• 터널과지하공간
• /
• 제6권4호
• /
• pp.306-315
• /
• 1996

This paper presents an application of the TDR(Time Domain Reflectometry) to the monitoring of the deformation of rock mass with grouted coaxial cables through laboratory tests. The grouted cable can easily deform together with the rock mass movements, and the deformed cable loses its original capacitance and the reflected waveform produced along the deformed cable consequently represents a change of voltage pulse. Therefore, it is possible to monitor the deformation of rock mass by measuring the changes in these reflection signatures. Shear test of the cemented mortar containing a specimen of coaxial cable showed that the shear deformation correlated linearly with the reflection coefficient, so the TDR was effective to monitor the displacement of the rock mass. Bending test were carried out in order to determine the influence of the crooked cables on the monitoring of rock mass movements. Controlled cirmping and shearing test upon a cable of 50 m long, 12.7 mm diameter showed not only the fact that the reflection amplitudes decreased as the cable length increased but also the proper crimping depth, width and interval between two adjacent crimps. Two coaxial cables-one 100 m long and other 175m long-were installed and grouted into the separate boreholes drilled in a sedimentary formation. The behavior of the cable was monitored with metallic TDR cable tester to measure rock mass deformation based on the interpretative techniques developed through laboratory tests.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1466-1472
• /
• 2010

In order to construct extremely large scale of sea dike like Saemanguem dike, extremely large amount of mass of rock are needed. In this case, it is general methods to estimate required amount of rock mass based on characteristics of consolidation settlement and bearing capacity of seabed, because it is impossible to estimate exact amount of rock material based on varied seabed condition.. Even in this general methods, it is very few case to manage rock mass amount by estimation of actual input rock mass but the main point is focused on the final section formation considering of designed section and reserve embankment, so excessive or underestimating result of rock mass would be occurred surely. This general methods is not resonable in the points of economic and stable. In this study, optimum construction management method of rubble mound in the 3rd section construction of Saemanguem sea dike is suggested based on comparing required rock mass estimating from consolidation settlement theory with actual input rock mass. It is found out that the optimum input quantity of rock mass is about $1,900{\sim}2,000m^3$/day.

• 자원환경지질
• /
• 제36권6호
• /
• pp.415-429
• /
• 2003

이 연구는 충북 미원면 일대 옥천대 흑색셰일 분포지의 상부 화전리층과 구룡산층 지역에서 기반암의 종류에 따른 수질과 오염특성의 변화를 규명하려는 목적으로 수행되었다. 배경수질은 상부 화전리층 지역 시료에서는 주로 (Ca, Mg)-$HCO_3$ 유형이, 구룡산층 지역 시료에서는 $SO_4$의 상대적인 부화로 인하여, 주로 (Ca, Mg)-$SO_4$, (Ca, Mg)-$HCO_3$ 유형이 나타났다. 지하수 시료의 경우, 상부 화전리층 시료에서는 탄산염 및 규산염 광물의 풍화가, 구룡산층 시료에서는 규산염 광물의 풍화가 주를 이루고 있다. 하천수 시료의 경우도 대부분 물-암석 반응의 영향을 받고 있는 것으로 나타났다 군집분석의 결과, 지하수 시료는 크게 3그룹으로, 하천수 시료는 크게 4그룹으로 분류된다. 요인분석의 결과, 물 시료내의 각각의 화학원소의 함량은 주로 자연적인 풍화의 요인과 일부 인위적인 오염의 영향을 받고 있는 것으로 나타났다. 변형된 오염지수(M.R.I.)를 사용하여 연구지역의 수질오염을 살펴본 결과 -0.08∼0.18 사이로 나타나며, 주로 구룡산층 채석장 지역 시료에서 0이상을 나타내었다. 이 연구에서 도입된 변형된 오염지수는 앞으로 수질 오염 예측 및 관리자를 위한 유용한 도구로 사용될 수 있을 것이다.

• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.323-335
• /
• 2021

This paper aims to estimate the range of the excavation damaged zone (EDZ) formation caused by the tunnel boring machine (TBM) advancement through dynamic three-dimensional large deformation finite element analysis. Large deformation analysis based on Coupled Eulerian-Lagrangian (CEL) analysis is used to accurately simulate the behavior during TBM excavation. The analysis model is verified based on numerous test results reported in the literature. The range of the formed EDZ will be suggested as a boundary under various conditions - different tunnel diameter, tunnel depth, and rock type. Moreover, evaluation of the integrity of the tunnel structure during excavation has been carried out. Based on the numerical results, the apparent boundary of the EDZ is shown to within the range of 0.7D (D: tunnel diameter) around the excavation surface. Through series of numerical computation, it is clear that for the rock of with higher rock mass rating (RMR) grade (close to 1st grade), the EDZ around the tunnel tends to increase. The size of the EDZ is found to be direct proportional to the tunnel diameter, whereas the depth of the tunnel is inversely proportional to the magnitude of the EDZ. However, the relationship between the formation of the EDZ and the stability of the tunnel was not found to be consistent. In case where the TBM excavation is carried out in hard rock or rock under high confinement (excavation under greater depth), large range of the EDZ may be formed, but less strain occurs along the excavation surface during excavation and is found to be more stable.

• Geomechanics and Engineering
• /
• 제31권3호
• /
• pp.249-263
• /
• 2022

The specially-shaped Polycrystalline Diamond Compact (PDC) cutter is widely used in drill bit design due to its advantages of high rock cutting efficiency, strong impact resistance and long service life in hard and abrasive formation drilling. A detailed understanding of rock cutting behavior of worn specially-shaped PDC cutter is essential to improve the drilling efficiency and decrease the drilling costs. In this paper, the theoretical models of two new principles (loading performance (LP) and cutting performance (CP)) are derived for evaluating the cutting process of worn specially-shaped cutter, the theoretical models consider the factors, such as cutter geometry, aggressiveness, stress state, working life, and rock cutting efficiency. Besides, the numerical model of heterogeneous granite is developed using finite element method combined with Voronoi tessellation, the LP and CP of 12 kinds of worn specially-shaped PDC (SPDC) cutters are analyzed. The results found that the mechanical specific energy (MSE) of worn cutters first increase and then decrease with increasing the cutting depth, and the MSE increase with the increase of back rake angle except for Conical cutter and Wedge-shaped cutter. From the perspective of CP, the worn PDC cutters are more suitable for the smaller cutting depths, and the back rake angle has little effect on the CP of the specially-shaped worn PDC cutters. Conical cutter, Saddle-shaped cutter and Ellipse-shaped cutter have the highest CP value, while Rhombus-shaped cutter, Convex cutter and Wedge-shaped cutter have the lowest value in selecting cutters. This research leads to an enhanced understanding of rock-breaking mechanisms of worn SPDC cutters, and provides the basis to select of specially-shaped PDC cutters for the specific target formation.

• 터널과지하공간
• /
• 제26권6호
• /
• pp.475-483
• /
• 2016

지하공동 굴착현장에서 관찰되는 절리분포 양상에 대한 자료를 기반으로 굴착과정에서 형성될 수 있는 사면체 블록의 형상, 규모 및 붕락 가능성을 절리 영속성을 고려하여 예측하는 수치해석 기법을 개발하였다. 절리 영속성 분석결과를 이용하여 절리면의 확장성에 따른 개착면에서의 표출정도 및 블록형성 가능성 해석을 수행하는 기능을 고안하여 기존에 개발된 결정론적 3차원 블록해석모델에 접목시켰다. 개선된 수치해석모델의 신뢰성을 고찰하기 위하여 실제 블록 붕락이 발생된 굴착현장에 대한 해석을 수행하였다. 조사된 절리분포 양상에 의거하여 대표 방향성을 설정하고 잠재적 블록 형성을 분석하여 붕락된 블록 형상에 부합된 해석 결과를 도출하였으며, 이에 근거하여 굴착과정에서의 붕락 진행 미캐니즘을 블록형상을 고려하여 고찰하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2011년도 학술대회 및 정기총회
• /
• pp.183-186
• /
• 2011

• 대한지리학회:학술대회논문집
• /
• 대한지리학회 2004년도 추계학술대회
• /
• pp.43-43
• /
• 2004

• 자원환경지질
• /
• 제31권4호
• /
• pp.349-360
• /
• 1998

The alkali granite occurred as small stock and dyke is distributed in the Kyeomyeongsan Formation in the vicinity of the Chungju city. Geochemical characteristics in major and trace element of alkali granite in the Kyeomyeongsan Formation indicate that the alkali granites are peralkaline and have similar geochemical features to the A-type alkali granite. The rock enriched in HFSE such as Zr, Nb, Y, REE etc. According to the discrimination diagram the alkali granites mostly belong to the within-plate granite field, and to the $A_1$ group of A-type granite. This suggests that they might be emplaced in a extentional rift environment. The alkali granites are characterized by remarkably high total REE content, and enriched, relatively flat to somewhat HREE-depleted patterns with large negative Eu anomaly. The Sm-Nd age of the alkali granite is $338{\pm}30Ma$ with ${\varepsilon}_{Nd(t)}$ beings -7.3 to -8.5. On the basis of the geochemical studies the source magma was derived from a enriched mantle-like source and had a few or clearly interaction with sialic continental crust. In conclusion, the alkali granitic rock of the Kyeomyeongsan Formation might be formed from the high F peralkaline magma that was emplaced in continental rift environment, and generated at the early Carboniferous.

• 방사성폐기물학회지
• /
• 제20권4호
• /
• pp.455-468
• /
• 2022

Colloid Formation and Migration (CFM) project is being carried out within the Grimsel Test Site (GTS) Phase Ⅵ. Since 2008, the Korea Atomic Energy Research Institute (KAERI) has joined CFM to investigate the behavior of colloid-facilitated radionuclide transport in a generic Underground Research Laboratory (URL). The CFM project includes a long-term in-situ test (LIT) and an in-rock bentonite erosion test (i-BET) to assess the in-situ colloid-facilitated radionuclide transport through the bentonite erosion in the natural flow field. In the LIT experiment, radionuclide-containing compacted bentonite was equipped with a triple-packer system and then positioned at the borehole in the shear zone. It was observed that colloid transport was limited owing to the low swelling pressure and low hydraulic conductivity. Therefore, a postmortem analysis is being conducted to estimate the partial migration and diffusion of radionuclides. The i-BET experiment, that focuses more on bentonite erosion, was newly designed to assess colloid formation in another flow field. The i-BET experiment started with the placement of compacted bentonite rings in the double-packer system, and the hydraulic parameters and bentonite erosion have been monitored since December 2018.