• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1161-1166
• /
• 2007

This paper proposes the Elastic Force application on the obstacle avoidance of the Silvermate Robot. The method deals with the problem associated with the Silvermate robot driving to a goal configuration as avoiding obstacles. The initial trajectory of a robot is determined by a motion planner, and the trajectory modification is accomplished by adjusting the control points. The control points are obtained based on the elastic force approach. Consequently the trajectory of a robot is incrementally modified to maintain a smooth and adaptive trajectory in an environment with obstacles. The suggested algorithm drivers the robot to obstacle avoid in real-time. Finally, the simulation studies are carried out to illustrate the effectiveness of the proposed approach

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.244-248
• /
• 1996

Nowadays, most shop floors using industrial robots have many problems such as constructing robot workcell, generating robot arm moving trajectory, etc.. In the case of programming robot-arms for a specific task, shop operator commonly use the teach pendant to record the target position and determine the moving trajectory. However, such a teaching process may result in an inefficient trajectory in the sense of moving distance and joint angle fluctuation. Moreover, shop operators who have little knowledge about robot programming process need a lot of learning time and cost. The purpose of this paper is to propose a user friendly robot programming method to program robot-arms easily and efficiently for shop operator so that the programming time is reduced and a short and stable trajectory is obtained.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.146-149
• /
• 2002

This paper presents collision avoidance for mobile robots equipped with synchro-drive using curvature trajectory by the obstacle type. he new real-time obstacle avoidance method presents how to create a curvature trajectory in which dynamics of a mobile robot is considered we controlled translation and rotational velocity of the mobile robot. Using these two speeds with curvature trajectory, the mobile robot navigates to target point without collision. We consider that the robot going to curvature trajectory by obstacle size towards a goal location. The collision avoidance has been implemented and tested using pioneer2-dxe mobile robot.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_1
• /
• pp.753-758
• /
• 2024

Trajectory tracking of the AMR robot is one research for the AMR robot navigation. For the control system of the Autonomous mobile robot(AMR) being in non-honolomic system and the complex relations among the control parameters, it is d ifficult to solve the problem based on traditional mathematics model. In this paper, we presents a simple and effective way of implementing an adaptive tracking controller based on the PID for AMR robot trajectory tracking. The method uses a non-linear model of AMR robot kinematics and thus allows an accurate prediction of the future trajectories. The proposed controller has a parallel structure that consists of PID controller with a fixed gain. The control law is constructed on the basis of Lyapunov stability theory. Computer simulation for a differentially driven non-holonomic AMR robot is carried out in the velocity and orientation tracking control of the non-holonomic AMR. The simulation results of wheel type AMR robot platform show that the proposed controller is more robust than the conventional back-stepping controller to show the effectiveness of the proposed algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.105-114
• /
• 1999

By using the conceptual impedance and the elasticity of a serial chain of spring-damper system, a real-time collision-free trajectory generation algorithm is proposed. The reference points on a trajectory connected by the spring-damper system have a mechanism for self-Position adjustment to avoid a collision by the impedance, and the local adjustment of each reference point is propagated through the elasticity to a real robot at the end of the spring-damper system. As a result, the overall trajectory consisting of the reference points becomes free of collision with environmental obstacles and efficient having the shortest distance as possible. In this process, the reference points connected by the spring-damper system take role of virtual robot as global guidance for a real robot, and a cooperative optimization is carried out by the system of virtual robots. A control algorithm is proposed to implement the impedance for a car-like mobile robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.10
• /
• pp.890-897
• /
• 2002

This paper deals with the reduction of trajectory tracking error by changing the initial postures of a biped robot. Gait of a biped robot depends on the constraints of mechanical kinematics and the initial states including the posture. Also the dynamic walking stability in a biped robot system is analyzed by zero moment point(ZMP) among the stabilization indices. Path trajectory, in which knee joint is bent forward like human's cases, is applied to most cases considered with above conditions. A new initial posture, which is similar to bird's gait, is proposed to decrease trajectory tracking error and it is verified through real experimental results.

• Journal of Multimedia Information System
• /
• v.8 no.2
• /
• pp.121-130
• /
• 2021

Foot bionic robot could be supported and towed through a series of discrete footholds and be adapted to rugged terrain through attitude adjustment. The vibration isolation of the robot could decouple the fuselage from foot-end trajectories, thus, the robot walked smoothly even if in a significant terrain. The gait programming and foot end trajectory algorithm were simulated. The quadruped robot of parallel five linkages with eight degrees of freedom were tested. The kinematics model of the robot was established by setting the corresponding coordinate system. The forward and inverse kinematics of both supporting and swinging legs were analyzed, and the angle function of single leg driving joint was obtained. The trajectory planning of both supporting and swinging phases was carried out, based on the control strategy of compound cycloid foot-end trajectory planning algorithm with zero impact. The single leg was simulated in Matlab with the established kinematic model. Finally, the walking mode of the robot was studied according to bionics principles. The diagonal gait was simulated and verified through the foot-end trajectory and the kinematics.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.9
• /
• pp.845-853
• /
• 2012

We propose time-optimal cornering motion trajectory planning and control algorithms for differential wheeled mobile robot with motor actuating voltage constraint, under piecewise constant control input condition. For time-optimal cornering trajectory generation, 1) we considered mobile robot's dynamics including actuator motors, 2) divided the cornering trajectory into one liner section, followed by two cornering section with angular acceleration and deceleration, and finally one liner section, and 3) formulated an efficient trajectory generation algorithm satisfying the bang-bang control principle. Also we proposed an efficient trajectory control algorithm and implemented with an X-bot to prove the performance.

• The Journal of Korea Robotics Society
• /
• v.4 no.1
• /
• pp.17-24
• /
• 2009

This work deals with an intuitive method for a planar biped to walk, which is named Relative Trajectory Control (RTC) method. A key feature of the proposed RTC method is that feet of the robot are controlled to track a given trajectory, which is specially designed relative to the base body of the robot. The trajectory of feet is presumed from analysis of the walking motion of a human being. A simple method to maintain a stable posture while the robot is walking is also introduced in RTC method. In this work, the biped is modeled as a free-floating robot, of which dynamic model is obtained in the Cartesian space. Using the obtained dynamic model, the robot is controlled by a model-based feedback control scheme. The author shows a preliminary experimental result to verify that the biped robot with RTC method can walk on the even or uneven surfaces.

• Journal of Mechanical Science and Technology
• /
• v.20 no.8
• /
• pp.1159-1168
• /
• 2006

In this paper, a new revolute mobile robot arm with five degree of freedom (d.o.f) was developed for autonomous moving robots. As a control system for the robot arm, a distributed control system composed of the main controller and five motor controllers for arm joints was developed. The main controller and the motor controllers w ε re developed using the ARM microprocessor and the TMS320c2407 microprocessor, respectively. A new trajectory tracking algorithm for the motor controllers was devised employing pre-generated off-line trajectory data. Also, a 3-D simulator based on the openGL software to simulate the motion of the robot arm was developed. To validate the performance of the robot system, experiments to track a specified trajectory were performed.