• 한국진공학회지
• /
• 제6권S1호
• /
• pp.166-171
• /
• 1997

IBED is a very promosing thin film deposition method because of its many advantages, such as excellent adhesion property of films to substrates, room temperature processing, ease of control over the composition and thickness of films, and so on, over the conventional techniques, It has been widely applied in the field of surface modification of materials in the last decade. In our laboratory, many kinds of thin films, such as wear-resistant hard coatings, corrosion and oxidation protective coatings, biomaterial films, buffer layer for high temperature superconductor films, and oxygen sensitive film, have been synthesized by IBED, and several industrial applications of the IBED films have been conducted.

• 한국결정성장학회지
• /
• 제33권2호
• /
• pp.61-70
• /
• 2023

이 논문에서는 기존의 초전도 현상을 바라보는 물리학자들의 생각의 흐름과 한계들을 살펴보고, 통계 열역학적 액체론의 관점에서 제시한 이론적 배경을 통해 상온 상압 초전도체가 개발될 수 있음을 약술하였다. 이것이 가능 할 방안은, 전자들이 돌아다닐 수 있는 상태수가 현저히 제한되는 1-Dimension에 가까운 전자 상태이어야 한다는 것과 그 상태에 있는 전자들이 액체적 특성이 나타날 수 있을 정도로 전자-전자 상호작용이 빈번한 상태이어야 한다는 것이다. 이러한 실행 예로서 우연한 기회에 실마리를 얻어 수많은 실험으로 구조를 밝혀낸 LK-99(본 연구에서 개발한 상온 상압 초전도체의 이름)의 개발 자료를 보고하며, 이에 세계 최초로 상압에서 임계온도가 97℃를 능가하는 초전도 물질의 특성과 발견에 대한 이론적, 실험적 근거를 요약하였다.

• 한국결정성장학회지
• /
• 제33권4호
• /
• pp.165-165
• /
• 2023

• 한국결정성장학회지
• /
• 제33권3호
• /
• pp.124-124
• /
• 2023

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.5-8
• /
• 2009

MgO nanodots have been deposited and formed on top of the substrate surface. Mg was sputtered to form the MgO nanodots on the single crystal substrates by rf-sputtering method and followed by heat treatment in the oxygen ambient. The deposition and formation of MgO nanodots have been controlled systematically using the process variables such as substrate temperature, sputtering time, and rf-power. As the substrate temperature increased from the room temperature the density of MgO nanodots decreased. The optimal conditions of MgO nanodots formation using the rf-sputtering was investigated and the maximum density of more than $230/{\mu}m^2$ on single crystal substrates was obtained when the rf-power of 100 watts was applied for 30 seconds at room temperature. The typical size of MgO nanodots was identified to be <160 nm(diameter) and 4-30nm (height) by atomic force microscopy. The modulated surface morphology was examined through surface images and cross-section analysis and discussed for the artificial pinning sites in the superconducting films.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.10-13
• /
• 2023

To confirm the room-temperature superconductivity at ambient pressure as claimed in recent arXiv preprints by Lee et al., we followed the original authors' systematic solid-state synthesis recipe to reproduce Cu-doped Pb-apatite, known as LK-99. Using X-ray diffraction and Raman spectroscopy, we identified inclusion of various impurities alongside the apatite phase in our sample. While the sample exhibited an overall semiconducting behavior in electrical transport, an intriguing resistivity anomaly at 380 K was observed, possibly originating from a structural phase transition of the Cu_2-δS impurity. Based on the transport and magnetization measurements, we conclude that the sample is a non-magnetic semiconductor, with absence of superconductivity.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.34-38
• /
• 2019

Multilayered high-temperature superconductor coated conductor (CC) tapes are used in an extensive range of applications and are exposed to many stresses such as hoop stress, radial/transverse tensile stress under large Lorentz forces, and thermal stress while cooling if thermal expansion properties differ. Loads induced transversely at the tape surface inevitably create delamination phenomena in the multilayered CC tapes. Thus, delamination behaviors of CC tapes along the c-axis under transverse loading conditions, which can vary based on manufacturing process and constituent layers, must be characterized for applications. The anvil test method was used to mechanically investigate the delamination characteristics of various commercially available Ag-stabilized CC tapes at room temperature and 77 K, finding superior strength at the latter. The wide variations found depended on tape structure and fabrication technique. Fractographic morphologies of delaminated tapes supported the findings under transverse loading conditions.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권1호
• /
• pp.45-50
• /
• 2013

Closed-loop J-T (Joule-Thomson) refrigeration cycle is advantageous compared to common open loop $N_2$ decompression system in terms of nitrogen consumption. In this study, two closed-loop pure $N_2$ J-T refrigeration systems with sub-atmospheric device for cooling High Temperature Superconductor (HTS) power cable are investigated. J-T cooling systems include 2-stage compressor, 2-stage precooling cycle, J-T valve and a cold compressor or an auxiliary vacuum pump at the room temperature. The cold compressor and the vacuum pump are installed after the J-T valve to create sub-atmospheric condition. The temperature of 67 K is possible by lowering the pressure up to 24 kPa at the cold part. The optimized hydrocarbon mixed refrigerant (MR) J-T system is applied for precooling stage. The cold head of precooling MR J-T have the temperature from 120 K to 150 K. The various characteristics of cold compressor are invstigated and applied to design parameter of the cold compressor. The Carnot efficiency of cold compressor system is calculated as 16.7% and that of vacuum pump system as 16.4%. The efficiency difference between the cold compressor system and the vacuum pump system is due to difference of enthalpy change at cryogenic temperature, enthalpy change at room temperature and different work load at the pre-cooling cycle. The efficiency of neon-nitrogen MR J-T system is also presented for comparison with the sub-atmospheric devices. These systems have several pros and cons in comparison to typical MR J-T systems such as vacuum line maintainability, system's COP and etc. In this paper, the detailed design of the subcooled $N_2$ J-T systems are examined and some practical issues of the sub-atmospheric devices are discussed.

• 대한기계학회논문집B
• /
• 제35권1호
• /
• pp.93-100
• /
• 2011

액체질소 온도부근에서 작동하는 고온초전도 케이블 시스템을 개발하기 위해서는 고온초전도 케이블 시스템에 사용되는 극저온 절연재료의 정확한 열물성 자료가 필요하다. 금속재료와 달리, 비금속 계열의 재료는 열저항이 크기 때문에 정확한 열 유입량을 측정하기 위해서는 특별한 주의가 요구된다. 본 연구에서는 극저온 냉동기를 이용하여 30K 부터 상온 사이에서 절연재료의 열전도도를 정확하게 측정할 수 있는 시스템을 개발하였다. 설계와 제작과정을 포함한 열전도도 측정 시스템을 자세하게 기술하였다. 또한 상온으로부터 침입하는 불가피한 열유입량을 최소화하기 위한 열전도도 측정 시스템의 최적화 과정을 소개한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권1호
• /
• pp.44-47
• /
• 2012

The substantial improvement of the signal-to-noise ratio (SNR) can be achieved with small-size samples or low-field MRI system by high-temperature superconducting(HTS) RF coil. The typical HTS RF coil made of HTS thin film is expensive and is limited the coil geometry to planar surface coil. In this study, commercial Bi-2223 HTS tapes was used as RF coil for a 0.35T permanent MRI system. It has advantages of both much lower cost and easier fabrication over HTS thin film coil. SNR gain of the image obtained from the HTS RF coil over a conventional Cu RF coil at room temperature was about 2.4-fold and 1.9-fold using the spin echo pulse sequence and gradient echo pulse sequence respectively.