• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.72-75
• /
• 2008

Quality properties of red ginseng prepared with different cultivation years of fresh ginseng produced in Punggi region were investigated. Fresh ginseng cultivated for 4, 5, or 6 years was steamed for 3.5 hr and dried for 24 hr at $60{\sim}65^{\circ}C$ and subsequently for $3{\sim}4$ days at $40^{\circ}C$ under commercial conditions. Compared to 6 years-old roots, the five years-old roots showed similar or some lower quality properties in terms of color, appearance, diameter, and inside quality, but higher ones in length and yield of prepared red ginseng. In particular, the levels of ginsenoside $Rg_3$ and $Rh_2$, which are known as specific components in red ginseng, were the highest in 5 years-old roots. The result shows that fresh ginseng of 5 years-old roots produced in Punggi region can be utilized as a raw material for the manufacture of high-quality red ginseng.

• Journal of Ginseng Research
• /
• v.35 no.1
• /
• pp.31-38
• /
• 2011

In order to distinguish the cultivation area of Panax ginseng, principal component analysis (PCA) using quantitative and qualitative data acquired from HPLC was carried out. A new HPLC method coupled with evaporative light scattering detection (HPLC-ELSD) was developed for the simultaneous quantification of ten major ginsenosides, namely $Rh_1$, $Rg_2$, $Rg_3$, $Rg_1$, Rf, Re, Rd, $Rb_2$, Rc, and $Rb_1$ in the root of P. ginseng C. A. Meyer. Simultaneous separations of these ten ginsenosides were achieved on a carbohydrate analytical column. The mobile phase consisted of acetonitrile-water-isopropanol, and acetonitrile-water-isopropanol using a gradient elution. Distinct differences in qualitative and quantitative characteristics for ginsenosides were found between the ginseng roots produced in two different Korean cultivation areas, Ganghwa and Punggi. The ginsenoside profiles obtained via HPLC analysis were subjected to PCA. PCA score plots using two principal components (PCs) showed good separation for the ginseng roots cultivated in Ganghwa and Punggi. PC1 influenced the separation, capturing 43.6% of the variance, while PC2 affected differentiation, explaining 18.0% of the variance. The highest contribution components were ginsenoside $Rg_3$ for PC1 and ginsenoside Rf for PC2. Particularly, the PCA score plot for the small ginseng roots of six-year old, each of which was light than 147 g fresh weight, showed more distinct discrimination. PC1 influenced the separation between different sample sets, capturing 51.8% of the variance, while PC2 affected differentiation, also explaining 28.0% of the variance. The highest contribution component was ginsenoside Rf for PC1 and ginsenoside $Rg_2$ for PC2. In conclusion, the HPLC-ELSD method using a carbohydrate column allowed for the simultaneous quantification of ten major ginsenosides, and PCA analysis of the ginsenoside peaks shown on the HPLC chromatogram would be a very acceptable strategy for discrimination of the cultivation area of ginseng roots.

• Journal of Ginseng Research
• /
• v.26 no.3
• /
• pp.159-164
• /
• 2002

Experiments were carried out to select the rusty tolerance lines in 39 inbred lines of ginseng cultivated in field, among them, 7 lines showed low degree of rusty root while 7 lines showed high degree of rusty root. In order to select marker elements among mineral nutrients for rusty ginseng root, we combined 5 groups as follows : Ⅰ (healthy-root of low rusty degree lines vs. rusty-root of high rusty degree lines), II (healthy-root vs. rusty-root in low rusty degree lines), Ⅲ (healthy-root vs. rusty-root in high rusty degree lines), Ⅳ (low rusty degree lines vs. high rusty degree lines in rusty-root), Ⅴ (low rusty degree lines vs. high rusty degree lines in healthy-root), and analyzed mineral nutrition at different root parts. The contents of mineral nutritions in stele and cortex were not different between healthy lines and rusty lines, and between healthy roots and rusty roots, but that in branch and fine roots were not a tendency. The contents of Fe, Na and Al in epidermis were higher in rusty-root than healthy-root. Also, the contents of Fe and Al in epidermis of high rusty degree lines (HRL) were higher than those of low rusty degree lines (LRL) in healthy-roots and rusty-roots, and so we suggest Fe and Al as markers to select low rusty degree ginseng lines.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.32.1-32.4
• /
• 2020

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions: This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.2
• /
• pp.123-132
• /
• 1994

Tow-year-old Taxus cuspidata shoot cuttings were treated with various electrical impacts of cathode on their base and anode on their apex by normal and reverse source. The cuttings were previously treated with 200ppm IBA for 12 hours and the rooting percentage, the length, and the weight of roots were checked. The auxin contents of cuttings were also examined by high-performance liquid chromatography. The results obtained on this study are as follows; 1. Normal treatment, cathode into the base and anode into apex, seemed to accelerate rooting while reverse treatment showed less effective than normal treatment on rooting, but both treatments were more effective than control. 2. The impact of electrical treatment at 30mV for 30min has a remarkable effect on the percentage rooting, the length, and the weight of roots. 3. Root primordia were formed at the basipetal end of cuttings where the end of primary pith ray meets the cambium in control treatment and formed at the basal part of cuttings irregularly in electrical treatment. 4. High-performance liquid chromatography showed electrical treatment was more effective on auxin accumulation than control, and 30mV-30min was the most effective on auxin accumulation.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.6
• /
• pp.523-527
• /
• 2011

A 67-year-old woman presented for evaluation of severe coccygeal pain. The computed tomography scans and magnetic resonance imaging showed an asymmetric midline sacral tumor invading the right lower portion of S2. To preserve both S2 nerve roots and to obtain negative surgical margins, a modified mid-sacrectomy with an aid of a computed navigation system was performed. The sacral tumor was excised en bloc with negative tumor margins. Both S2 nerve roots were preserved and additional reconstruction was not necessary because of minimal resection of the sacroiliac joint. We report a case of a sacral chordoma which was excised en bloc with adequate surgical margins by a computer-assisted modified mid-sacrectomy. The computed navigation system may be a useful tool for tumor targeting and safe osteotomies in sacral tumor surgery via the posterior only approach.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.3
• /
• pp.268-271
• /
• 2013

Occipital neuralgia is a rare pain syndrome characterized by periodic lancinating pain involving the occipital nerve complex. We present a unique case of entrapment of the greater occipital nerve (GON) within the semispinalis capitis, which was thought to be the cause of occipital neuralgia. A 66-year-old woman with refractory left occipital neuralgia revealed an abnormally low-loop of the left posterior inferior cerebellar artery on the magnetic resonance imaging, suggesting possible vascular compression of the upper cervical roots. During exploration, however, the GON was found to be entrapped at the perforation site of the semispinalis capitis. There was no other compression of the GON or of C1 and C2 dorsal roots in their intracranial course. Postoperatively, the patient experienced almost complete relief of typical neuralgic pain. Although occipital neuralgia has been reported to occur by stretching of the GON by inferior oblique muscle or C1-C2 arthrosis, peripheral compression in the transmuscular course of the GON in the semispinalis capitis as a cause of refractory occipital neuralgia has not been reported and this should be considered when assessing surgical options for refractory occipital neuralgia.

• Journal of Ginseng Research
• /
• v.21 no.2
• /
• pp.69-77
• /
• 1997

In order to explain the connection between ginseng rust spot and soil ecological conditions, the bed soils and ginseng roots were sampled at different microrelief units and the reducing substances of the bed soils and iron forms of the ginseng root epi dermises were determined. The results showed that the occurrence of the rust spot was connected with the ecological conditions of the soils and the metabolism of the plant which was caused by the excessive $Fe^{2+}$ in the soil solution. Ginseng rust spot was the enrichment of iron which was mainly composed of organic complex irons. Including active ferrous active ferric and non active ferric forms and they were transformed into each other following the change of soil moisture and temperature regimes. According to the regularity of growth and decline of reducing substances in soil and rust index of ginseng roots as well as the difference of adaptability to excessive $Fe^{2+}$ in soil among different year-old seeding, a new comprehensive measure based on the connection of ameliorating soil and improving cultivation system was recommended to prevent the occurrence of ginseng rust spot.

• Journal of Forest and Environmental Science
• /
• v.36 no.1
• /
• pp.17-24
• /
• 2020

This study aimed to figure out and compare the increment of biomass by thinning intensity focused on the plantation of the two major coniferous species (Larix kaempferi and Pinus koraiensis) of South Korea. The inventory interval was three years under the effects of three types of thinning treatments; control (no thinning), light (20% thinning) and heavy (40% thinning). The results showed standing biomass increment of both species decreased as thinning intensity increased (heavylight>control). Meanwhile, the lowest of on-site biomass changes occurred in the control plot, and the greatest was in the heavy thinning plot because thinning was involved with leaving the felling residual biomass (leaves, branches and roots) on the site. According to the results from this short-term study, unthinned stands is preferable for maximizing standing biomass as well as carbon sequestration. However long-term investigation should be considered in order to see more clear results.

• Proceedings of the Ginseng society Conference
• /
• 1984.09a
• /
• pp.57-62
• /
• 1984

Four year old American ginseng plants (Panax quinquefolium L.) were grown in control and treated field plots in North Carolina, USA. Soil pH (4.4, 5.5, and 6.5), soil phosphate (19, 89 and 232 ppm) and mulch treatments (wheat straw, pine needle straw, poplar bark, oak bark, pine bark and hardwood leaves) were studied for their effects on total dry weight, total ginsenosides and 5 individual ginsenosides (A1, Rg1, Rd, Re, and Rb2). The leaf and root tissue were analyzed for ginsenosides by high pressure liquid chromatography (HPLC). The oak and poplar bark mulch treatments appeared to have the best effect upon the growth and production of roots while not significantly decreasing the ginsenoside content of the roots. The oak mulch showed a statistical increase in the ginsenoside content of the leaves.