient chin correction. In other case, persistent sensory impairment around chin was observed. Conclusion: In conclusion, it is worthwhile to apply preoperative analysis and operative procedures in consideration of a three rotational variables with three translational variables in genioplasty.

• PNF and Movement
• /
• 제14권1호
• /
• pp.1-6
• /
• 2016

Purpose: The purpose of this study was to analyze the effects of proprioceptive neuromuscular facilitation (PNF) patterns on electromyography (EMG) activity in the rectus abdominis, internal abdominal oblique, external abdominal oblique, and erector spinae according to position changes. Methods: Ten healthy adults volunteered to participate in the study. The subjects were required to complete exercises that followed two PNF extremity patterns, namely, an upper extremity extension-adduction-internal rotation pattern and a lower extremity flexion-adduction-external rotation pattern. The exercises were applied in the supine, side-lying, and sitting positions. Repeated measure one-way ANOVA and post-hoc Bonferroni correction were used to determine the influence of the patterns on muscle activity for each muscle, and descriptive statistics were then used to determine the local/global muscle ratios. Results: The upper extremity pattern had a significant effect on the rectus abdominis and erector spinae in the supine position, and on the internal oblique and external oblique in the sitting position (p<0.05). The median value for the internal oblique/rectus abdominis showed a high ratio of 2.05, and a high ratio of 1.01 was shown for the internal oblique/external oblique in the sitting position. The lower extremity pattern had a significant effect on the rectus abdominis in the side-lying position and on the internal oblique, external oblique, and erector spinae in the sitting position (p<0.05). The median value for the internal oblique/rectus abdominis showed a high ratio of 2.83 in the sitting position and a high ratio of 1.30 for the internal oblique/external oblique in the side-lying position. Conclusion: The PNF pattern increases local muscle activation in an unstable position. Therefore, when the pattern is used for intervention purposes, trunk stability and varied position changes should be taken into account.

• 융합정보논문지
• /
• 제7권2호
• /
• pp.59-65
• /
• 2017

창의적 모듈형 완구의 동작 구현을 위하여 동작을 기록하고 또한 읽어서 반복 동작하는 방식의 움직임이 요구된다. 이 때 완구 동작용 모터 출력축에는 전위차계를 사용하여 절대 회전각을 읽어서 제어를 수행하게 된다. 하지만 전위차계의 감지 영역의 불안정한 부분이 일정 영역에 존재하게 되는데 이로 인한 모터 제어의 불안정을 가져올 수 있다. 본 논문에서는 2개의 전위차계를 한 축에 장착시켜 안정된 영역을 각각 읽어서 1회전 절대각을 찾는 알고리즘을 제안한다. 그리고 다중 회전을 수행 시 필요로 하는 보정 알고리즘에 대해서도 기술하였다. 제안된 방식은 실제 토포보 모듈라 완구에 적용하여 동작을 기록하고 반복 동작을 수행하여 효과적으로 동작됨을 보였다. 아울러 다 회전 동작을 기록하고 동작 시켜 제안된 방식의 유용성을 제시하였다. 향 후 다양한 동작을 통하여 기록과 재생의 기능을 확대해 나갈 것이다.