• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.139-146
• /
• 2004

Road design should be conformed to the expectancy of drivers. The alignment such as long tangent followed by the sharp horizontal curve should be avoided for the road design consistency. Currently, operating speed profile model is generally used to check the consistency of the successive road alignments. In this model, the hypothesis about the drivers' behaviour on the long tangent followed by the sharp horizontal curve is also included. This study compares the hypothesized drivers' behaviour in the existing operating speed profile model with the actual drivers' behaviour observed at the two lane rural roads. In addition to this, comparison between the acceleration for the vehicles approaching and departing horizontal curves suggested by the foreign research and the value observed at this study was made, From this study, it was concluded that the hypothesis in the existing model was well representing the actual drivers' behaviour. The deceleration for vehicles approaching the horizontal curves was ranged $0.39{\sim}1.06m/s^2$ with the average of $0.66m/s^2$. The average acceleration for the vehicles departing horizontal curves was $0.22m/s^2$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.293-301
• /
• 2005

In case of the roads that pass the mountain area, the cut sections or the tunnels are constructed. And In winter season it appears sunshine few in the specific segment, the shade is continued last and the freezing sections occur. So, the attention is necessary in traffic safety. This study was to evaluate the influence of sunshine and surface freezing sections expected in route plans of roads using GIS and makes alternative ideas in road stability security. After selecting 29 km sections of Donghae highway and creating a 3 dimensional terrain surface through the digital conversion of design plan data, it reflects the road alignment data of the same coordinates and a 3 dimensional road modeling is created. It set shadow time of road surface for the solar trace in the winter solstice in 20 minute interval. Shade areas are displayed and inputed in polygon data by manual vertorizing. Graphic and attribute data of this shade section is constructed in geodatabase of ArcCatalog. And it extracted the freezing section using intersect fuction of the GIS spatial analysis. By analyzing the winter meteorological data of temperature, rainfall, snowfall, humidity, and etc. and grasping dangerous freezing section of the road surface effectively, it will be able to make alternative ideas of the preliminary stability evaluation reflected in basic design.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.73-84
• /
• 2005

Highway design criteria are considering roadway safety and smooth driving maneuver. However, a certain highway alignment within design criteria often leads drivers to undesirable situation due to the differences between the original intention of design criteria and the unintended result of drivers' cognition. The differences between them often result in traffic accidents. In order to reduce accident process, highway safety facilities are installed on those roadway sections. However, the relationship between highway environments and human factors has not been deeply studied in Korea. In this study. vertical roadway sections are constructed with 3-D graphical tools. This vertical roadway sections are simulated on a driving simulator in order to identify the differences of drivers' cognition on different roadway environments. Based upon the collected data from the driving simulator, canonical correlation analysis and canonical discriminant analysis of quantification theory II have been performed in order to figure out impacting factors on the degree of roadway safety. Also, based upon quantification theory I. the relationship between roadway safety facilities and the degree of safety has been analyzed.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.91-101
• /
• 2003

This study modeled 4-lane highway in three-dimensional virtual reality in order to overcome difficulties of field experiment. and the research subject was placed in a driving simulator. We survey the driver's cognitive characteristics to the alignment changes in the three-dimensional virtual reality highway. Especially, maximizing the identity of driving movements and virtual scenery on the basis of the data obtained by dynamic analysis module. we minimized simulator sickness for the graphic module of driving simulator. And we carried out cognitive evaluation on the basis of adjective words extracted by dictionary and the opinion of specialist. In this study LISREL model was used to detect the causal relation between geometry and safety in cognitive side, and found that geometric change affects the safety of drivers by static and dynamic road safety model in three-dimensional combined alignments. As the result, for constructing safety road. we consider drivers' cognitive characteristics as human factors in road design, and we think that they are very important factors to improve road safety.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.2
• /
• pp.41-55
• /
• 2005

In an effort to preserve biodiversity in increasingly fragmented green patches, Korea has been installing eco-corridors over or under some arterial or expressways. In a survey of 43 such eco-corridors installed up until the year 2003, some problems and issues were identified. Some selected overseas eco-corridors were also investigated to find implications for the improvements of future installations in Korea. Major findings are; - For most existing eco-corridors, target species are not specified and locations of the eco-corridors are not well considered, and consequently it is questionable if wildlifes are crossing them - Most of existing eco-corridors lack supporting facilities such as fences that guide wildlife to cross them and prevent them from running into the road - Planting on the eco-corridors is not sufficient, not diverse enough in species, and not very considerate of wildlife but designed and planted in a similar manner as in urban parks - Where target species are not well specified, the location, width, cross section, and other aspects of the eco-corridors can not be optimized - It is suggested that eco-corridors are planned at early stages of road planning so that the number and locations of eco-corridor(s) decided as necessary and even the alignment and design of roads consider the installation of eco-corridors in advance - Monitoring of wildlife crossings is needed for improved eco-corridor planning and design - Nationwide green network plan is desirable to be made first and eco-corridors fit into it.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.169-179
• /
• 2014

PURPOSES : This study is to conduct the research on the design principle for the driver's safety and comfort in installing consecutive curves of superhighway. METHODS : Superhighway does not currently exist in domestic area. Thus, this study is conducted by collecting driving behavior usage of 30 people who are involved in the members of the virtual driving simulation. By identifying the distribution characteristics of each scenario in ANOVA & Tukey Test, the distribution are categorized into three groups. RESULTS : In the case of Group A in Section 3 (R2 entry part), lane departure exceeds the safety standard, which means to be risky condition. And then in the case of Group B and C, the lane departure values applying theoretical formula was evenly distributed compared to the proven values. CONCLUSIONS : Based on the result, the continuous curve design principles at superhighway should follow three standards as follow. First, an additional linear part needs to be inserted between two curves. Second, what if inserting the linear part is difficult, it would be better to insert a curve more than 2,000m. Third, R1/R2 ratio should not be over two. This design primarily aims to the safety of the operator. Such road alignment also meets the expectations of drivers, thus, it may help drivers to be compatible and amenable while driving continuous curve in superhighway.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.34-42
• /
• 2002

본 연구에서는 사회발전과 더불어 성장하는 주요도로의 교통량을 충족시키기 위해 지속적으로 진행되는 도로건설사업의 노선선정 및 그에 따른 환경적인 문제의 중요성이 인식되는 바 가장 적절한 도로건설사업을 위해 지리정보시스템 기법을 도입하여 도로건설에 있어서 고려되는 몇 가지 기본자료를 선택하고 데이터베이스를 구축하여 구축된 데이터의 분석과 활용에 의해 노선선정에 따른 절 성토량과 기존의 도로설계프로그램으로 절 성토량을 산정하여 비교하였고 기존의 수작업에 의한 설계된 최적노선과 GIS에서 자동 선정된 노선을 비교하여 도로건설사업에 따른 객관적이고 경제적, 환경적, 기술적 문제를 해결 평가하고 Virtual GIS로 가상현실 구현과 기존의 도로설계 프로그램을 이용한 삼차원 도로설계를 제시하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.551-557
• /
• 2004

미래의 텔레매틱스(telematics)환경에서 차량항법과 관련된 주요 핵심 기술은 동적 경로 안내 이외에 차량 자체의 지능화를 통해 운전자에게 주행 중인 도로에서 급경사, 급커브 구간에 대한 정보를 사전에 경고함으로써 사고를 방지하는 운전자 보조 및 경고 시스템(driver assistance and warning system) 구현으로 전망되고 있다. 이와 같은 기술이 구현되기 위해서는 현재 차량항법용 수치도로지도에서 도로의 단순 위치정보만으로는 불가능하며 도로의 곡선구간에서 평면 곡선반경과 같은 도로의 선형설계요소에 대한 정보가 필수적이다. 따라서 본 연구에서는 현재 전국적으로 구축되어있는 1/1000 수치지도의 도로중심선을 이용하여 실제 도로의 평면 선형설계요소를 자동으로 추출하기 위한 알고리즘을 개발하였고 이를 GUI 환경의 프로그램으로 구현함으로써 기존 도로의 정확한 평면 선형정보를 경제적이면서 효율적으로 획득할 수 있게 되었다.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.141-153
• /
• 2010

The study is about the development of operating speed prediction models aimed for an evaluation of design consistency of four lane rural roads. The main differences of this study relative to previous research are the method of data collection and classification of road alignments. The previous studies collected speed data at several points in the horizontal curve and approaching tangent. This method of collection is based on the assumption that acceleration and deceleration only occurs at horizontal tangents and the speed is kept constant at horizontal curves. However, this assumption leads to an unreliable speed estimation, so drivers' behavior is not well represented. Contrary to the previous approach, speed data were collected with one and data analysis using a speed profile is made for data selection before building final models. A total of six speed prediction models were made according to the combination of horizontal and vertical alignments. The study predicts that the speed data analysis and selection for model building employed in this study can improve the prediction accuracy of models and be useful to analyze drivers' speed behavior in a more detailed way. Furthermore, it is expected that the operating speed prediction models can help complement the current design-speed-based guidelines, so more benefits to drivers as real road users, rather than engineers or decision makers, can be achieved.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.55-67
• /
• 2005

This study presented the route location method by applying AHP and evaluating quantitatively. This study developed the program that can be easily applied to this kind of road design, and built the decision support system for route location. The study results are summarized as follows ; We could quantitatively evaluate the appropriateness of exiting routes by applying the AHP based on GIS. If we apply this to the roads that will be newly constructed, we can make the objective and reliable route location when making road plans and basic designs. We improved the technique of route location by applying the decision support system with third-dimensional data, which considers even the vertical alignment plan, to the existing decision support system with second-dimensional data. And, since we can set those data such as vertical slope, earth-volume, structure size, location and construction cost to independent variables, we can make road designs more scientifically and reasonably.