본 연구는 무기재료 중 층상형 점토를 사용하고 유기물질로는 수용성고분자를 주재료로 이용하여 제조한 새로운 형태의 접지저감제의 특성에 관한 것이다. 위 접지저감제는 수분을 흡습하게 되면 수용성 고분자가 수분에 용해되어 고분자 체인들이 수분에 분산되며 이 분산된 고분자 체인들이 수분과 함께 층상형 점토의 충으로 삽입되는 과정으로 성능을 발휘하게 된다. 이렇게 제조된 유/무기 복합재료형 접지저감제는 함수율이 매우 우수하고 팽창률도 우수할 뿐 아니라 300wt%의 수분을 공급 후 측정한 전기전도도도 우수하여 접지저감제로서의 장점을 가지고 있다. 접지시스템에 시공시 기존의 저감재보다 적은 양을 사용하여 동일한 접지저항을 얻을 수 있으며 환경적으로나 화학적으로 매우 안전하여 접지봉의 부식이나 전식을 방지할 수 있어 토양의 오염도 방지한다. 또한 부재료로 사용되는 여러 종류의 실리카를 이용하여 주재료와 함께 접지시스템에 작용하여 낮은 접지저항을 얻는데 시너지효과를 발휘하며 염분 및 부식성이 높은 화학이온 성분을 갖는 토양에서도 안정적인 접지저항을 나타내는데 도움을 준다. 실제 시공 비교에서 일반 접지동봉에 적용하였을 때 미사용 시보다 7-8배의 접지저항 저감효과를 보였다.
The flow characteristics of reactor fuel assembly always intrigue the designers and the experimentalists among the myriad phenomena that occur simultaneously in a nuclear core. In this work, the visual experimental method has been developed on the basis of refraction index matching (RIM) and particle image velocimetry (PIV) techniques to investigate the detailed flow characteristics in China fast reactor fuel subassembly. A 7-rod bundle of simulated fuel subassembly was fabricated for fine examination of flow characteristics in different subchannels. The experiments were performed at condition of Re=6500 (axial bulk velocity 1.6 m/s) and the fluid medium was maintained at 30℃ and 1.0 bar during operation. As for results, axial and lateral flow features were observed. It is shown that the spiral wire has an inhibitory effect on axial flow and significant intensity of lateral flow mixing effect is induced by the wire. The root mean square (RMS) of lateral velocity fluctuation was acquired after data processing, which indicates the strong turbulence characteristics in different flow subchannels.
Sung-Min Kim;Woon Young Lee;Sekown Oh;Sang-Yul Lee
한국표면공학회지
/
제56권6호
/
pp.401-411
/
2023
This study investigates the synthesis, characterization, and application of zinc oxide (ZnO) nanoparticles for corrosion resistance and stress corrosion cracking (SCC) mitigation in high-temperature and high-pressure environments. The ZnO nanoparticles are synthesized using plasma discharge in water, resulting in rod-shaped particles with a hexagonal crystal structure. The ZnO nanoparticles are applied to Alloy 600 tubes in simulated nuclear power plant atmospheres to evaluate their effectiveness. X-ray diffraction and X-ray photoelectron spectroscopy analysis reveals the formation of thermodynamically stable ZnCr2O4and ZnFe2O4 spinel phases with a depth of approximately 35 nm on the surface after 240 hours of treatment. Stress corrosion cracking (SCC) mitigation experiments reveal that ZnO treatment enhances thermal and mechanical stability. The ZnO-treated specimens exhibit increased maximum temperature tolerance up to 310 ℃ and higher-pressure resistance up to 60 bar compared to non-treated ZnO samples. Measurements of crack length indicate reduced crack propagation in ZnO-treated specimens. The formation of thermodynamically stable Zn spinel structures on the surface of Alloy 600 and the subsequent improvements in surface properties contribute to the enhanced durability and performance of the material in challenging high-temperature and high-pressure environments. These findings have significant implications for the development of corrosion-resistant materials and the mitigation of stress corrosion cracking in various industries.
해양콘크리트 구조물의 내구성은 염분의 침투와 확산에 의해 심하게 저하한다. 이로 인해 많은 연구자들이 해양구조물에 대한 내구성을 향상시키기 위한 연구를 수행하여 왔다. 이 연구에서는 광물질 혼화재, 코팅철근, 부식억제제를 사용한 휨 부재에 대하여 4점 휨 시험을 수행함으로써 휨 거동을 비교 평가하고 해양구조물로의 적용성을 검토하였다. 결과에 따르면, 광물질 혼화재와 부식억제제는 초기균열 안전성과 휨 저항에 효율적인 것으로 나타났다. 내구성 재료를 사용하여도 동일 휨 모멘트 구간에서의 인장철근 응력 변화는 적고 부재도 안정된 거동을 보인다. 또한, 내구성 재료를 사용한 부재의 균열간격도 크지 않게 나타났다.
Newmark방법과 같은 직접시간적분법은 시간증분 구간 사이에서 하중이 변하더라도 하중값을 그 시간 구간에서 일정한 하중으로 사용하기 때문에 일정진폭하중과 같은 연속적인 하중함수를 불연속적인 하중함수로 가정하고 수치계산을 수행한다. 따라서 이러한 하중함수의 근사에 따른 오차로 인하여 정확한 수치결과를 계산할 수 없다. 이에 반해, Gurtin의 변분식 에 기초한 유한요소방정식은 하중함수를 시간이력에 대하여 합성적분하여 계산한다. 따라서 시간증분 구간에서 하중이 변하더라도 연속적인 하중함수의 곡선을 따라 가면서 계산하기 때문에 신뢰할 수 있는 수치결과를 구할 수 있다. 본 논문에서는 1차원 막대의 자유단에서 일정진폭하중을 받는 문제를 수치해석하여 Gurtin방법이 Newmark방법 보다 일정진폭하중을 받는 문제에 더 적합한 방법임을 보인다. 또한, Gurtin방법이 일정한 하중을 받는 문제보다 일정진폭하중을 받는 문제에 더 효과적인 방법임을 보인다. Gurtin방법을 FORTRAN으로 프로그래밍하여 해석한 수치결과와 해석용 소프트웨어인 ADINA의 Newmark방법에 의한 수치결과를 비교하여 제시된 수치해의 정확성과 타당성을 검증한다.
Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoration, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of $5{\times}5{\times}25mm$. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respecitvely. Porcelain glass transition temperatures and expansion values were derived alloy-porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal-porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated: 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than that of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly 5. Alloy-porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.
제강 환원슬래그(steelmaking reduction slag)를 출발물질로 사용하여 다양한 농도의 $H_2SO_4$, $NH_4NO_3$(0.3, 0.5, 0.7, 1 M) 용액, 반응온도 $100^{\circ}C$와 $150^{\circ}C$의 조건에서 Ca 용출 및 탄산화 실험을 실시하였다. 양이온 용출과 탄산화 반응시간은 각각 2시간 및 1시간이었으며 탄산화 효율 증대를 위해 pH는 약 12로 조절하였고 $CO_2$의 부분압은 10 bar이었다. TG 분석결과로부터 탄산화율을 계산한 결과, $H_2SO_4$ 0.5 M과 반응온도 $150^{\circ}C$의 실험 조건에서 약 86%의 고정화율이 관찰되었으나 이 이상의 농도에서는 탄산화율은 급격히 감소하였다. 그러나 $NH_4NO_3$용액을 사용한 결과, 산의 농도가 증가함에 따라 탄산화율도 비례적으로 증가하여 1 M 농도에서 약 93%의 탄산화율이 관찰되었다. 따라서 제강 환원슬래그를 사용한 탄산화반응은 $H_2SO_4$보다는 $NH_4NO_3$용액을 사용할 경우 유리한 것으로 분석되었다. SEM 분석결과, 합성된 아라고나이트는 나무토막 형태(wood piece shape), 둥근형태(round shape), 꽃모양(flower shape)으로 관찰되었으며, 방해석은 결정면이 잘 발달된 능면체형(rhombohedral shape)의 전형적인 형태로 확인되었다.
Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoratoin, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of 5 x 5 x 25mm. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respectively. Porcelain glass transition temperatures and expansion values were derived alloy- porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal- porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated : 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly. 5. Alloy- porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.
하구둑과 같은 횡단구조물이 없는 자연 하구인 한강하구는 바다와 하천을 연결하는 생태통로로서 생물종 다양성이 풍부하여 생태 가치가 높다. 한강하구에서는 유사분급이 입체적으로 다양하게 분포하여 기후변화 및 하천개발 등과 같은 여러 변화 요인에 따라 하상구조가 민감하게 변하는 특성이 나타난다. 이러한 현상은 하도육역화와 하도복단면 발달의 원인이 된다. 국가습지보호지역으로 지정된 장항습지에서는 하도 지형변화에 따라 식물천이가 현저하다. 본 연구 목적은 이에 대한 현장 조사를 실시하여 습지형성 기작을 규명하는 데 있다. 조사연구 결과, 인위적으로 조성된 것으로 추정되는 초기의 장항습지가 이후 성장하는 과정에 유량에 따른 하도 미지형 변화와 식물천이 사이에 상호 밀접하게 작용하는 것으로 드러났다. 즉 하상의 주재료(모래)가 아닌 부재(Sub-materials of river bed)인 점성의 표층 하상재료(워시로드 성질의 미세립사)가 선구식물(새섬매자기 등)에 포집되면서 복단면 형태(습지)로 성장하는 데 매개 역할을 한 것으로 나타났다. 습지가 하도복단면 형태로 발달한 후에는 선구식물이 다른 식물종으로 천이되는 양상도 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.