• 제목/요약/키워드: road vehicles

검색결과 1,357건 처리시간 0.03초

타이어소음 현황 특성 (Tyre/road Noise Status and Characteristics)

  • 강대준;정일록;장성기;서충열;박준철
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.711-718
    • /
    • 2001
  • The tyre/road noise becomes aggravated due to the rapid increase of motor vehicles. It has a great effect on the dwelling environment. Therefore we investigate the characteristics and sources of the tyre/road noise through grasping the status of the tyre/road noise. Traffic noise results from the collective contribution of the noise produced by individual motor vehicles. The tyre/road noise varies enormously depending upon its type and mode of operation.

  • PDF

도로기하구조 조건에 따른 차량별 온실가스 배출량 산정사례 적용연구 - 맑은 날씨를 기준으로 - (Application Methodology of Greenhouse Gases Emission Table for Various Types of Roads and Vehicles)

  • 이종학;최재성;노관섭;허혜정
    • 한국도로학회논문집
    • /
    • 제18권1호
    • /
    • pp.23-31
    • /
    • 2016
  • PURPOSES : This study aimed to offer a greenhouse gases table to assist a road designer in calculating the greenhouse gases for a road environment when making a decision about an alternative road. METHODS : This study developed an operation mode table of greenhouse gases using the MOVES program. Similar factors for Korean vehicles and fuels are reflected in the MOVES program, which was made in the USA. Finally, a paired t-test was conducted to calculate the site data and MOVES data. Through these studies, a methodology was suggested for calculating carbon emissions based on various types of roads alignments. RESULTS : The site results for a passenger truck on the road were statistically significant when the vehicle speed was above 65 km/h. However, a future study will consider factors for various road alignments and vehicles. CONCLUSIONS : This study will contribute to the theoretical basis for reducing carbon emissions from roads by helping road designers make decisions about road alternatives in terms of the road environment.

차량 애드혹 네트워크 기반 V2V와 V2I 통신을 사용한 시내 도로에서의 교통 체증 관리 (Traffic Congestion Management on Urban Roads using Vehicular Ad-hoc Network-based V2V and V2I Communications)

  • 류민우;차시호
    • 디지털산업정보학회논문지
    • /
    • 제18권2호
    • /
    • pp.9-16
    • /
    • 2022
  • The nodes constituting the vehicle ad hoc network (VANET) are vehicles moving along the road and road side units (RSUs) installed around the road. The vehicle ad hoc network is used to collect the status, speed, and location information of vehicles driving on the road, and to communicate with vehicles, vehicles, and RSUs. Today, as the number of vehicles continues to increase, urban roads are suffering from traffic jams, which cause various problems such as time, fuel, and the environment. In this paper, we propose a method to solve traffic congestion problems on urban roads and demonstrate that the method can be applied to solve traffic congestion problems through performance evaluation using two typical protocols of vehicle ad hoc networks, AODV and GPSR. The performance evaluation used ns-2 simulator, and the average number of traffic jams and the waiting time due to the average traffic congestion were measured. Through this, we demonstrate that the vehicle ad hoc-based traffic congestion management technique proposed in this paper can be applied to urban roads in smart cities.

KANO 모델을 활용한 V2H 커뮤니케이션 기술의 우선순위 분석 (Exploring the Key Priority of V2H Communication Technology Using the KANO Model)

  • 이상화;강수희;장정아
    • 자동차안전학회지
    • /
    • 제14권4호
    • /
    • pp.91-99
    • /
    • 2022
  • In Korea, various studies on autonomous vehicles are being conducted with the aim of commercializing the fully autonomous driving (Lv.4) on major roads in 2027. Currently, the communication between non-autonomous vehicles and road users is made with gestures, eye contact, and verbal signals. In the case of autonomous vehicles in the future, autonomous vehicles should communicate instead of drivers. Recently, V2H communication technology (communication technology between autonomous vehicles and road users) is being developed. This study shows technology priorities using the KANO model in caution (warning) and traffic (concession) situations. As a result, a total of six attractive quality technologies were analyzed: technology to provide dark warning information in a display graphic; technology to provide dark warning information in a projection graphic; technology to provide light concession information in a display graphic; technology to provide dark concession information in a display graphic. In the future, it will investigate the preference of users in providing V2H information by road situation. It will be used as a V2H design priority.

Changes in air pollutant emissions from road vehicles due to autonomous driving technology: A conceptual modeling approach

  • Hwang, Ha;Song, Chang-Keun
    • Environmental Engineering Research
    • /
    • 제25권3호
    • /
    • pp.366-373
    • /
    • 2020
  • The autonomous vehicles (AVs) could make a positive or negative impact on reducing mobile emissions. This study investigated the changes of mobile emissions that could be caused by large-scale adoption of AVs. The factors of road capacity increase and speed limit increase impacts were simulated using a conceptual modeling approach that combines a hypothetical speed-emission function and a traffic demand model using a virtual transportation network. The simulation results show that road capacity increase impact is significant in decreasing mobile emissions until the market share of AVs is less than 80%. If the road capacity increases by 100%, the mobile emissions will decrease by about 30%. On the other hand, driving speed limit increase impact is significant in increasing mobile emissions, and the environmentally desirable speed limit was found at around 95 km/h. If the speed limit increases to 140 km/h, the mobile emissions will increase by about 25%. This is because some vehicles begin to bypass the congested routes at high speeds as speed limit increases. Based on the simulation results, it is clear that the vehicle platooning technology implemented at reasonable speed limit is one of the AV technologies that are encouraging from the environmental point of view.

도로터널 화재안전기준 기반 항만 지역 도로터널 화재 안전성 분석 (Evaluation of Fire Safety for Road Tunnels in Port Area based on Fire Safety Guidelines)

  • 하예진;전준호
    • 융복합기술연구소 논문집
    • /
    • 제11권1호
    • /
    • pp.25-28
    • /
    • 2021
  • Recently, the fire safety of road tunnels has been important issues in South Korea. However, proper fire safety regulations has not made for road tunnels. Due to geographical challenges in South Korea, road tunnels should be constructed to secure stable traffic flows. In the Guidelines for Installing and Managing Disaster Prevention Facilities of Road Tunnels (NFSC 603), main target vehicles are passenger cars. This guidelines cannot support big fires from larger vehicles such as cargo, oil trucks. In this study, fire safety for a road tunnel in port area was analyzed with fire dynamics theory under cargo truck fire scenario. Sujunsan road tunnel in Busan city was chosen as a target tunnel, which links between Busan port and highways to increase cargo shipping. The results show the limitations of present guidelines (NFSC 603) for road tunnel from large fire situations.

PEMS를 이용한 소형 경유차의 실주행 NOx 배출특성 평가 (Estimation of Real-Driving NOx Emission Characteristics from Light-Duty Diesel Vehicles with PEMS)

  • 박연재;권상일;박준홍;이재영
    • 한국대기환경학회지
    • /
    • 제31권6호
    • /
    • pp.562-572
    • /
    • 2015
  • $NO_x$ emissions from diesel vehicles have been regarded as a main cause of high $NO_2$ concentration in metropolitan area. Recent studies have shown that the on-road $NO_x$ emissions of diesel vehicles are quite higher than the emission limits specified with the pre-defined test method for emission certification. To reduce air pollutants effectively, the discrepancy of emissions in certification and real-driving conditions should be tackled. In this study, the real-driving emissions have been estimated with portable emission measurement system (PEMS). The results of this study have shown that the on-road $NO_x$ emissions from diesel vehicles have been decreased as the introduction of stricter emission regulation, EURO-6, but additional reduction should be still required and robust technologies should be applied to control $NO_x$ in real-driving conditions. RDE-LDV (Real Driving Emission - Light Duty Vehicles) test method being developed in the European Union can represent excessive on-road $NO_x$ emissions of diesel vehicles as applied emission technologies and can be a solution to remove discrepant $NO_x$ emissions between certification and Korean real-driving conditions. Among the $NO_x$ reduction technologies for EURO-6 diesel vehicles, selective catalytic reduction (SCR) system has shown the better performance than lean $NO_x$ trap (LNT) system to control on-road $NO_x$ emissions. Implementing RDE-LDV will require vehicle manufacturers to adopt the more effective $NO_x$ reduction technology in real driving conditions.

완전 자율주행자동차에 대한 도로이용자 수용성 요인 분석 : 운전자 및 보행자를 대상으로 (An Analysis of Road User Acceptance Factors for Fully Autonomous Vehicles : For Drivers and Pedestrians)

  • 정미경;최미선
    • 한국ITS학회 논문지
    • /
    • 제21권5호
    • /
    • pp.117-132
    • /
    • 2022
  • 본 연구는 완전 자율주행자동차(Level 4 이상)에 대한 도로이용자 수용성 영향요인 분석을 목적으로 한다. 조사대상은 완전 자율주행자동차와 도로를 공유하는 일반자동차 운전자와 보행자로 설정하였다. 기술에 대한 신뢰, 호환성, 정책, 인지된 안전성, 인지된 유용성이라는 5가지 수용성 요인을 선정하고, 행동의도에 미치는 영향을 구조방정식 모형(Structural Equation Modeling, SEM)으로 분석하였다. 완전 자율주행자동차 수용에 있어 수용주체에 관계없이 인지된 안전성과 기술에 대한 신뢰가 매우 중요한 것으로 확인되었으며, 정책은 영향력이 없었다. 호환성 및 인지된 유용성은 보행자 보다 운전자에게 특히 영향력 있는 요인이었다. 도로이용자의 수용성 향상을 위해서는 완전 자율주행자동차의 기술적인 완성도 확보가 무엇보다도 중요하다. 완전 자율주행자동차의 안전운전능력에 대한 인증 및 평가가 철저하게 수행되고, 그 결과를 토대로 도로이용자의 인식을 개선할 필요가 있다. 도로이용자 대상 교육 및 홍보를 통해 완전 자율주행자동차를 긍정적으로 인식하게 하고, 완전 자율주행자동차와 도로이용자 간 원활한 상호작용이 가능하도록 지원해야 한다.

SMART Highway 환경에서의 사인크립션 기반 키 교환 프로토콜 (Key Exchange Protocol based on Signcryption in SMART Highway)

  • 김수현;이임영
    • 한국멀티미디어학회논문지
    • /
    • 제16권2호
    • /
    • pp.180-189
    • /
    • 2013
  • SMART Highway 사업은 첨단 IT통신과 자동차 및 도로 기술이 접목된 세계 최고수준의 빠르고 편안한 지능형 녹색도로 실현을 목표로 하고 있다. SMART Highway의 도로-자동차 기반 교통운영의 핵심기술인 VANET(Vehicular Ad-hoc Network)은 다수의 차량들이 무선통신을 이용하여 차량 간 통신 또는 차량과 RSU(Road Side Unit)사이의 통신을 제공하는 차세대 네트워킹 기술이다. 특히, 운전자의 안전에 직접적인 영향을 끼칠 수 있는 V2V 통신의 경우 차량 간의 안전한 통신을 위해 안전한 키 교환이 반드시 고려되어야 한다. 이처럼 빠른 속도로 이동하는 차량 간 안전한 키 교환이 원활이 이루어지기 위해서는 기존의 네트워크에서 사용된 방식은 그대로 적용시키기 어렵다. 따라서 본 논문에서는 다수의 차량 간 통신 시에 보다 효율적이고 안전한 키 교환을 위해 사인크립션을 이용한 차량 간 그룹키 교환기법을 제안한다.

국내 고속도로의 저소음포장 기술 동향 (About Quiet Pavement Technologies in Korean Highway)

  • 문성호;홍승호;조대승;김철환
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.491-495
    • /
    • 2008
  • The effects of vehicles and pavement surface types on noise have been investigated at the Korea Expressway Corporation's Test Road along the southbound side of the Jungbu Inland Expressway, South Korea. The study was conducted in 2005 and 2006 through field measurements at nine surface sections of asphalt concrete and Portland cement concrete pavements using eleven vehicles. For the road noise analysis, the sound power levels (PWLs) of combined noise (e.g., tire/pavement interaction noise and power-train noise together) and tire/pavement interaction noise using various vehicles were calculated based on the novel close proximity (NCPX) and pass-by methods. Then, the characteristics of the PWLs were evaluated according to surface type, vehicle type, and vehicle speed. The results show that the PWLs of vehicles are diversely affected by vehicle speed and the condition of the road surface.

  • PDF