• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.19-22
• /
• 2003

This paper proposes an algorithm for navigation of an autonomous mobile robot with vision sensor. For obstacle avoidance, we used a curvature trajectory method. Using this method, translational and rotational speeds are controlled independently and the mobile robot traces a smooth curvature trajectory that consists of circle trajectories to a target point. While trying to avoid obstacles, the robot fan be goal-directed using curvature trajectory.

• 로봇학회논문지
• /
• 제4권1호
• /
• pp.43-48
• /
• 2009

Generally, underwater vehicle type of propeller shows low efficiency about 50%-55%. However, the efficiency of swimming mechanism of a fish is 60%-70%, more efficient about 20% than screw propellers. Recently, research of underwater vehicle type of fish increase due to its good efficiency and is regarded as a typical bio-mimical robot. In this research, a new algorithm and mechanism that show low energy consumption imitating swimming mechanism of fish proposed increasing speed and running time in field trial.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.543-547
• /
• 2005

In this paper, we designed a intelligent autonomous driving robot by using Fuzzy algorithm. The object of designed robot is recognition of obstacle, avoidance of obstacle and safe arrival. We append a suspension system to auxiliary wheel for improvement in stability and movement. The designed robot can arrive at destination where is wanted to go by the old and the weak and the handicapped at indoor hospital and building.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.29-32
• /
• 2002

In this paper the wheeled mobile robot is studied. The kinematic and dynamic modeling of the robot is presented via LPD(Linear Parameter Dependent) framework. A path-planning algorithm which is optimized in the sense of robot mobility and distance is presented. And by using PI controller we show that the presented algorithm and model is work very well in the computer simulation and experiment.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.25-31
• /
• 1995

In this paper, a direct drive scalar robot manipulator is constructed and its mechanical machanism for operation is explained. Also, a motion controller board for the direct drive robot manipulator was developed where the IBM 486 computer is the main controller. For the developed direct drive robot, a force/motion control algorithm based on an active compliance scheme is developed. A preliminary experiment using the developed direct drive for a peg-in-hole job was done by implementing the control algorithm.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.971-980
• /
• 2010

이 논문은 모바일 로봇이 고정 장애물 또는 움직이는 장애물이 존재하는 환경에서 장애물을 회피하며 운행될 수 있는 제어 알고리즘을 연구하였다. 이 제어 알고리즘은 $D^*$ 알고리즘과, 충돌 위험도 퍼지로직, 이동로봇의 행동결정 퍼지로직을 사용하여 전역경로계획과 지역경로계획을 수행한다. $D^*$ 알고리즘에는 로봇이 이동하는 2 차원 공간을 정방형 격자 분활하여 적용한다. 이 알고리즘은 파이썬 프로그래밍 언어와 이동로봇의 운동방정식을 사용한 시뮬레이션을 통해 검증하였다. 시뮬레이션 결과를 통해 알고리즘을 적용하여 로봇이 이동하는 장애물을 피하거나 모르는 고정 장애물을 피하면서 원하는 위치로 이동하는 것을 볼 수 있다.

• 제어로봇시스템학회논문지
• /
• 제3권2호
• /
• pp.169-178
• /
• 1997

This paper presents a new solution approach to moving obstacle avoidance problem of a robot. A new concept, avoidability measure(AVM) is defined to describe the state of a pair of a robot and an obstacle regarding the collision between them. As an AVM, virtual distance function(VDF) is derived as a function of three state variables: the distance from the obstacle to the robot, outward speed of the obstacle relative to the robot, and outward speed of the robot relative to the obstacle. By keeping the virtual distance above some positive limit value, the robot avoids the obstacle. In terms of the VDF, an artificial potential is constructed to repel the robot away from the obstacle and to attract the robot toward a goal location. At every sampling time, the artificial potential field is updated and the force driving the robot is derived from the gradient of the artificial potential field. The suggested algorithm drives the robot to avoid a moving obstacle in real time. Since the algorithm considers the mobility of the obstacle and robot as well as the distance, it is effective for moving obstacle avoidance. Some simulation studies show the effectiveness of the proposed approach.

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.716-722
• /
• 2016

Coordinate estimation is an essential function for autonomous navigation of a mobile robot. The optical mouse sensor is convenient and cost-effective for the coordinate estimation problem. It is possible to overcome the position estimation error caused by the slip and the model mismatch of robot's motion equation using the optical mouse sensor. One of the simple methods for the position estimation using the optical mouse sensor is integration of the velocity data from the sensor with time. However, the unavoidable noise in the sensor data may deteriorate the position estimation in case of the simple integration method. In general, a mobile robot has ready-to-use motion information from the encoder sensors of driving motors. By combining the velocity data from the optical mouse sensor and the motion information of a mobile robot, it is possible to improve the coordinate estimation performance. In this paper, a coordinate estimation algorithm for an autonomous mobile robot is presented based on the well-known Kalman filter that is useful to combine the different types of sensors. Computer simulation results show the performance of the proposed localization algorithm for several types of trajectories in comparison with the simple integration method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.620-622
• /
• 2004

Mobility of an indoor wheeled robot is affected by adhesion force that is related to various floor conditions. When the adhesion force between driving wheels and the floor decreases suddenly, the robot has a slip state. In order to overcome this slip problem, optimal slip velocity must be decided for stable movement of wheeled robot. First of all, this paper shows that conventional PI control can not be applied to a wheeled robot of the light weigh. Secondly, reposed fuzzy logic applied by the Takagi-Sugeno model for the configuration of fuzzy sets. For the design of Takaki-Sugeno model and fuzzy rule, proposed algorithm uses FCM(Fuzzy c-mean clustering method) algorithm. In additionally, this algorithm controls recovered driving torque for the restrain the re-slip. The proposed fuzzy logic controller(FLC) is pretty useful with prevention of the slip phenomena through that compare fuzzy with PI control for the controller performance in the re-adhesion control strategy. These procedures are implemented using a Pioneer 2-DXE wheeled robot parameter.

• 전자공학회논문지SC
• /
• 제37권2호
• /
• pp.16-28
• /
• 2000

In this paper, we propose a navigation algorithm for a mobile robot, which is intelligently searching the goal location in unknown dynamic environments using an ultrasonic sensor. Instead of using "sensor fusion"method which generates the trajectory of a robot based upon the environment model and sensory data, "command fusion"method is used to govern the robot motions. The major factors for robot navigation are represented as a cost function. Using the data of the robot states and the environment, the weight value of each factor is determined for an optimal trajectory in dynamic environments. For the evaluation of the proposed algorithm, we peformed simulations in PC as well as real experiments with ZIRO. The results show that the proposed algorithm is apt to identify obstacles in unknown environments to guide the robot to the goal location safely.