• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.271-277
• /
• 2003

최근 환경 소음이 사회적인 문제로 대두되고 있는 가운데, 생활수준의 향상으로 저소음화에 대한 요구가 증가되고 있는 실정이다. 이와 같이 소음에 관한 일반인들의 관심이 높아지면서 생환주변에서 주요 소음원으로 지적되고 있는 회전기계, 특히 가전제품을 비롯한 유동관련 기계류의 소음을 낮추기 위한 노력이 절실히 요구되고 있다. 본 소평팬에 대한 연구에서는 음압 및 음향인텐시티를 이용하여 소음원을 해석하였다. 이때, 광센서를 이용한 축류형 팬의 동기화가 수행되어졌고, 팬 형상에서 정확한 소음원의 위치를 규명하기 위한 기록시간의 결정이 제안되어졌다. 소음 발생하는 위치를 규명하였고, 지향성 연구를 통하여 축류형 팬의 방사형태를 결정하였으며, 음의 흐름도를 가시화 하였다.

• 항공우주기술
• /
• 제3권2호
• /
• pp.217-228
• /
• 2004

본 논문은 복합재 패들형 블레이드를 장착한 축소 힌지없는 로터 시스템의 정지 및 전진 비행조건에 대한 회전시험 기술과 결과에 대한 것이다. 축소 로터 시스템은 실물크기 로터 시스템의 구조 자료를 이용하여 프루드 축소화하였고, 허브 flexure는 동일한 로터의 동력학적 특성을 기준으로 금속재와 복합재 2가지를 제작하였다. 2종류의 힌지없는 허브시스템을 KARI의 GSRTS에 장착후 회전 시험을 실시하여 로터 시스템의 리드래그 감쇠비와 공력 하중을 측정하였다. 리드래그 모드의 감쇠비를 산출하기 위해 MBA(Moving Block Analysis)기법을 사용하였고, 허브와 주축 사이에 6분력 발란스를 장착하고, 블레이드에 스트레인게이지를 부착하여 공력하중을 측정하였다. 시험은 제자리 및 전진비행 조건에 따라 지상 및 풍동에서 각각 수행하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.185-192
• /
• 2004

The aeroacoustic characteristics of a centrifugal fan for a vacuum cleaner and its noise reduction method are studied in this paper. The major noise source of a vacuum cleaner is the centrifugal fan. The impeller of the fan rotates at over 30000 rpm, and generates very high-level noise. It was revealed that the dominant noise source is the aerodynamic interaction between the rotating impeller and stationary diffuser. The directivity of acoustic pressure showed that most of the noise propagates backward direction of the fan-motor assembly. In order to reduce the high tonal sound generated from the aerodynamic interaction, unevenly pitched impeller and diffuser, and tapered impeller designs were proposed and experiments were performed. Uneven pitch design of the impeller changes the sound quality while the overall sound power level (SPL) and the performance remains similar. The effect of the tapered design of impeller was evaluated. The trailing edge of the tapered fan is inclined. This reduces the flow interaction between the rotating impeller and the stationary diffuser because of some phase shifts. The static efficiency of the new impeller design is slightly lower than the previous design. However, the overall SPL is reduced by about 4 dB(A). The SPL of the fundamental blade passing frequency (BPF) is reduced by about 6 dB (A) and the 2$\^$nd/ BPF is reduced about 20 dB (A). The vacuum cleaner with the tapered impeller design produces lower noise level than the previous one, and the strong tonal sound was dramatically reduced.

• 한국항공우주학회지
• /
• 제44권5호
• /
• pp.439-446
• /
• 2016

이 논문에서는 무베어링 로터의 동특성을 비회전 강성 및 진동수 측정 시험과 회전 훨타워 시험을 통해 살펴보았다. 무베어링 로터의 주요 구성품인 블레이드, 유연보, 토크튜브에 대해 강성 및 고유진동수를 측정하여 해석을 위한 물성치를 확보하였고, 훨타워 시험 전에 댐퍼와 스너버를 장착한 무베어링 로터를 조립하여 지상에서 하중이 부가되는 조건하에 기능시험을 수행하여 로터 구성품간의 간섭 여부, 기구학적 거동 등을 확인하였다. 4개의 블레이드를 가지고 회전반경이 5.82m인 무베어링 로터의 회전 동특성시험을 회전면 높이가 9.65m인 훨타워에서 수행하였다. 정지비행성능을 확인하기 위해 추력과 사용동력을 측정하였으며, 회전시 블레이드의 고유진동수 및 감쇠를 측정하기 위해 유압 가진기를 통하여 사이클릭 가진을 하였다.

• 한국음향학회지
• /
• 제28권3호
• /
• pp.198-207
• /
• 2009

캐비테이션 기포 (cavitation bubble)가 존재하는 유체 내에서 다중 주파수 (multi-frequency)를 송수신할 때 음파의 감쇠(attenuation)와 음속 (sound speed) 변화가 발생되었고, 이 특징을 이용하여 기포의 크기와 분포량을 추정하였다. 음향실험은 $20{\sim}300\;kHz$ 대역의 다중 주파수를 이용하여 실시하였고, 기포가 존재하는 경우와 존재하지 않는 경우의 주파수별 음속 비와 음파의 감쇠 값을 측정하였다. 캐비테이션 기포는 모터 끝에 장착된 둥근 막대형 블레이드 (blade)를 물 속에서 고속회전시켜 발생되었다. 캐비테이션 기포의 크기 및 분포량은 모터의 회전 속도, 블레이드 끝단 (tip)의 겉넓이를 변화시키며 관측하였고, 기포 생성 후 시간별 기포량 감소율을 측정하였다. 실험 결과 발생된 기포의 크기는 반경 $10{\sim}60{\mu}m$였고, $10{\sim}20{\mu}m$와 $20{\sim}30{\mu}m$ 반경의 기포가 전체의 약 45%와 25%를 차지하였다. 세부실험 결과로 모터의 회전 속도가 증가할수록 더 많은 양의 기포가 발생되지만 블레이드 끝단 면적의 증가와 기포 발생량의 변화는 상관성이 없음을 확인하였다. 또한 기포량의 감소율은 지속시간별로 일정하였고, 2분 이내에 전체량의 80%가 소멸됨을 관측하였다. 음향실험의 결과를 검증하기 위해 동일한 조건에서 광학카메라로 촬영한 기포 분포량과 비교하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.178.2-178.2
• /
• 2010

The wind turbine gearbox is important rotating part to transmit torque from turbine blade to generator. Generally, gear shaft which rotates causes vibration by influence of stiffness and mass with gear shaft. Root cause of this vibration source is well known to gear transmission error that is decided from gear tooth property. Transmission error excites a gear, and makes excitation force that is vibrated shaft. This vibration of shaft is transmitted to gearbox housing through gearbox bearing. If the resonance about which the natural frequency of the gearbox accords with shaft exciting frequency occurs, a wind turbine can lead to failure. The gearbox for wind turbine should be considered influence of vibration as well as the fatigue life and its performance by such reason. The cause to vibration should be closely examined to reduce influence of such vibration. In this paper, the cause of the vibration which occurs by a gearbox is closely examined and the method which can reduce the vibration which occurred is shown. It is compared with vibration test outcome of a 3MW gearbox for verification of the method shown by this paper.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.87-94
• /
• 2001

Filament winding process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. And now it is well established as a versatile method for storage tanks and pipe for the chemical and other industries. In this study, tensile strength of a filament wound ring specimens were evaluated by split disk test fixture and dress disk test fixture. The results obtained from experiments were compared with the theoretical values obtained by the rule of mixture. And the purpose of this paper is to suggest an appropriate test method for the evaluation of tensile properties of filament wound structures. The tensile strength of a ring specimens tested by the dress disk test showed better agreement with the theoretical values than of a ring specimen tested by the split disk test because the stress concentration in edges of s split disk test fixture is more severe than the that of dress disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• 한국소음진동공학회논문집
• /
• 제13권4호
• /
• pp.258-265
• /
• 2003

This paper suggests the noise reduction method of the engine cooling fan. The fan noise contribution to the OASPL of engine room was estimated and the noise source was identified for the rotating fan by sound intensity method. And the program for Predicting the noise spectrum of axial flow fan was also developed. The radiated acoustic pressure is expressed in terms of discrete frequency noise Peaks at BPF and its harmonics and the line spectrum at the broad band by the proposed noise generation mechanisms. In this Paper, it Is shown that the comparison of the measured and calculated noise spectra of fan validates the noise predicting program. And this paper presents the characteristics of the fan noise in order to modify the design parameters. Accordingly, the design parameters were determined for the noise reduction of the fan.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.158-163
• /
• 2005

In this paper the aeroacoustic characteristics of a tilt-rotor system is measured by using a sealed model tilt-rotor. With a microphone array system and the do-dopplerization algorithm, the location and the characteristics of rotor noise are successfully measured. The most of high frequency noise (4kHz) is found to be located at rotor blade tips, but the low frequency tonal noise is dominant on the middle of the rotor blades. The measured tonal noise characteristics are compared to the results of theoretical calculation. At 0.5m distance from the rotor plane, measured and calculated data are relatively well matched regardless of rotating speed and collective pitch angie for the azimuthal angles between $0^{\circ}\;and\;60^{\circ}$. However, the data on the azimuthal angles between $70^{\circ}\;and\;90^{\circ}$ are not quite comparable. In addition, the compared data for far-field case (1.5m) are quite different. This is probably due to the unsteady effect which if not included in the theoretical calculation.

• 한국유체기계학회 논문집
• /
• 제7권3호
• /
• pp.7-13
• /
• 2004

In this paper, we identify the noise source and the path of a chiller. This chiller is newly developed for R-l34a refrigerant and 250 RT cooling capacity. The measured overall SPL of the developed turbo-chiller is about 100 dBA. Due to the high rotating speed of the centrifugal impeller, the nun noise source of the chiller is the blade passing frequency and its higher harmonics of the centrifugal impeller. This generated soundpropagates through the duct, and then transmits and radiates to the outer field. From the experiment, it is found that the high frequency noise is mostlytransmitted and radiated through the elbow duct, but the low frequency noise is transmitted and vadiated through the condenser wall. Therefore applying the absorbing material is an effective way of reducing the high and low frequency noise simultaneously. Measurement results show that the application of the sound absorbing material to the elbow duct reduced the overall sound pressure level by 4 dB compared to the 9 dBA reduction for the case of full enclosure. In order to control the generated noise, a dissipativetype silencer is also designed and tested. The silencer reduced the radiated noise about 7.5 dBA.