• 한국농공학회지
• /
• 제19권4호
• /
• pp.4544-4554
• /
• 1977

The objective of this study was to measure and compare the radiation heat load generated through a few chosen shade-materials that would protect animals from the direct solar radiation heat in summer condition. The results obtained from this study are as follows; 1. when the materials were used in original state, the most effective material for radiation heat reduction was slate, followed by aluminum and galvanized steel successively. 2. The radiation heat load under the white top and black underside aluminum was 2.5 Cal. per hour per square cm less than that under the bare aluminum of their diurnal peak. 3. When the modified galvanized steel was used, the radiation heat load was reduced as much as 2.4 cal per hour per square cm by attaching plywood under the galvanized steel, 3.9 cal per hour per square cm by attaching plywood and coating white paint on the top of the galvanized steel. The galvanized steel covered by hay material showes similar result as that of the galvanized steel lined with plywood. 4. In case of slate, the radiation heat reduction value was increased by using bare slate, white top slate and white-top-black-underside slate in the descending order. 5. The calculated value of radiosity of inside surface of aluminum was about 20 percent of the radiation heat load, the reduced value of radiosity by coating paint was considered to be indirect indication of the effect of total radiation heat load reduction of painted surface. 6. About an hour of the time lag of radiation heat load peak on sept. 10 for slate materials should be investigated more comprehensively in future.

• 한국주거학회논문집
• /
• 제18권1호
• /
• pp.61-72
• /
• 2007

The purposes of this study were to summarize the concept of well-being and well-being apartment, to grasp the present condition of apartments which were introduced with well-being elements, and to find out the consumer preferences on well-being elements for apartment planning. Library and internet surveys were performed to summarize the concept of well-being and well-being apartment and to grasp the present condition of apartments which were introduced with well-being elements. Questionnaire survey was carried out from 2nd to 22nd of June 2005, to investigate the preferences on well-being elements for apartment planning. The respondents were 250 residents who are from thirties to fifties and living in urban area. As results, respondents think that 'living for health of body and mind' about concept of well-being and 'certificated apartments by green building rating system' or 'apartments introduced ecological factor' about concept of well-being apartment. They answered that 'yes' about 'Do you have intention to buy well-being apartment?'. The elements in aspect of complex planning having the preference were revealed that promenade for complex design, ecological garden or walking space for landscape design, outdoor exercise space for outdoor design, and security system for foundation equipment. The elements having the preference in aspect of public facilities were fitness room for sports & health facility and study room for cultural facility. The preferred elements in aspect of building and unit design were roof garden for building design, multi-functional room for unit floor plan, natural surface material for interior surface, ventilation system for indoor environment, control system for home automation, and food waste machine for home electronics.

• Ecology and Resilient Infrastructure
• /
• 제5권3호
• /
• pp.174-179
• /
• 2018

$TiO_2$-embedded expanded polystyrene (TiEPS) balls with powdered $TiO_2$ particles embedded on the surface of EPS were developed, and the growth inhibition of Chlorella ellipsoidea, a green algae, was evaluated. The experiment was conducted using four reactors with various conditions of (A) natural sunlight, (B) natural sunlight + TiEPS balls, (C) dark, and (D) dark + TiEPS balls on the roof of the building during five days. Based on the analysis of cell number, cell morphology, concentrations of chlorophyll-a and phaeopigments, both surface reactions in heterogeneous photocatalysis and light shielding could inhibit the growth of C. ellipsoidea. The highly reactive hydroxyl radicals ($OH{\cdot}$) from TiEPS balls degraded the lipid cell membrane through the peroxidation reaction with the light shielding, eventually resulting in cell inactivation. Although dominant inhibitory effects on the growth of C. ellipsoidea were ambiguous, TiEPS balls were feasible to prevent and inhibit the excessive growth of algae in eutrophic water body.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.238-239
• /
• 2017

Waterproofing is a very important process in terms of durability of buildings. The materials used for waterproofing work to protect the concrete structure from external deterioration factors. In particular, the waterproofing materials applied to the exterior of the concrete structure have various problems due to changes in the external environment and variables in the construction process. The waterproof layer is repeatedly dried and shrunk according to changes in the external moisture environment, and the surface may be deteriorated due to exposure to long-term sunlight. In the case of the roof waterproofing in the structure, the waterproof layer which does not have a sufficient curing period shows much swelling and floating phenomenon. These defects, such as swelling and lifting, account for most of the defects that occur in the waterproof layer of the concrete slabs. Generally, it is difficult to expect the same level of performance as the initial state even if the waterproofing work is repaired when a defect occurs. Therefore, it is possible to reduce the defects of the waterproof layer such as swelling and lifting by forming a waterproof layer which can be integrated with the concrete surface by using a polyurethane type waterproofing material having a relatively low defective ratio compared to other waterproofing materials. So in this study, the basic properties of polyurethane waterproof sheet reinforced with non-woven fabric are investigated in order to understand field applicability.

• 보존과학회지
• /
• 제27권3호
• /
• pp.251-260
• /
• 2011

이 연구에서는 석조문화유산의 손상유형별 표준범례를 제시하고, 손상지도 작성방법에 대한 공정시스템을 구축하였으며, 균열지수 개발과 표면 및 3차원 손상율 평가기법을 제시하였다. 손상유형별 표준범례는 균열, 박리, 박락, 탈락, 입상분해 및 공동으로 세분한 다음 상용 그래픽 프로그램으로 제작하였으며, 손상지도는 손상 영역에 대한 정확도와 신뢰도를 높이기 위해 3차원 디지털복원과 고해상도 사진맵핑 기술을 적용하였다. 또한 균열지수를 개발하여 대상 석조문화유산의 물리적 손상도에 대한 정량평가를 수행하였고, 가상복원 모델링을 통해 탈락부의 부피와 3차원 손상율을 산출하였다. 이를 통해 마곡사오층석탑의 손상도를 정량적으로 평가한 결과, 전체적으로 북측면이 구조상 균열(1.70), 미세균열(1.34), 박락(20.2%), 탈락(13.0%)의 손상점유율이 높게 나타났으며, 1층 옥개석의 3차원 손상율은 6.7%로 산출되었다.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5619-5626
• /
• 2015

천광(Zenithal Light)은 벽의 높은 곳에 위치한 창이나 지붕의 열린 부분으로부터 내부 혹은 중정과 같은 내부와 비슷한 공간에서 하강하면서 들어오는 빛으로, 본 연구에서는 이러한 천광을 이루는 천창의 다양한 사례들과 함께 빛이 들어오는 방식에 대한 유형을 구분하고 그 특성을 살펴보았다. 즉, 천창의 가장 큰 특징을 형성하는 것 중 하나로서 빛을 실내에 유입하는 구조적인 장치에 주목하고 이러한 장치인 매개체에 따라 크게 직사광형 덕트형, 쉐이드형으로 구분하고, 각각 세부적으로 변형된 유형으로 나누었다. 즉, 직사광형은 광원 비노출형과 광원 노출형으로 덕트형천창은 집중형과 분산형으로, 쉐이드형은 천정면형, 반사판형, 이중천창형, 수직벽면형 등으로 구분될 수 있다.

• 한국터널지하공간학회 논문집
• /
• 제16권4호
• /
• pp.387-402
• /
• 2014

혼잡한 도심지에서는 지상의 공간부족에 따른 터널 구조물에 대한 시공의 필요성이 늘어나고 있다. 터널은 굴착 시 주위 지반의 교란 및 변위를 발생시키는데, 그에 따른 안정성 검토가 필요하다. 따라서 본 연구에서는 터널굴착에 따른 지반의 거동을 측정하기 위해 모형터널 장비를 개발하였다. 모형터널은 터널굴착을 모사하기 위해서 터널 내부의 일정한 물의 양을 조절하면서 외경을 축소한다. 그에 따라 발생하는 체적손실이 터널굴착에 따른 지반의 변위를 발생시킨다. 지반의 변형 측정은 근거리 사진계측기법을 사용하였으며, 이를 변위분포도와 변위벡터로 나타내었고, 유한요소 수치해석, 기존 문헌, 이론 및 경험식들과 비교하였다. 또한, 터널 천단부 강관 보강 및 무보강의 터널굴착에 따른 모형시험을 진행하여 지반의 거동을 분석하였다. 본 연구의 실내모형터널시험은 지반의 자세한 변위 데이터를 얻기 위해 흙으로 가정한 알루미늄봉과 근거리 사진계측을 사용한 이상화된 2차원의 연구이다. 그 결과, 유한요소 수치해석에서의 흙의 변형 패턴이 실제 모형 시험과 상당히 유사함을 확인 및 검증 할 수 있었다.

• Wind and Structures
• /
• 제4권3호
• /
• pp.177-196
• /
• 2001

At present the most popular turbulence models used for engineering solutions to flow problems are the $k-{\varepsilon}$ and Reynolds stress models. The shortcoming of these models based on the isotropic eddy viscosity concept and Reynolds averaging in flow fields of the type found in the field of Wind Engineering are well documented. In view of these shortcomings this paper presents the implementation of a non-linear model and its evaluation for flow around a building. Tests were undertaken using the classical bluff body shape, a surface mounted cube, with orientations both normal and skewed at $45^{\circ}$ to the incident wind. Full-scale investigations have been undertaken at the Silsoe Research Institute with a 6 m surface mounted cube and a fetch of roughness height equal to 0.01 m. All tests were originally undertaken for a number of turbulence models including the standard, RNG and MMK $k-{\varepsilon}$ models and the differential stress model. The sensitivity of the CFD results to a number of solver parameters was tested. The accuracy of the turbulence model used was deduced by comparison to the full-scale predicted roof and wake recirculation zone lengths. Mean values of the predicted pressure coefficients were used to further validate the turbulence models. Preliminary comparisons have also been made with available published experimental and large eddy simulation data. Initial investigations suggested that a suitable turbulence model should be able to model the anisotropy of turbulent flow such as the Reynolds stress model whilst maintaining the ease of use and computational stability of the two equations models. Therefore development work concentrated on non-linear quadratic and cubic expansions of the Boussinesq eddy viscosity assumption. Comparisons of these with models based on an isotropic assumption are presented along with comparisons with measured data.

• 대한건축학회논문집:계획계
• /
• 제36권4호
• /
• pp.71-81
• /
• 2020

The purpose of this study is to propose the planning methods for pollution prevention in the initial design stage by identifying the pollution phenomena on the exterior of the building. It is important to catch the problem early on because exterior troubles begin with an initial design defect and causes rapid aging. The scope of this study is seoul public borough offices that should be sustainable for long as landmark located at the center of the district. Field survey was conducted three times in six months. Twenty-six borough offices were diagnosed with three levels of contamination through visual inspection and the contaminated locations, types, materials, and characteristics were checked. Fourteen common contaminated locations were identified in the first and intensively rechecked in the second. Five locations vulnerable to contamination were designated and the contamination and cleanliness situations were checked by location in the third. As a result, main polluted types and locations are sloping wall, upper wall, protruded wall, canopy, and wall under window. The key to avoiding these pollution problems is to minimize the horizontal plane on which dust can be deposited. In other words, it can be considered variously by shape and location, such as the slope of the horizontal plane, the floating of the surface, the installation of the roof surface, and the vertical louvers. And throating plans and material plans suitable for each location are presented. Various methods of the shape and location, material are expected to use as useful basic data for preventing pollutions during the initial design stage.

• 보존과학회지
• /
• 제26권3호
• /
• pp.295-310
• /
• 2010

금산사미륵전벽화는 사찰벽화에서 나타나는 손상상태 중에서도 극히 심각한 상태에 놓여있다. 이들 벽화에 대한 보존처리에 앞서 벽화의 구조, 특성, 손상유형 및 원인 등 거시적 관점에서 사전조사를 하고 그 결과에 대한 평가를 실시하였다. 손상이 가장 심한 곳은 건물의 남측으로, 채색층과 마감층의 손상이 두드러지는 것으로 조사되었다. 채색층과 마감층 일부가 도막을 형성하며 얇은 두께로 벽체로부터 박리 박락되었으며, 상태가 심한 경우는 마감층 전체가 이탈되기도 하였다. 주요 손상원인은 건물 하중으로 인한 벽체의 균열 및 파손과 과거 보존처리에 사용된 보강재의 열화로 판단된다. 채색층 및 마감층의 손상은 환경적인 요소에서 기인하는 온습도 편차, 자외선으로 인한 물리화학적 손상과 과거 적용된 합성수지 고분자물질의 기계적 물성저하로 인한 영향 등이 상호 복합적으로 작용하여 발생한 것으로 보인다. 벽체의 균열, 박락과 과거 보강부위 이탈 등의 손상은 사찰벽화와 물성이 다른 보강재료의 사용과 유럽식 이전복원 공법의 무리한 적용에서 비롯되었다고 판단된다.