• 소성∙가공
• /
• 제22권5호
• /
• pp.250-257
• /
• 2013

A series of finite element analyses of the rolling process were performed and a neural network algorithm was employed to calculate the amount of ski-effect for an arbitrary thickness of incoming material in the roll gap. Pilot hot plate rolling tests were also conducted to verify the usefulness of the finite element analyzes conducted in this study. In these experiments, plates with thicknesses varying from 25 to 65 mm were tested. In addition, a number of rolling reductions of up to 31% were examined. Finally, a number of circumferential upper and lower rolls were investigated. Experimental validations demonstrated that the neural network algorithm predicted the proper amount of ski when rolling conditions(material thickness, reduction ratio, roll velocity differential) changed arbitrarily.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.455-470
• /
• 2013

This paper presents a theory concerning the beam element subjected to an eccentric rolling disk (or simply called the eccentric-disk-loaded beam element) such that the dynamic responses of a beam subjected to an eccentric rolling disk with its inertia force, Coriolis force and centrifugal force considered can be easily determined. To this end, the property matrices of an eccentric-disk-loaded beam element are firstly derived by means of the Lagrange's equations. Then, the overall property matrices of the entire vibrating system are determined by directly adding the property matrices of the eccentric-disk-loaded beam element to the overall ones of the entire beam itself. Finally, the Newmark direct integration method is used to solve the equations of motion for the dynamic responses of a beam subjected to an eccentric rolling disk. Some factors relating to the title problem, such as the eccentricity, radius and rotating speed of the rolling disk, and the Coriolis force and centrifugal force induced by the rolling disk are investigated. Numerical results reveal that the influence of last factors on the dynamic responses of the pinned-pinned beam is significant except the centrifugal force.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.376-385
• /
• 1991

본 연구에서는 그루브의 각도에 따라 그루브 에징을 한 형상과 상사하게 가상 의 슬라브를 제작하여 오버랩에 영향을 미치는 압연인자들을 분석하고 그 영향을 검토 함으로써 최적 G 롤의 각도를 결정하였고, 최적인 G 롤의 형상으로 에저를 제작하여 G 에징량에 따른 오버랩량의 변화를 고찰하였다.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.935-944
• /
• 1987

본 연구에서는 금속 표면의 정밀가공법을 연구대상으로 하여 구상흑연주철시 편을 미량의 테이퍼로 연삭가공하고 NACHI 6000ZZ 볼 베어링을 로울러로 사용하여 로 울러 다듬질을 행함으로써 로울러 지름 변화에 따른 가압력이 표면조도에 미치는 영향 을 구명하는데 목적을 두었으며 아울러 로울링(rolling)회수에 따른 펴면조도, 경도 및 직경의 변화량을 실험적으로 구명하였다.

• 소음진동
• /
• 제10권3호
• /
• pp.444-450
• /
• 2000

Wheel-rail noise is normally classified into three catagories : rolling impact and squeal noise. In this paper rolling noise caused by the irregularity between a wheel and a rail is analysed as follows: The irregularity between the wheel and the rail is assumed as linear superposition of sinusoidal profiles. Wheel-rail contact stiffness is linearized by using Hertzian contact theory and then contact force between the wheel and the rail is calculated. vibration of the rail and the wheel is calculated theoretically by receptance method or FEM depending on the geometry of the wheel or the rail for the frequency range of 100-500 Hz important for noise generation. The radiation noise caused by those vibration response is computed by BEM To verify this analysis tools rolling noise is calculated by proposed analysis steps using typical roughness data and these results are compared with experimental rolling noise data. This analysis tools show reasonable results and finally used for the prediction of the Korean high speed train rolling noise.

• 소성∙가공
• /
• 제19권3호
• /
• pp.160-166
• /
• 2010

In this paper, the process parameters of thread rolling were designed based on the numerical analysis results. Firstly, the effective analysis conditions that guarantee the reliability of the analysis results were found. To find the effective analysis conditions, the analyses were carried out for various numbers of teeth. And then, the effects of the process parameters such as tool shape and temperature on the thread rolling performance were investigated. The formability in thread rolling process was evaluated in terms of Cockcroft-Latham damage value. In order to evaluate formability, Cockcroft-Latham damage value was normalized by the critical damage value which was obtained from the analysis of uniaxial tensile test. The analyses were carried out using DEFORM-3D. The results showed that the flank angle and crest round had an effect on the thread rolling load. It was also shown that temperature had significant effects on the effective strain distribution, rolling load, and damage. With the reduced formability of stainless steel at higher temperature, it was shown that the normalized damage values increased as the process temperature.

• The Journal of Korean Physical Therapy
• /
• 제6권1호
• /
• pp.133-145
• /
• 1994

The purpose of this study were 1) to describe the rolling movements of the twenties, 2) to identify developmental sequences of three body regions and 3) to evaluate the influence gender might have on the movement patterns used for rolling. Fifty males(mean 23.2 years of age) and fifty females(mean 21.1 years of age) performed the 10 trials of rolling from a supine to a prone position while being videotaped. Individual videotaped trials were classified using the described categories for upper extremity, lower extremity and head-trunk component. The most common combination of movement patterns described. The results of this study were as follows : 1. Only $16\%$ of males and $12\%$ of females demonstrated a same combination of movements during rolling. 2. Gender differences were found in the incidence of movement patterns of each body region. 3. This study determined if head-trunk anion might develop in advance of limb action. 4. This study determined if upper extremity action might develop in advance of lower extremity action. The variability of adults' rolling movement provides physical therapists with numeous movement combinations that might be used when teaching patterns to rolling.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.544-548
• /
• 2007

In general, final width of hot strip should be accomplished in this stage because width reduction of strip hardly appears during typical finishing mill. However, it is difficult to control the width of strip in the roughing mill process as the horizontal rolling of strip is subsequently performed after the vertical rolling. It is therefore important to obtain the deformation rolling direction on strip width to minimize the width spread of strip during horizontal rolling after vertical rolling. Generally there is Sizing press type and Edger-roll type. The width reduction process in sizing press has small amount of width spread compared with the edger. However, productivity by the sizing press process is much lower than those of the edger. In this study, sizing press and Edger-roll process parameters in a sheet rolling mill were set at specified values and the effect of the change in these parameters on product quality and process performance were evaluated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.373-376
• /
• 2006

The ring rolling design for a large-scale Ti-6Al-4V alloy ring was performed with a calculation method and FEM simulation. The ring rolling design includes geometry design and optimization of process variables. The calculation method was to determine geometry design such as initial billet and blank size, and final rolled ring shape. A commercial FEM code, SHAPE was used to simulate the effect of process variables in ring rolling on the distribution of the internal state variables such as strain, strain rate and temperature. In order to predict the forming defects during ring rolling, the process-map approach based on Ziegler's instability criterion was used with FEM simulation. Finally, an optimum process design to obtain sound Ti-6Al-4V rings without forming defects was suggested through combined approach of Ziegler's instability map and FEM simulation results.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.746-755
• /
• 1997

This paper addresses the systematic procedure using sequential approach for the analysis of the coupled thermo-mechanical behavior of a steady rolling tire. Not only the knowledge of mechanical stresses but also of the temperature loading in a rolling tire are very important because material damage and material properties are significantly affected by the temperature. In general, the thermo-mechanical behavior of a pneumatic tire is highly complex transient phenomenon that requires the solution of a dynamic nonlinear coupled themoviscoelasticity problem with heat source resulting from internal dissipation and friction. In this paper, a sequential approach, with effective calculation schemes, to modeling this system is presented in order to predict the temperature distribution with reasonable sccuracies in a steady state rolling tire. This approach has the three major analysis modules-deformation, dissipation, and thermal modules. In the dissipation module, an analytic method for the calculation of the heat source in a rolling tire is established using viscoelastic theory. For the verification of the calculated temperature profiles and rolling resistance at different velocities, they were compared with the measured ones.