• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.6-11
• /
• 2007

The rheological properties of slag cement pastes by effect of particle size distribution of binder were investigated using a Rheostress 1 rheometer (Haake) with a cylindrical spindle and the relationship between fluidity particle size distribution using the Rosin-Rammler equation. Samples are combined the two types of slag powder and OPC, fine slag particles sized Elaine specific surface area $8,000cm^2/g$, coarse slag particles sized Elaine specific surface area $2,000cm^2/g$, intermediate OPC particles $3,450cm^2/g$, used to search for the combination that would yield the best quality product. The all flow curves which were measured by rheometer showed hysterisis and could be classified into 4 types. When the combination was based on a ratio of 15-20 vol% fine particles, 40-50 vol% intermediate particles, 30-40 vol% coarse particles of the total volume, a high fluidity and low yield-strength was achieved. The Rosin-Rammler function can explain aboved correlation flow curve types. On type 1, the n-value had a correlation with plastic viscosity however the blend of type 2 and 3 showed consistent n-value regardless of plastic viscosity. In addition, the blend in type 4 tended to a rise in fluidity according to the increase of the n-value.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.721-724
• /
• 2006

In this study, particle size distribution of cement powder system were adjusted using the blast furnace slag powder, Blaine $2250cm^2/g\;and\;8300cm^2/g$, which easy to adjust particle size distribution to examine how particle size distribution of the binder has an effect on rheological properties of the cement paste. In addition, the relationship between n-value of Rosin-Rammler function and plastic viscosity were discussed. All measured flow curves represented thixotropy behavior and the hysteresis area was smaller for the more added coarse particle. When the combination was based on a ratio of $20{\sim}25vol%$ fine particles, $30{\sim}40vol%$ OPC and $40{\sim}45vol%$ coarse particles of the total volume, a high fluidity and low yield strength was achieved.

• Korea-Australia Rheology Journal
• /
• 제15권1호
• /
• pp.35-41
• /
• 2003

It is expected that particle size distribution of any portion obtained through screening, is of more uniform than that of the original mixture, typically following such as log-normal, Rosin-Rammler distributions and so on. In this study, therefore, a new relation between parameters of the uniform distribution and flow characteristics of the coarse particle suspensions is derived based on the continuous polydisperse model (Ookawara and Ogawa, 2002b), which is derived from the discrete polydisperse model (Ookawara and Ogawa,2002a). The derived model equation predicts a linear increase of viscosity with shear rate, viz., dilutant flow characteristics. Further, the increase of viscosity is expected to be proportional to the square of volume fraction of particles, and to show the linear dependency on density and average diameter of particles. It is also shown that the uniform distribution model includes additional term that expresses the effect of distribution width. For verification of the model, the experimental results of Clarke (1967) are cited as well as in our previous work for the monodisperse model (Ookawara and Ogawa,2000) since most parameters were varied independently in his work. It is suggested that the newly introduced term expands the applicable range compared with the monodisperse model.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.45-59
• /
• 2011

According as gradually increasing the demand for Eco-friendly products it has been progressed fairly development at a field of printing and printing inks. The Inks are used by soy oil beginning of ink industry for preventing environment. Now it is possible to make Eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents for preventing environment. But There is some problems if using vegetable ester to inks. Vegetable ester has high solubility, it causes misting and low viscosity of the Inks. So resin is required high performance. Thus, in this paper, I studied about the properties variation of the Varnish and inks According to using the phenolic modified rosin ester and Soy oil Methyl esters. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.16-21
• /
• 2017

The sprinkler system is a basic fire extinguishing system that uses water as an extinguishing agent. In order to evaluate the fire extinguishing performance of the sprinkler system, information such as the discharge angle, discharge speed, discharge pressure, flow rate, and water droplet size of the installed head are required. However, there is a lack of research on droplets size compared to other requirements. In this study, to evaluate the extinguishing characteristics of sprinkler system, the droplet size distribution was measured for various types of sprinkler heads actually used. The size of the droplet was measured using laser diffraction method. The 50% cumulative volume distribution ($D_{v50}$) according to discharge coefficient(K factor) was $540{\mu}m{\sim}695{\mu}m$ for K50, $542{\mu}m{\sim}1,192{\mu}m$ for K80, $980{\mu}m{\sim}1,223{\mu}m$ for K115 and $1,188{\mu}m{\sim}1,234{\mu}m$ for K202. Based on the measured results, the vaeiance of the droplet particle distribution and the distribution ($D_{v50}$) according to discharge coefficient(K factor) was $540{\mu}m{\sim}695{\mu}m$ for K50, $542{\mu}m{\sim}1,192{\mu}m$ for K80, $980{\mu}m{\sim}1,223{\mu}m$ for K115 and $1,188{\mu}m{\sim}1,234{\mu}m$ for K202. Based on the measured results, the vaeiance of the droplet particle distribution and the Rosin-Rammler index value are presented. As a result of the fire simulation with FDS, it was confirmed that the performance difference occurs according to the water droplet size distribution even when the same amount of water is used. Therefore, the extinguishing performance of the sprinkler system should be evaluated considering the droplet size distribution according to the sprinkler head type.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.427-436
• /
• 2010

Much oyster shell is breeding by character and conduct of oyster-industry for a long time among them. An experimental study was carried out to investigate the recycling possibility of waste oyster shells, which induce environmental pollutions by piling up out at the open or the temporary reclamation. The purpose of this study is to develope eco-friendly binder using waste oyster shells, and to reinforce soils fur soft soil improvement. In this paper, a series of laboratory tests including compressive pot tests were performed to evaluate characteristics of soils treated by developed waste oyster shells with different water content of soils. Based on test results, eco-friendly Supporter manufactured from waste oyster shells were estimated as good resource materials for soft soil improvements. We got the conclusion by a series of experiment, It is verified that change of pH of soil is improved by mixing with oyster shells. The homogenization method for deducing apparent of oyster shells, which can consider micro-structure of mixed soil, is introduced. The improvement treatment leaded to enlarge fluctuation of soil moisture content. The effect of calcium concentration was good though improvement treatment of physical property. In addition, the crop yield in amelioration plots increased. It means that the increase of crop yield was caused by improvement of soil physical properties rather than improvement of calcium concentration.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.51-69
• /
• 2024

Currently, composite lining mountain tunnels in China are generally classified based on the [BQ] method for the surrounding rock grade. Increasingly, tunnel field construction is replicated indoors for scale down model tests. However, the development of analogous materials for model tests of composite lining tunnels with different surrounding rock grades is still unclear. In this study, typical Class III and V surrounding rock analogous materials and corresponding composite lining support materials were developed. The whole processes of excavation-support dynamics of the mountain tunnels were simulated. Data on the variation of deformations, contact pressures and strains on the surrounding rock were obtained. Finally, a comparative analysis between model tests and numerical simulations was performed to verify the rationality of analogous material development. The following useful conclusions were obtained by analyzing the data from the tests. The main analogous materials of Class III surrounding rock are barite powder, high-strength gypsum and quartz sand with fly ash, quartz sand, anhydrous ethanol and rosin for Class V surrounding rock. Analogous materials for rockbolts, steel arches are replaced by aluminum bar and iron bar respectively with both shotcrete and secondary lining corresponding to gypsum and water. In addition, load release rate of Class V surrounding rock should be less than Class III surrounding rock. The fenestration level had large influence on the load sharing ratio of the secondary lining, with a difference of more than 30%, while the influence of the support time was smaller. The Sharing ratios of secondary lining in Class III surrounding rock do not exceed 12%, while those of Class V surrounding rock exceed 40%. The overall difference between the results of model tests and numerical simulations is small, which verifies the feasibility of similar material development in this study.

• 보존과학회지
• /
• 제35권5호
• /
• pp.453-469
• /
• 2019

청자 '순화4년'명 항아리는 굽바닥에 명문이 새겨져 용도와 사용처, 제작자를 알 수 있는 등 초기 청자의 제작 정황을 보여주는 중요한 편년자료이다. 청자 항아리는 과거에 여러 번 수리복원 되었으나 시간이 지나면서 다양한 환경변화로 인해 처리 재료가 노화되어 균열부의 이격 및 단차가 발생하는 등 구조적 안정성이 우려되었다. 보존상태를 정밀 진단한 결과, 청자 항아리는 정면의 '입(入)'자형 균열, 좌면의 'V'자형 결실부를 포함한 균열, 후면의 'J'자형 균열이 주요 손상부위로 확인되었다. 균열부는 장뇌, 건성유, 송진 등이 포함된 정제 옻을 접착제로 토분을 첨가하여 접합하고 접합선은 다시 정제 옻을 칠한 후 금분으로 표면 처리한 것을 알 수 있었다. 결실부는 석고로 복원 후 아크릴 물감으로 색맞춤하였다. 이후 수리복원 재료가 노화되어 1981년에 국립중앙박물관에서 응급처리를 실시하였는데, 균열부 보강을 위해 Cemedine C를 쓰거나 Cemedine C에 Microballoon을 첨가하여 사용하였다. 보존처리는 유물의 보존상태 진단 결과를 근거로, 과거 수리복원 재료를 제거하고 물리적으로 취약한 부분을 다시 접합복원을 통해 보강하는데 중점을 두었다. 또한 추후 전시하는데 활용될 수 있도록 복원부를 중심으로 색맞춤을 실시하였다.

• 분석과학
• /
• 제6권5호
• /
• pp.521-530
• /
• 1993

몬트리올의정서에 의하여 오존층 파괴물질로 규정된 전자산업의 필수불가결한 세정제인 CFC 113(1,1,2-trichloro 1,2,2,-trifluoroethane)의 사용이 앞으로 규제가 됨에 따라서 대체세정제의 개발이 활발히 진행되고 있다. 따라서 현재 시판중인 세정제의 종류는 상당히 많다. 이 중에서 Axarel 32(DuPont), Cleanthru 750H(KAO Chemical), EC-Ultra(Petroferm)를 선정하여 CFC 113과 세정성능을 비교하였다. CFC 113과 대체세정제의 세정성능 검사방법은 기본적은 물성측정, 재질호환성에 대한 실험, 증발속도의 측정, 오염물질의 제거효율에 관한 실험으로 구성되어 있다. CFC 113과 대체세정제들의 기본적인 물성들은 서로 상이하였다. 대체세정제는 비점이 높고 표면장력과 점도가 CFC 113보다 큰 값을 가지고 있다. 전자산업에서의 로진계 flux를 오염물질로 하고 각기의 세정제와의 용해도를 비교한 결과 비극성 유기물질은 abietic acid에 대한 용해도는 서로 유사하였으나 대체세정제의 경우 극성 유기물질에 대한 용해도는 CFC 113에 비해서 월등히 좋았다. 또한 비점이 낮은 CFC 113의 건조성은 대체세정제와는 비교할 수 없을 정도로 우수하였고 특히 대체세정제 중에서 EC-Ultra는 건조성이 매우 낮았다. CFC 113과 대체세정제에서의 PCB의 구성 재질인 FR4와 Cu-coated FR4에 대한 재질호환성은 거의 비슷하였다. Abietic acid의 제거효율에 관한 실험에서는 초음파 세정에 의해서 우수한 세정효과를 보여 주었으며 침적에 의해 세정에서는 건조성이 좋은 세정제가 유리하지만 초음파 세정에 의해서 대체세정제간의 제거효율의 차이는 거의 없었다. CFC 113의 대체세정제로서 로진계 flux를 제거하는 대체세정제간의 세정성능은 큰 차이는 없으나 최종 세정제로 선정하기 위해서는 세정장치의 적용, 환경문제 및 경제성의 고려가 병행되어야 한다.