• Wind and Structures
• /
• 제17권5호
• /
• pp.495-513
• /
• 2013

Thin, high-strength steel roof cladding is widely used in residential and industrial low-rise buildings and is susceptible to failure during severe wind storms such as cyclones. Current cladding design is heavily reliant on experimental testing for the determination of roof cladding performance. Further study is necessary to evolve current design standards, and numerical modelling of roof cladding can provide an efficient and cost effective means of studying the response of cladding in great detail. This paper details the development of a numerical model that can simulate the static response of corrugated roof cladding. Finite element analysis (FEA) was utilised to determine the response of corrugated cladding subject to a static wind pressure, which included the anisotropic material properties and strain-hardening characteristics of the thin steel roof cladding. The model was then validated by comparing the numerical data with corresponding experimental test results. Based on this comparison, the model was found to successfully predict the fastener reaction, deflection and the characteristics in deformed shape of the cladding. The validated numerical model was then used to predict the response of the cladding subject to a design cyclone pressure trace, excluding fatigue effects, to demonstrate the potential of the model to investigate more complicated loading circumstances.

• 한국전통조경학회지
• /
• 제39권3호
• /
• pp.56-64
• /
• 2021

정자는 전통 조경에서 중요한 경관적 장치이자 공간을 구성하는 대표적인 시설이다. 전통 조경공간에 대한 해석과 계승을 위해서는 전통 정자의 형상과 구조에 대한 연구도 동반되어야 한다. 하지만 전통 정자의 양식과 구조에 관한 연구는 찾아보기 어렵다. 이에 본 연구는 정자의 형상을 결정짓는데 가장 비중이 큰 지붕부를 대상으로 구조적 특성의 규명을 목적으로 하였다. 연구결과는 다음과 같다. 구조를 파악할 수 있는 15개의 한칸형 전통 사각정자를 대상으로 분석한 결과 한 칸 정자의 지붕부의 유형을 구분짓는 주요 부재는 보, 종도리, 동자임을 확인하였다. 지붕 부재의 유무에 따라 정자는 보, 보+종도리보+동자, 종도리, 동자 등 5가지 유형으로 분류되었다. 또한 지붕부의 형상 분류를 토대로 보에 작용하는 하중과 결구를 분석한 결과 한칸형 전통 사각정자에서 보가 수장과 하중의 균형을 이루는 역할을 하기 위한 것임을 확인하였다. 본 연구는 정자 지붕부의 형태와 부재의 역할과 기능에 대해 크기, 비율, 하중 등으로 면밀하게 해석을 시도하였다는 점에서 의의가 있다.

• 한국농촌건축학회논문집
• /
• 제5권1호
• /
• pp.42-61
• /
• 2003

The purpose of this study was to analyze the characteristics of wooden anglican church architecture in Chungcheong area. For this study, I have selected ten anglican churches, and have studied the characteristic through the actual survey and analysis. This study focuses on the architectural characteristics and evolution of wooden anglican church in chungcheong area, based on the actual survey and historical analysis. The results of this study is as follows:1)The shape of plan is long axis composed of the entry and altar. 2)The shape of elevation is composed of the roof form and existence and nonexistence of bell-tower. 3)The shape of section in divided into one kan and three kan way, by the existence and nonexistence of a row of columns in the interior. 4)The structure and design follows roof-framing.

• Wind and Structures
• /
• 제7권6호
• /
• pp.359-372
• /
• 2004

Wind tunnel model studies were carried out to determine the wind load distribution on tributary areas near the gable-end of large, low-rise buildings with high pitch planar and curved roof shapes. Background pressure fluctuations on each tributary area are described by a series of uncorrelated modes given by the eigenvectors of the force covariance matrix. Analysis of eigenvalues shows that the dominant first mode contributes around 40% to the fluctuating pressures, and the eigenvector mode-shape generally follows the mean pressure distribution. The first mode contributes significantly to the fluctuating load effect, when its influence line is similar to the mode-shape. For such cases, the effective static pressure distribution closely follows the mean pressure distribution on the tributary area, and the quasi-static method would provide a good estimate of peak load effects.

• 터널과지하공간
• /
• 제28권2호
• /
• pp.142-155
• /
• 2018

${\bigcirc}{\bigcirc}$광산은 광체주변에 미고결된 층서가 불규칙하게 발달되어 있다. 본 연구는 효율적인 루프볼트(roof bolt) 시공을 위하여 불규칙한 층서의 두께를 체계적으로 배열하고 이에 대응하는 지보시스템을 제시한 것이다. 층서별 두께를 조합한 81개의 경우의 수를 강건설계에 의하여 9개의 사례로 한정하여 지보설계를 하였다. 각 사례에 대하여 천반하중으로 작용할 수 있는 하중고를 층서의 특성과 RMR에 의하여 결정하였다. 하중고에 의한 하중범위를 블록형상과 아치형상으로 가정하여 계산하였다. 두 방법의 평균하중으로 루프볼트의 지보력을 감안한 지보설계를 하였다. 지보설계에 대한 수치해석 결과 케이블 볼트는 선단정착 방식보다 전면접착 방식이 천반유지에 더 효과적인 것으로 분석되었다. 시공결과 천반의 컨트롤은 가능하였으나 갱도측벽의 변형으로 천반 전체가 하부로 조금씩 침강하는 현상을 보였다.

• 한국환경복원기술학회지
• /
• 제15권1호
• /
• pp.107-117
• /
• 2012

We estimated the potential area roof greening in Gyeonggi-do that will mitigate the heat island effect. The estimation was based on building age, roof shape, and building use which were recorded in the building register from "Sewoomteo, the Building Administration System in the Ministry of Land, Transport and Maritime Affairs. The estimated potential roof greening area in Gyeonggi-do was approximately $102.5km^2$ assuming that the buildings for residence, public, education(school), office, shopping mall are appropriate for roof greening. The area occupied by apartment buildings over six-story was 76.3% of the potential roof greening area 10.2% for individual houses, 5.9% for under five-story apartment buildings, and 3.7% for school buildings. The result indicated that it is residential buildings that we need to pay attention for roof greening, especially high-rise buildings over six-story. Greening of the whole estimated area, $102.5km^2$, in Gyeonggi-do will result in the increase of green space per capita by $8.74m^2$. This is 1.65 times greater than the area of current urban parks, and 1.97 times greater than the total area of neighborhood parks, children's parks, and pocket parks. Greening of the estimated roof area will increase green coverage of urban area by twice, adding to current green coverage of the urban areas, 11.3%, in 10 major cities. In particular, the effect of roof greening would be remarkable in inceasing the green space of Anyang City, Gwangmyeong City, and Guri City where neighborhood park area falls short.

• 한국공간구조학회논문집
• /
• 제13권1호
• /
• pp.51-57
• /
• 2013

There can be diverse causes in the destruction of a large space structure by strong wind such as characteristics of construction materials and changes in internal and external wind pressure of the structure. To evaluate the wind pressure of roof against the large space structure, wind pressure experiment is performed. However, in this wind pressure experiment, peak internal pressure coefficient is set according to the opening of the roof in Korea wind code. In this article, it was tried to identify the change of internal pressure coefficient and the characteristics of wind pressure coefficient acting on the roof by two kinds of opening on the side of the structure with Hyperbolic Paraboloid Spatial Structures roof. When analyzing internal pressure coefficient according to roof shape, it was found that minimum (52%) and maximum (30%~80%) overestimation was made comparing to partial opening type proposed in the current wind load. It is judged that evaluation according to the opening rate of the structure should be made to evaluate the internal pressure coefficient according to load.

• Wind and Structures
• /
• 제19권6호
• /
• pp.603-621
• /
• 2014

Past high speed wind events have exposed the vulnerability of the roof systems of existing light-framed wood structures to uplift loading, contributing greatly to economic and human loss. This paper further investigates the behaviour of light-framed wood structures under the uplift loading of a realistic pressure distribution. A three-dimensional finite-element model is first developed to capture the behaviour of a recently completed full-scale experiment. After describing the components used to develop the numerical model, a comparison between the numerical prediction and experimental results in terms of the deflected shape at the roof-to-wall connections is presented to gain confidence in the numerical model. The model is then used to analyze the behaviour of the truss system under realistic and equivalent uniform pressure distributions and to perform an assessment of the use of the tributary area method to calculate the withdrawal force acting on the roof-to-wall connections.

• KIEAE Journal
• /
• 제12권1호
• /
• pp.91-98
• /
• 2012

The purpose of this study is to analyze the diversity of architectural characteristics of traditional Hanok using Pyonjakbub(變作法). The roof is essential element of Hanok and the proportion of the roof accounts for about a half of the Hanok elevation. The shape of a roof of Hanok has made by the structural method like Pyonjakbub. For this study, the investigation report of 'Korean traditional houses' and 'Cultural assets of wooden traditional house' published by Cultural Heritage Administration were used as it's references. The results of this study are as follows; Pyonjakbub is appeared differently according to the region and the house dates and it has strongly influenced the architectural characteristics of traditional Hanok-the width of a room, the cross section of inner space of a roof and the length of eaves, etc. In other words, the architectural characteristics of Hanok will be changed by using different Pyonjakbub. Using the proper Pyonjakbub, we will provide more satisfaction to the client who wishes to live in Hanok.

• 소성∙가공
• /
• 제15권3호
• /
• pp.241-246
• /
• 2006

The isotropic steel sheet was developed and started to apply on the auto-body outer panel, however the characteristics of application on auto-body were not well known. In this paper the FE analysis of outer panel of auto-body was carried out to investigate the characteristics of isotropic steel sheet. For the FE analysis of the roof panel of ULSAB body the isotropic steel sheet and the bake hardening steel sheet were used. The Isotropic steel sheet shows more deformation at punch bottom area of roof panel than the bake hardening steel sheet that is most required forming properties far outer panel to obtain the shape likability of forming parts. It is shown that the isotropic steel sheet has suitable material properties far outer panels of auto-body.