• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.82-88
• /
• 2018

This study investigated the structure of an 8-pole 8-slot linear generator, which acts as an electromagnetic damper by combining the structure of an electromagnetic suspension device capable of generating electrical energy through energy harvesting by absorbing the vibration energy from the road surface while driving. To compare the energy harvesting effect of the electromagnetic suspension according to the actual road surface, a driving road test was simulated for two actual road conditions, an asphalt road surface and unpacked road surface condition, using a civilian combined vehicle model in conjunction with a vehicle simulation program, Carsim and Simulink. As a result, the relative displacements of the suspensions on the asphalt road surface and the unpaved road were 8 mm and 13 mm, respectively. By applying the suspension displacement value derived by modeling the linear generator coupled to the electromagnetic suspension, the simulation was then performed for an analysis time of 0.3s by applying the same analytical conditions using the commercial electromagnetic analysis program, ANSYS MAXWELL, The average power generation on the unpacked roads and asphalt roads was 198.6W and 98.7W respectively, which was 103.7% higher for unpackaged roads. Finally, to compare the sensitivity of the road surface frequency and the suspension input displacement to the power generation output, the sensitivity of the two variables was 1.725 and 1.283, respectively, and the road surface frequency had a 34.5% higher effect on the average power generation.

• Journal of Power System Engineering
• /
• v.10 no.1
• /
• pp.34-40
• /
• 2006

The snow melting system by electric heating wires which is adopted in this study is a part of road facilities to keep surface temperature of the road higher than freezing point of water for melting the snow accumulated on it. The system is designed to increase traffic safety and capacity. The electric heating wires are buried under paved road at a certain depth and operated automatically and manually. Design theory, amount of heating, and installation standard vary according to economic situation, weather condition, and installation place where the system applies. It is tried to figure out that the appropriate range of required heat capacity and installation depth and intervals for solving snowdrifts and freezing problems with the minimum electric power consumption. The most important factors to design the system are calculation of heating capacity depending on weather condition and depth and interval of the electric heating wires depending on air condition respectively. The study were performed under the range of the air temperatures($-2^{\circ}C,\;-5^{\circ}C,\;-8^{\circ}C$), the intervals of the electric heating wires(70mm, 100mm, 125mm), and the installation depths(50mm, 70mm, 100mm). The ready made commercial program package was used to verify the experimental results.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.163-171
• /
• 2015

The aim of this study was to investigate kinematic mechanism of gait different road conditions(dry vs. oil) in order women. For this study, twenty older women and ten young women participated in this research. twelve infrared cameras were used to collect data. It appeared that the gait strategies of older women were slower velocity and higher CoM than young women. Depending on road conditions, gait velocities of dominant muscle older women on dry surface were faster than dominant sense older women, but those of them were inverse on oil surface. The slip displacement of dominant muscle older women was less than young women, but the slip displacement of dominant sense older women was greater than young women. In case of blind during stance phase on oil surface, the rotational motion of the ankle and knee joints were increased. In conclusion, older women were subjected to self-organization theory and phase shift in dynamic theory.

• Smart Structures and Systems
• /
• v.32 no.5
• /
• pp.309-318
• /
• 2023

The appropriate maintenance of highway roads is critical for the safe operation of road networks and conserves maintenance costs. Multiple methods have been developed to investigate the surface of roads for various types of cracks and potholes, among other damage. Like road surface damage, the condition of expansion joints in concrete pavement is important to avoid unexpected hazardous situations. Thus, in this study, a new system is proposed for autonomous expansion joint monitoring using a vision-based system. The system consists of the following three key parts: (1) a camera-mounted vehicle, (2) indication marks on the expansion joints, and (3) a deep learning-based automatic evaluation algorithm. With paired marks indicating the expansion joints in a concrete pavement, they can be automatically detected. An inspection vehicle is equipped with an action camera that acquires images of the expansion joints in the road. You Only Look Once (YOLO) automatically detects the expansion joints with indication marks, which has a performance accuracy of 95%. The width of the detected expansion joint is calculated using an image processing algorithm. Based on the calculated width, the expansion joint is classified into the following two types: normal and dangerous. The obtained results demonstrate that the proposed system is very efficient in terms of speed and accuracy.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.375-381
• /
• 2005

The purpose of this study is to obtain a foundation data for chassis design and road noise reduction of automobiles. Using the combination of the automobile, radial tires and instrumentation equipment, experimental investigation were carried out to examine the characteristics of the structural vibration of tire as the key to obtaining the effective parameters for reducing road noise. From the results of experimental studies it has been confirmed that the existence of important frequency ranges, which were attributable to the suspension and chassis system. The tire, axle and chassis natural frequency of automobile govern the road noise. Results that material property of tire and experimental condition are parameter for shifting of tire natural frequency, which enables a designer of an automobile to foresee the influence of the various design factors on the road noise.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.26-34
• /
• 2008

This study focus on segmentation process that classifies road surfaces into 5 different categories, dry, wet water, icy, and snowy surfaces by analyzing asphalt-paved road images taken in daylight. By using the polarization coefficients, the proportions of horizontally polarized components to vertically polarized components, regions with over 1.3 polarization coefficients are classified as wet surfaces. Except for wet surfaces, the decision process a lies time-frequency analysis to other parts by using the third order wavelet packet transform. In addition, by using the average frequency characteristics of dry and icy surfaces from image templates, decide which is closer to a test image, and finally identify dry and icy surfaces. It is confirmed that the reposed estimation and segmentation of recognition on various images. This can be interpreted as an indication that image-only mad surface condition supervision is probable.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.233-240
• /
• 1997

The study presents the linear dynamic analysis of multi-girder steel bridges under vehicular movement to examine the performance characteristics due to the various structural and loading conditions. The road surface roughness and bridge-vehicle interactions are considered. The road surface profiles for the approaching roadway and bridge decks are generated from power spectral density functions for different road roughness conditions. A new filtering method using the wheel trace is proposed to obtain the more rational bridge-vehicle interactions from the randomly generated road surface. The possible settlement condition between the bridge deck and approaching roadway is also included. The dynamic responses of various bridges designed according to current design practice are examined, in which important structural parameters(such as span length, girder spacing, etc.) are considered systematically. In addition to the basic loading conditions due to a single truck passing on the bridge, the traffic conditions of multi-truck traveling either consecutively on the same lane or side-by-side on the adjacent lanes are also evaluated.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.57-68
• /
• 2018

A system to prevent disasters by collecting and analyzing environmental information such as road surface sedimentation, sinkholes, collapse risk of bridges, temperature and humidity around tram station is continuously monitored by monitoring the condition of road surface when constructing tram which is one of the urban railways. In this paper, we propose a wireless network security management system for tram roads based on LPWA that can recognize risk factors of road surface, bridge and tram station of tram in advance and prevent risk. The proposed system consists of a sensor node that detects the state of the tram road surface, a gateway that collects sensor information, and a safety management system that monitors the safety and environmental conditions of the tram road surface, and applies the low power long distance communication technology. As a result of comparing the proposed system with the LTE system in the field test, it was confirmed that there is no significant difference between the sensor information value and the critical alarm level in the monitoring system.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.75-84
• /
• 2001

The reliable data relating to the condition of road surface is of increasing importance to deliver the road condition to driver and road management authority. This paper describes the development of a new high-speed. automatic, road data collection system, which collects the longitudinal road data with ${\sim}30cm$ interval covering full width of the road at 100km/h speed. The system calculates the international roughness index (IRI) from the collected data and displays the IRI and road profile data on the screen. To develope the system, we implement an optical range finder, advanced distance and motion detectors, and signal processing and display modules. The measurement accuracy of the system at 70km/h operation speed shows ${\pm}0.1m/km$ in the IRI for the standard road. To confirm the performance of the developed system, we also measure the IRI of a deployed highway road and compare the results with a conventional system and human eye measurement results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.1-12
• /
• 2013

Road's accidents caused by Ice, snow, Wet of roads surface conditions and weather conditions situations that are constantly occurring. That is, driver's negligence and safe driving ability of individuals due to lack of awareness, and Road management main agent(the government and the public, etc.) due to road conditions, if there is insufficient information. So Related research needs is a trend that is required. In this study, gather Camera(Stereo camera)'s image data, and analysis polarization coefficients and wavelet transform. And unlike traditional single-dimensional classification algorithms as multi-dimensional analysis by using SVM classification techniques, develop an algorithm to determine road conditions. Four on the road conditions (dry, wet, snow, ice) recognition success rate for the detection and analysis of experiments.