• 한국도로학회:학술대회논문집
• /
• 2008.10a
• /
• pp.513-517
• /
• 2008

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.147-153
• /
• 2017

PURPOSES : This research aims to estimate the occurrence of hydroplaning on roads based on the road alignment types and rainfall intensity in Seoul. METHODS : Three types of data were used for estimation of hydroplaning in this study. The Inner Circulation Road (12.5 km) to the Bukbu Expressway (7.4 km) in Seoul was selected as the test road and data was collected for road information using a probe-vehicle. Precipitation was observed from Automatic Weather System in Seoul. These data were interpolated by applying Inverse Distance Weighted Methodology for hydroplaning estimation. Finally, the water depth information of the roads was observed using an RCM411 device. RESULTS : This study demonstrated that the cross slope with small-angle-tilt or vertical section with large-angle-tilt are the primary factors causing hydroplaning on the roads. The flow velocity on steep slope is high; however, large drainage lengths result in hydroplaning on the roads. CONCLUSIONS : This result can contribute towards the reduction of car accidents on rainy days. Furthermore, information regarding hydroplaning can be delivered to drivers more rapidly and precisely in the future.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.4
• /
• pp.274-278
• /
• 2021

Road structures play an important role in collisions involving vehicles and wildlife. Our study aimed to determine the effect of various types of road structures on the risk associated with roadkill. We surveyed 50 previously identified roadkill hotspots, ranked from one to five according to roadkill density. We collected nine types of road structure data on each hotspot road section. Structures with similar characteristics were grouped together, resulting in five categories, namely, median barrier, high edge barrier, low edge barrier, speed, and visibility. We examined the existence of each road structure category at each hotspot rank. The cumulative link model showed that the absence of bottom blocked median barrier increased the roadkill hotspot rank. Our study concluded that a visual obstacle in the middle of roads by the median barrier decreases wildlife road crossing attempts and roadkill risk. We suggest that future roadkill mitigation plans should be established considering these characteristics.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.197-203
• /
• 2003

Korea Highway Corporation(KHC) began the ambitious KHC Test Road construction project from 1997. It is 7.7km long two-lane highway next to the mainline of Jungbu Inland Expressway. The KHC Test Road construction was completed at the December 2002. It is composed of twenty-five PCC test pavement sections. Section design parameters are (1) concrete slab thickness, (2) base type, (3) base thickness (12, 15, and 18cm), and (4) pavement type. Twenty-five PCC test pavement sections contain 1241 sensors to evaluate the behavior of pavement system under traffic load and environmental change. The behavior of pavement systems will be identified by the observation of sensor measurement and pavement distress survey from test pavement sections. The Test Road research outcome will validate the Korean Pavement Design Guide which is develop by on-going funded research from the Ministry of Construction and Transportation.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.31-35
• /
• 2006

Cement stabilisation is a common method for stabilising recycled road base material and provides a longer pavement life. With cement effect, the increment of stiffness in the stabilised layer would provide better load transfer to the pavement foundation. The recycling method provides an environmentally option as the existing road base materials will not be removed. This paper presents a case study of a trial section along the North-South Expressway in West Malaysia, where the Falling Weight Deflectometer (FWD) was implemented to evaluate the compressive strength and in-situ stiffness of the cement stabilised road base material. The improvement in stiffness of the cement stabilised base layer was monitored, and samples were tested during the trial. FWD was found to be useful for the structural assessment of the cement-stabilised base layer prior to placement of asphalt layers. Results from the FWD were applied to verify the assumed design parameters for the pavement. Using the FWD, an empirical correlation between the deflection and the stiffness modulus of the pavement foundation is proposed.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.186-196
• /
• 2010

It has been well known that traffic accidents occur under combined functional contributions of drivers, vehicles and road facilities, and that evaluation of safety levels for a specific road section or point is generally much complicated. Additionally, most of traffic accidents occur randomly implicating it is necessary to be evaluated in terms of probability theory. Thus, the evaluation model which reflects various characteristics and probabilistic distributions of traffic accidents has been necessary. The present paper provides a reliability based model with variables of probabilistic operating speeds and design speeds together which have been individually explaining associated characteristics in traffic accidents. Consequently, the model made it possible for speed management and road improvement projects to be evaluated in a common index. Application studies were performed in three cases. Through the studies, couples of facts were identified that the model successfully considered the probabilistic operating speeds and design speeds together and that then, the model evaluated road safety alternatives relatively which are complicatedly characterized and differently located.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.9-16
• /
• 2010

Roughness is the most important factor to maintain the road performance, and affects greatly on the design life in Jointed Plain Concrete pavements. Also, the factors the evaluate pavement‘s commonality is the three method such as functionality, safety and structural performance. In evaluating function of road, representative factors is the roughness, which has been used to determine maintenance time as key standard. As research for roughness is absence in pavement design. Applied roughness-model had a low-reliability in Korea. Therefore, it is needed to develop reliable model in road roughness. In this research, uniform specific is applied to distribute them after selecting the concrete pavements. Concrete pavement is divided by sections of 238. Total length of this sections has 281km and account for 16% of total road length in korean concrete pavements for selected sections. Considering the korean roughness-model, the evaluation of roughness is performed for the freezing index, average annual rainfall, condition for the base, the amount of traffic as well as spalling(%), cracking(%), age(year) at the selected section at the selected section. Also, additional sections is selected to evaluate various age which affects on the roughness. As a result of the analysis, it showed that spalling(%), cracking(%), age(year), and the condition of the base affected road roughness. When the correlation with the road roughness was analyzed, the reliable model for road roughness was proposed, and the ratio that can explain road roughness was R2-68.8% and P value-0 which is statistically meaningful.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.95-102
• /
• 2012

This study has been conducted to characterize the relations between the accident rate and the overlap section elements where the horizontal alignment and vertical alignment are overlapped. The researches were performed on Horizontal curve sections of 4-lane highways with 100km/h of design speed and speed limit. Korea Highway Corporation's Geographic Figurative Information System was adopted for geometric organization and Highway Traffic Accident Statistics was used. The results reveal that sections made of a single slope without vertical curve has greater accident rate than those with vertical curve, and that sections with 1 vertical curve are higher in the accident rate than those with over 2 vertical curve. For the sections with 1 vertical curve, SAG sections are higher than CREST sections and for the previous straight section of horizontal curve are higher than curved ones. In particular, when the road surface is wet, the accident rate is closely related with SAG vertical curves or leftward horizontal curved sections. This study will have meanings that it proposes the importance of design of road alignment by taking consideration of 3D synthetic alignment conditions for improvement of the road safety.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.570-580
• /
• 2015

In the study, planning indicator that should be considered in applying traffic calming technique was derived, and it was intended to analyze the importance of indicator that should most considered in planning traffic calming technique through AHP analysis on the basis of it. The result of planning indicator may be summarized by dividing into road section and crossing section. In road section, hump (0.35) for equipment stimulating reduction of speed, hump image/fort (0.31) for visual control equipment, and slalom type road (0.52) for chicane, and bollard (0.47) for blocking passing route are shown to be the most important and come before anything. In crossing section, signal indicator (0.33) for visual control equipment, rumble strip (0.44) for equipment stimulating reduction of speed, zigzag type road (0.65) for chicane, and blocking going straight at crossing (0.45) for blocking passing route are shown to be the most important and come before anything. The result of the study is judged to be used for basic material in applying traffic calming technique and establishing policy hereafter.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.68-79
• /
• 2008

Ground vehicle borne system which is named RoSSAV(Road Safety Survey and Analysis Vehicle) developed in KICT(Korea Institute of Construction Technology) can collect road geometric data. This system therefore is able to evaluate the road safety and analyze road deficient sections using data collected along the roads. The purpose of this study is to extract road geometric data for 3D road modeling in dangerous road section and The system should be able to quickly provide more accurate data. Various sensors(circular laser scanner, GPS, INS, CCD camera and DMI) are installed in moving object and collect road environment data. Finally, We extract 3d road geometry(center, boundary), road facility and slope using integrated multi-sensor data.