• Journal of Drive and Control
• /
• v.19 no.3
• /
• pp.47-52
• /
• 2022

The C-ITS (Cooperative-intelligent Transport System) is a driver assistance system that prevents car accidents and enhances traffic conditions, via sharing traffic information between vehicles and roadway infrastructures. A CLAS (changing lane assistance system) for unprotected left-turn, is a C-ITS that assists a driver with safely changing lanes. This system addresses a driver's critical gap, that enables the system to express a driver's uncertainty. A driver's critical gap is a time that can be used in a threshold, to change a lane or not. Unfortunately, a driver's critical gap is difficult to use in a CLAS directly. This paper addresses a driver's critical gap, and how it can be applied in a CLAS for an unprotected left-turn.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.151-162
• /
• 2012

It is not surprising to hear news about irresistible natural disasters all over the world due to climate change. Korean Government has focused on developing a variety of green technologies to reduce green house gasses, in particular, carbon dioxide. This study suggested 18 technology divisions for achieving green highway technology development in six different sub-sectors considering life-cycle of roadway and surveyed 29 highway and/or transportation professionals of three institutes using AHP(Analytical Hierarchy Process) analysis to construct "Green Highway"and realize carbon emission reductions and energy use efficiency in a road sector in Korea. Expert Choice Software was used to rank 18 technology divisions weighted by two-level choices. Transport Operating Infrastructure Improvement, Roadway Policy Implementation, Green Transportation(such as Pedestrian and Bicycle) were highly ranked by respondents according to results of the AHP modeling. Among the 18 divisions, technology policy for supporting R&D investments from development to commercialization was ranked as the most significant one to be focused. Green Transportation Facility Design/Construction/Operation and Eco-Friendly Roadway Plan were followed as expected since professionals have thought that the planning/design step of the life-cycle is a starting point to reduce carbon dioxide from roads more and more. Additionally, comparing the results with the Government investment trend 2006-2011 for the roads, it can be interpreted that the Government should invest to the R&D area more widely than before to promote element and core technology development for Green Highway Construction. Above all, small and mid-sized businesses have to be invested as well as encouraged to undertake green highwayrelated objects to accomplish the divisions which ranked high.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.36-48
• /
• 2008

Variable Message Signs(VMS) is one of the important subsystems of Intelligent Transportation Systems (ITS), which is useful for providing drivers with real-time information on traffic, roadway or weather conditions. In order to maximize the effectiveness of the VMS system, it is required to reflect drivers's preference on designing and operating the system. In this context, this study was conducted to develop strategies to deliver the messages in an efficient manner while many other previous studies focused primarily on the contents of the messages, from drivers's perspectives. Drivers's preference on message expression formats and message display orders were investigated through image analysis in the perspectives of a total of 40 subjects. With respect to message expression formats, drivers preferred Gulim or Dodum in font style, middle arrangement of the letters, pictogram combination as opposed to letters only, blank time less than 0.5 sec, appearing message in animation effect, messages in single phase, non-flashing message. In the matter of message display orders, drivers preferred to obtain link or traffic information in the lust place. Then, they desired to be informed of roadway condition and instructions or recommendations for drivers to cope with unexpected events among various messages for traffic condition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.121-132
• /
• 2008

Recently, there is a growing interest in promoting safe and convenient roadway and traffic conditions for elderly drivers. This paper analyzed the driving characteristics, self recognition, and any inconvenience of elderly drivers over age 65 through an extensive survey, and drew some action plans to improve the driving conditions for elderly drivers. Survey results showed that the major trip purposes of the elderly driver were found to be commuting(50%) and business(33%), and this pattern was similar to the general drivers. The elderly drivers are interested in "safety", but "brand recognition" was the more important factor for the general drivers in the process of vehicle selection. The elderly drivers had no technical skill difference in driving as compared to the general drivers, but they fully recognized the physical deterioration such as reaction time and sight distance. In addition, the elderly drivers had a tendency to feel psychological contraction as to high workload driving conditions, thus it was necessary to make safe driving conditions by improving the design elements of traffic control devices on the roadways including visibility.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.5
• /
• pp.656-667
• /
• 2013

The non-exhaust coarse, fine, and ultrafine particles were characterized by on-road driving measurements using a mobile sampling system. The on-road driving measurements under constant speed driving revealed that mass concentrations of roadway particles (RWPs) were distributed mainly in a size range of 2~3 ${\mu}m$ and slightly increased with increasing vehicle speed. Under braking conditions, the mode diameters of the particles were generally similar with those obtained under constant speed conditions. However, the PM concentrations emitted during braking condition were significantly higher than those produced under normal driving conditions. Higher number concentrations of ultrafine particles smaller than 70 nm were observed during braking conditions, and the number concentration of particles sampled 90 mm above the pavement was 6 times higher than that obtained 40 mm above the pavement. Under cornering conditions, the number concentrations of RWPs sampled 40 mm above the pavement surface were higher than those sampled 90 mm above the pavement. This might be explained that a nucleation burst of a lot of vapor evaporated from the interaction between the tire and the road pavement under braking conditions continuously occurred by cooling during the transport to the sampling height 90 mm, while, for the case of cornering situations, the ultrafine particle formation was completed before the transport to the sampling height of 40 mm.

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.43-55
• /
• 2012

Bicycle is an environment-friendly transport mode contributing to a more sustainable transportation systems. To innovatively increase the use of bicycle as a significant transport mode, bicycle-friendly roadway environment should be provided. This study proposes a method to evaluate cycling environment based on the analysis of data collected from an specially equipped probe bicycle. The inertial measurement unit(IMU) consisting of a gyro sensor, accelerometer, and a global positioning systems(GPS) receiver was installed on the probe bicycle. Cycling stability index(CSI) and bicycle speed data were used as inputs of the proposed evaluation framework adopting the Fault Tree Analysis, which is a well-known technique for the risk analysis. The outcomes of this study will serve as an intelligent assesment tool for cycling environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.83-91
• /
• 2017

The Manual on Uniform Traffic Control Devices advises that, "Signs should be placed on the right side of the roadway where they are easily recognized and understood by road users." Guidance is provided on the spacing and prioritization of signs, and in some conditions, additional steps may be needed to ensure that signs are conspicuous. This study proposes a design methodology using ergonomics concepts applied to traffic sign and street name signs. Initially, a literature revision on cognitive ergonomics is performed. Several design methodologies are analyzed and the aspects to be considered in traffic signs are selected.. In this study, problems of traffic signs in Korea were identified through the comparative analysis of domestic and foreign traffic signs and a prototype of ergonomic traffic sign was developed based on the analysis results. And the driver's views on the developed traffic sign were investigated. In addition, based on the results of this study, this study is to provide the necessary foundation for improving traffic signs in order to help the various age groups of drivers to reach their destinations without difficulties when they drive.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.88-99
• /
• 2018

In Korea, there is no clear regulation about right of way (ROW) for personal mobility device (PMD). So it is now illegal to use PMD in a space other than roadway. PMD has an advantage of being able to travel a long distance to move on foot with a relatively high speed, so it seems to spread widely in the near future. In this study, we'd like to establish the permission criteria for PMD in sidewalk, with the performance factors of the PMD. We review the cases of ROW of PMD in some foreign countries, and the performance standards for similar products that are currently allowed to use in the sidewalk or used in the sidewalk. Based on the maintenance standards for the sidewalk, we establish criteria to select the PMD moving means that can be used in sidewalk.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.32-38
• /
• 2018

Studies on classification of national roads have been continued, but there is little research on the classification of urban arterial roads. Due to the increase of traffic volume, urban arterial roads do not perform well as main roads. In this paper, the function of urban arterial road was established by using cluster analysis using traffic characteristics. Traffic characteristics such as traffic volume, weekend coefficient and speed coefficient were used to establish the functions of 55 main arterial roads in Seoul. The results of this paper are compared with those of the method using AADT. The method using AADT classifies the characteristics according to the traffic volume of the whole lane. In this paper, however, the results are derived using the traffic volume per lane reflecting the actual traffic volume. In addition, the functional classification of the arterial roads in Seoul was compared with the results of this paper to verify that the traffic characteristics were reflected. As a result, the method presented in this paper is more effective in showing traffic characteristics than the current highway functional classification method, and the functional classification system will be helpful for road extension and planning design.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.53-62
• /
• 2003

This paper demonstrates the in-vehicle dilemma zone warning system (DZWS) project developed as a part of the Driver Advisory and Collision Warning System in Automated Vehicle and Highway System (AVHS). The DZWS project, one of the Korea national ITS projects in 2000 develops the in-vehicle warning device to support drivers' decision making on whether to stop or to proceed to clear the intersection prior to the onset of yellow signal for avoiding the high risk of collision at signalized intersections through the dedicated short range communication (DSRC). This paper explores the design of optimal communication systems between roadway and vehicles, the operational and functional concepts of dilemma zone warning system based on appropriate approach speeds, and the system integration for field test at two sites of signalized intersections. Findings from the system integration indicated that the system would be implemented in eliminating the dilemma zone relative to approach speeds and in reducing red light violations and intersection collisions through the in-vehicle warning device at signalized intersection.