• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.12
• /
• pp.21-27
• /
• 2012

Korean Industrial Standards for lightning protection system complies with IEC standards. However, the standards are applicable only to buildings and structures more than 20 meters in high. Therefore, it is necessary to determine whether lightning protection system should be installed on structures lower than 20 meters high. This paper proposes an efficient method of assessing risk against lightning of structures lower than 20 meters high. The method suggests simplified lightning protection system and provides selecting an appropriate protection level. The suggested method assumes that structure under assessment has no lightning protection system and there is no person around the structure at the moment of lightning stroke. A simplified method of assessing the risk to human within the structure is developed by adopting the general assessment factor. The selection of a protection level is possible by comparing tolerable risk with physical damage risk caused by a direct lightning. Finally, this paper gives ways to establish surge protection measures when a structure with lightning risk is within a radius of 2km from the assessed structure even if this structure requires no lightning protection system.

• Journal of Plant Biotechnology
• /
• v.36 no.4
• /
• pp.360-365
• /
• 2009

Over the last five years, we have conducted research on risk assessment of domestically developed genetically modified (GM) crops and found a number of factors which could delay risk assessment process. In this review, we described such cases and discussed the problem of transgene cassette integration, the lack of information on vectors, the poor quality control in seed production and absence of bioinformatic analysis on amino acid sequence homology before GM crop development. To solve these problems, we have suggested the introduction of the screening system of elite event before risk assessment process and quality control strategies for GM seed production. In addition, we suggested that the developers of GM crops should understand the importance of risk assessment and management for the commercialization of those crops and consider the biological and ecological characteristics of host plants. Consistent communications may need to be established between GM crop developers, risk assessors and risk managers at the initial stages of GM crop development to reduce trial-and-errors.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.105-112
• /
• 2015

Sawmilling industry remained a high risk with the average 4.73% of industrial accidents in 2010-2012 that was eight times that of general manufacturing. Sawmilling industry had 200 industrial accidents victim in average. Manufacturing process in sawmill industry contained dangerous machinery such as conveyors, roller, saw ( band saw, circular saw) etc. It may be effective to figure out the type of industrial accidents occurred in the past and extend risk assessment which can predict hazard such as near miss when implementing exposure or potential dangers in sawmill industry. This study conducted research on the actual condition on the place of industrial accident occurrence, detailed work and contact object when injured, and injured part targeting 643 businesses which had industrial accidents in 2010-2012. As the results, RPN of general sawmill industry was the highest 'ganglip saw' with 36,157. RPN of the following order were 'moving truck' with 25,454, 'special machining operations' with 22,283. Also, probability of general sawmill industry was a lots within 1 year, while risk appeared a lots within 5 years. So, risk assessment shall be needed to emphasis on accident prevention of sawmill industry. And additional work will be needed on the risk assessment in hazard prevention work of supervisors.

• Environmental Engineering Research
• /
• v.18 no.4
• /
• pp.221-227
• /
• 2013

A risk assessment of environmental media was performed for the inhabitants in the area of the abandoned Nokdong metal mine. Soil, groundwater, and crop samples were collected from September to October 2008 around the mine. After pretreatment of these samples, metal concentrations were measured, and a risk assessment was performed using the Korean soil-contamination risk assessment guidelines. Lead (Pb) and arsenic (As) intake rates were the highest for inhalation of soil dust. The cancer risks from ingestion of As-contaminated groundwater, inhalation of As-, Cd-, and Pb-contaminated soils, and contact of As-contaminated soils exceeded the acceptable risk. The sum of all carcinogenic risks was $9.29{\times}10^{-3}$. The non-carcinogenic risk was highest for ingestion of As-contaminated water (11.0), followed, in descending order, by inhalation of Hg-contaminated soil and ingestion of Pb-contaminated water. Most of the risks were associated with As, Cd, Pb, and Hg contamination, and therefore, these metals were considered to be potential toxic carcinogens and non-carcinogens for humans in this area. In this study, the non-carcinogenic risks of ingestion of contaminated water or crops, as well as those associated with the inhalation of soil dust were observed.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.3
• /
• pp.135-145
• /
• 2020

Recently, the disaster rate of the construction industry has increased with high-rise, and complexity of the building, unlike the decrease in the disaster rate in other industries. Although risk assessment is performed to reduce the occurrence of disasters, it is difficult to estimate the risks accurately due to activity in which no disaster has occurred, and inconsistencies in the level of details of work. In this study, in order to evaluate the risk of the major activity for the apartment construction work, the activity was identified by referring to the risk assessment model of construction industry type by the KOSHA. The construction work types and activities were consistently organized in level of work into nine work types and 82 activities were through experts consultation. Analyzing the disaster types that occurred during work through KOSHA disaster cases, calculating the probability of disaster occurrence according to the type of disaster, and combining the probability of disaster with the severity of disaster to estimate the risk assessment method was presented. Using the daily report of the construction site of the apartment, the results of a case study confirmed the validity of the risk calculation method presented in this study.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.55-64
• /
• 2011

Objective: The aim of this paper is to introduce the activities and research trends of human reliability analysis including brief summary about contents and methods of the analysis. Background: Various approaches and methods have been suggested and used to assess human reliability in field of risk assessment of nuclear power plants. However, it has noticed that there is high uncertainty in human reliability analysis which results in a major bottleneck for risk-informed activities of nuclear power plants. Method: First and second generation methods of human reliability analysis are reviewed and a few representative methods are discussed from the risk assessment perspective. The strength and weakness of each method is also examined from the viewpoint of reliability analyst as a user. In addition, new research trends in this field are briefly summarized. Results: Human reliability analysis has become an important tool to support not only risk assessment but also system design of a centralized complex system. Conclusion: Human reliability analysis should be improved by active cooperation with researchers in field of human factors. Application: The trends of human reliability analysis explained in this paper will help researchers to find interest topics to which they could contribute.

• Journal of muscle and joint health
• /
• v.31 no.2
• /
• pp.65-74
• /
• 2024

Purpose: This study was conducted to verify fall predictive power and reasonable fall risk assessment tool by a comparative analysis of the sensitivity, specificity, positive forecast and negative forecast of each tool by applying Morse Fall Scale (MFS), Johns Hopkins Fall Risk Assessment Tool (JHFRAT), and Fall Assessment Scale-Korean version (FAS-K) through electronic medical records to adult patients hospitalized in a general hospital in Korea. Methods: We performed a retrospective evaluation study from January to December 2018, 123 fall groups experiencing falls during hospitalization and 123 non-falls groups were selected. Data presented a reasonable assessment tool that predicts and distinguishes fall high-risk patients through area comparison based on the ROC curve for each tool. Results: In the ROC curve analysis by fall risk assessment group, the AUC of MFS is shown to be .706 (good), JHFRAT is shown to be .649 (sufficient) and FAS-K is shown to be .804 (very good). FAS-K at a cut-off score of 4, sensitivity, specificity, and positive and negative prediction values were 83.7%, 60.2%, 67.8%, and 78.7%, respectively. Conclusion: Based on the above findings, it is believed that the FAS-K was presented as a suitable and reasonable tool for predicting falls for adult patients in general hospitals.

• Environmental Analysis Health and Toxicology
• /
• v.25 no.2
• /
• pp.153-159
• /
• 2010

Perfluorooctane sulfonic acid (PFOS) and Perfluorooctanoic acid (PFOA) are the principal chemicals known as perfluoroalkyl acids (PFAs). Despite the widespread use of these compounds, relatively little is known about their fate and effects. The purpose of this study was to determine the toxic effects of PFOS and PFOA on Daphnia magna. In the acute toxicity test, D. magna were exposed for 48 hours at concentrations of 0, 30, 45, 67.5, 101.25 and 151.88 mg/L PFOS, and 0, 100, 160, 225, 337.5 and 506.25 mg/L PFOA, respectively. In the case of chronic toxicity test, D. magna were exposed through water for 21 days at concentrations of 0, 0.375, 0.75, 1.5, 3 and 6 mg/L PFOS, and 0, 1.25, 2.5, 5, 10 and 20 mg/L PFOA, respectively. Acute toxicity was assessed on the basis of immobility, while chronic toxicity was assessed on the basis of fecundity. The acute toxicity test on PFOS and PFOA showed that the values of $EC_{50}$ were 50.90 mg/L and 253.47 mg/L, respectively. In the chronic test, fecundity was reduced significantly at 1.5 mg/L of PFOS and 10 mg/L of PFOA, respectively. These results indicated that PFOS is more toxic to zooplankton than PFOA, and both chemicals have some hazard demonstrates risk for acute or chronic toxicity to freshwater organism.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.670-678
• /
• 2018

In coastal waters where the traffic volume of the ship is high, there is a high possibility of a collision accident because complicated encounter situations frequently occurs between ships. To reduce the collision accidents at sea, a quantitative collision risk assessment is required in addition to the navigator's compliance with COLREG. In this study, a new collision risk assessment system was developed to evaluate the collision risk on ship's planned sailing routes. The appropriate collision risk assessment method was proposed on the basis of reviewing existing collision risk assessment models. The system was developed using MATLAB and it consists of three parts: Map, Bumper and Assessment. The developed system was applied to the test sea area with simple computational conditions for testing and to actual sea areas with real computational conditions for validation. The results show the length of own ship, ship's sailing time and sailing routes affect collision risks. The developed system is expected to be helpful for navigators to choose the optimum safe route before sailing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.555-562
• /
• 2023

The Railway Safety Act of 2014 strengthened the 'Railway Safety Management System' to establish autonomous safety management for railway operators and railway facility managers. Accordingly, it is required to establish and implement risk assessment and safety measures for risk management. However, the current risk assessment system is carried out at the fragmented safety management level within individual fields, which has caused difficulties in establishing and implementing risk assessment and safety measures. In addition, the technical standards of the safety management system stipulate that risk assessment of railway operators is mandatory, so standardized standards for risk assessment of railway facilities and railway vehicle maintenance are needed. Therefore, in this paper, we first verified railway risks by analyzing railway accident data for the last 10 years, and proposed a standardized framework to effectively assess and manage risks through a case study of a condition-based smart maintenance system developed based on railway vehicle maintenance data.