• Journal of the Korean Geotechnical Society
• /
• 제17권6호
• /
• pp.111-121
• /
• 2001

Rockfall protection fences are used for diminishing rockfall damage in roads side slopes. In order to install the fences in effective way, the conditions of rock slopes and total predicted impact energy of fa11ing rock should be considered. However, the fences have been constructed without any consideration for lithology, height and slope angle of rock slope in Korea. In addition, the information about the performance of the protection fences, which should be evaluated by in-situ test or laboratory test in order to check out the practical use in the field, is not available. Therefore, in design manual for the rockfall protection fence, the specific details for the installation of this type of fence are not provided yet. The full sized rockfall in situ test was carried out for the calculation of falling energy of rock and the evaluation of the maximum energy absorbing capacity of fence. For this test, the rock slopes whose heights are about 20 m and dip angle of 65 degree, have been chosen. This is because those geometries are mean height and slope angle of most road cut slopes along Korean national highway. Based on the preliminary simulation procedure, four different sizes of concrete ball (0.7, 1.3, 2.3 and 4.3 ton) were prepared and flour different types of protection fence were constructed. The results of this test provide information about the maximum energy absorbing capacity of the fence, kinetic energy of rockfall and restitution coefficient, and these results can be utilized in the establishment of rockfall fence design and construction manual.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.68-81
• /
• 2003

Rockfall protection fence is one of the most common rockfall protection methods in Korea. If rockfall protection fences are required along the road or railway, their location, height and capacity, in terms of the maximum kinetic energy that they can absorb, should be specified. Within this paper, the best practice of rockfall barrier is introduced. Modern rockfall simulations as a means to define risks, protection requirements, dynamic loading and height of potential structures and selection of appropriate placement is presented. Technical possibilities of rockfall barriers and their actual limits are presented. Safety concepts based on probabilities approaches are proposed. Recent studies performed in other countries show that Flexible Barriers are also a feasible system to stop and retain debris flows. Finally an outlook onto further development is given.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제34권3호
• /
• pp.129-135
• /
• 2021

Rock sheds are a type of rockfall protection facility that is installed on the road near steep slopes, where large amount of rockfall is expected. Rock sheds are generally designed to resist approximately 200 kJ to 3,000 kJ of rockfall energy. In a previous study, a new type rock shed structure having a concrete-filled tube (CFT) main frame was proposed. By using CFT as the main frame in a rock shed, rapid construction is possible. Additionally, high load carrying capacity and ductility can be achieved. The behavior of the proposed rock shed structure was studied via elastic analysis with the equivalent static load of rockfall energy as in a previous study. However, it is necessary to investigate the behavior of the proposed rock shed in more detail with a full 3D finite element (FE) model considering realistic rockfall load. The FE model for the CFT rock shed main frame was developed first in this study. Then, the resistance of the CFT rock shed main frame Under ultimate rockfall energy was investigated.

• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2000년도 사면안정 학술발표회
• /
• pp.139-151
• /
• 2000

Rockfall protection fence is one of the most common rockfall protection measures in Korea. The fences have been constructed in almost every hazardous cutslopes along national highway in Korea. However, the capability and performance of the fence as rockfall protection system are seldom known since no field test which can provide information on the response and the behavior of fence was carried out. This is the first full scaled rockfall test in Korea. The objectives of the test are to provide the information on the behavior and the capability of fence and to propose the design specifications for the fence. In this test, four different systems have been selected and tested. For each test, the rockfall impact energy was analyzed and the response and behavior of the system were investigated.

• Journal of the Korean GEO-environmental Society
• /
• 제21권12호
• /
• pp.11-16
• /
• 2020

It is necessary to assess the proper performance of the existing rockfall prevention net in order to minimize the damage to human lives and property in the event of rockfall. However, there is no standard for performance evaluation of rockfall prevention net in Korea, and only the design of rockfall prevention net exists by calculating energy that can be absorbed energy. Therefore, laboratory pullout test was conducted for the performance evaluation of the rockfall prevention net, cuts and load-displacement characteristics of the PVC coating net used in the laboratory pullout test are determined to identify the performance of the rockfall prevention net.

• Journal of the Korean GEO-environmental Society
• /
• 제24권3호
• /
• pp.15-21
• /
• 2023

Although standards related to falling stone facilities are established in Korea, the absorption energy of the rockfall prevention net is evaluated from the passage of rockfall and destruction of the rockfall prevention net on field test. The existing PVC coating net does not sufficiently suppress the rockfall load and tears frequently occur, and a high-strength wire rockfall net was developed to prevent. In this study, the performance was analyzed through field tests of the existing PVC coating net and the developed high-strength rockfall net (1,000 MPa, 2,000 MPa).

• Journal of the Korean GEO-environmental Society
• /
• 제23권2호
• /
• pp.37-47
• /
• 2022

Recently, with the establishment of active stabilization measures, large-scale collapse of slopes is decreasing. However, the frequency of rockfalls due to the destabilization of floating stones or boulder within or above the slope has not been decreased significantly. As a measure for stabilizing rockfall and disaster prevention, protection methods such as rockfall barriers and rockfall protection nets are typically applied. However, the approach to catching the rockfall in a catchment area by reducing the energy of the rockfall and changing the rolling condition of the rockfall is relatively insignificant. Therefore, in this study, using a general-purpose rockfall simulation program, the change in the rolling characteristics of rockfall according to the specifications of the ditch installed under the slope was investigated. It is expected that the research results can be used as basic data to determine the specifications of the ditch that can be applied to general roads or trails.

• The Journal of Engineering Geology
• /
• 제24권3호
• /
• pp.373-381
• /
• 2014

It is difficult to predict the magnitude of a rockfall with respect to the shape, volume, and weight of the rock mass, as a rockfall exhibits erratic behavior that depends on the slope geometry, such as the height and dip of the slope. In this study, a field survey was conducted on the slopes of Ulleung-Do, South Korea, where rockfalls frequently occur along coastal roads, to classify the mode of rockfalls and estimate their magnitude. This study also analyzed the effects of rockfall behavior on roads by applying a simulation technique. Agglomerate and trachytic rocks distributed across the study area produce rockfalls in a differential weathering rockfall mode and a toppling rockfall mode. In terms of rockfall weight, trachytic rockfalls were 2-3 times heavier than agglomerate rockfalls. An analysis of rockfall behavior from the simulation indicates that the impact energy on the road exceeded the absorbing energy of a standard rockfall protection fence; however, the rockfall was secured when a ring-net was applied.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제35권1호
• /
• pp.63-76
• /
• 2015

The purpose of this study is to suggest performance levels, a test method, and assessment criteria for the performance assessment to allow standardized tests for rockfall protection systems. The range of rockfall impact energy was determined by using domestic rockfall data and a total of 9 performance levels from 50kJ to 1500kJ were suggested. The performance assessment is implemented by two types of full-scale free-fall impact tests to investigate the serviceability and the maximum capacity as in European and American standards. It was considered to be reasonable that the specimens of rockfall protection systems consist of 3 spans and the concrete block of a polyhedron with 26 faces, similar to spheres, impacts at the center of a center span. Assessment criteria were constructed to investigate whether a rockfall penetrated rockfall protection systems and whether the deformed specimen encroached on the roadway or obstructed the vehicle traffic.

• Journal of the Korean GEO-environmental Society
• /
• 제20권1호
• /
• pp.35-42
• /
• 2019

Various development works inevitably increase cutting slopes due to land use, and many of trails managed by different authorities are being deteriorated by long-term weathering. Collapse of slopes causes unavoidable damage of property and loss of lives because of its uncertainty and difficulty in predicting its occurrence. In order to overcome the unavoidability, America, Japan, and several European nations analyze the kinetic energy and moving distance when rocks of upper slope move along the inclined plane, via field tests and computerized interpretation of the test results. Also, they are making efforts to develop measures with which the kinetic energy of the rocks moving along the slope is absorbed and fails to reach to specific structures. However, domestic researches just focus on fragmentary prediction of rockfall using existing programs, and there have been few approaches to identify interpretation methods appropriate for domestic cases or determination of parameters. In this context, we in this study defined rockfall types and affecting factors and analyzed effects of parameters using a general-purpose rockfall simulation program to understand principles of rockfall and to estimate effects of various parameters.