• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.119-127
• /
• 2014

This study tried to develop a basis for quantitative index of working postures associated with WMSDs (Work-related Musculoskeletal Disorders) that could overcome realistic restriction during application of typical checklists for WMSDs evaluation. The baseline data(for a total of 603 jbs) for this study was obtained from automobile manufacturing company. Specifically, data for back posture was analyzed in this study to have a better and more objective method in terms of job relevance than typical methods such as OWAS, RULA, and REBA. Major statistical tools were clustering, logistic regression and so on. The main results in this study could be summarized as follows; 1) The relationship between working posture and WMSDs symptom at back was statistically significant based on the results from logistic regression, 2) Based on clustering analysis, three levels for WMSDs risk at back were produced for flexion as follows: low risk(< $18.5^{\circ}$), medium risk($18.5^{\circ}{\sim}36.0^{\circ}$), high risk(> $36.0^{\circ}$), 3) The sensitivities on risk levels of back flexion was 93.8% while the specificities on risk levels of back flexion was 99.1%. The results showed that the data associated with back postures in this study could provide a good basis for job evaluation of WMSDs at back. Specifically, this evaluation methodology was different from the methods usually used at WMSDs study since it tried to be based on direct job relevance from real working situation. Further evaluation for other body parts as well as back would provide more stability and reliability in WMSDs evaluation study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.1
• /
• pp.35-45
• /
• 1996

The assesment of the safety of ship's transit in a curved narrow channel consists of the maneuvering safety determined by the chance of running aground, the maneuvering difficulty determined by ship's workload, and shiphandler's subjective evaluation. In this study to examine the correlation between shiphandler's subjective evaluation and the maneuvering risk, the real-time and full-mission shiphandling simulator in the Korea Marine Training & Research Institutes(KMTRI) was utilized. On the conning bridge of the shiphandling simulator, 50 experienced masters conducted the modeled vessel of 60,000 deadweight tonnage along the designed channel under 3 different environmental conditions. The findings were as follows : (1) The frequencies of stress levels, work difficulties, vessel controllability and overall workload of shiphandlers are similar irrespective of environmental conditions and they are able to be represented as shiphandler's subjective evaluation. (2) It s possible to assess and analyze theoretically the correlation between the shiphandler's subjective evaluation and maneuvering risk under each environmental condition by quantifying the data obtained from the test. The results are as follows : ① As the degree of maneuvering risk increases, the shiphandler's subjective evaluation increases sharply near the curvature area of the designed channel. ② In the area of the curvature of the designed channel, maneuvering risk sincreases sharply with the danger of running aground under the environmental condition of current and wind coming from the stern.

• Journal of Environmental Health Sciences
• /
• v.48 no.3
• /
• pp.159-166
• /
• 2022

Background: A quantitative structure-activity relationship (QSAR) model was adopted in the Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH, EU) regulations as well as the Act on Registration, Evaluation, etc. of Chemicals (AREC, Republic of Korea). It has been previously used in the registration of chemicals. Objectives: In this study, we investigated the correlation between the predicted data provided by three prediction programs using a QSAR model and actual experimental results (acute fish, daphnia magna toxicity). Through this approach, we aimed to effectively conjecture on the performance and determine the most applicable programs when designating toxic substances through the AREC. Methods: Chemicals that had been registered and evaluated in the Toxic Chemicals Control Act (TCCA, Republic of Korea) were selected for this study. Two prediction programs developed and operated by the U.S. EPA - the Ecological Structure-Activity Relationship (ECOSAR) and Toxicity Estimation Software Tool (T.E.S.T.) models - were utilized along with the TOPKAT (Toxicity Prediction by Komputer Assisted Technology) commercial program. The applicability of these three programs was evaluated according to three parameters: accuracy, sensitivity, and specificity. Results: The prediction analysis on fish and daphnia magna in the three programs showed that the TOPKAT program had better sensitivity than the others. Conclusions: Although the predictive performance of the TOPKAT program when using a single predictive program was found to perform well in toxic substance designation, using a single program involves many restrictions. It is necessary to validate the reliability of predictions by utilizing multiple methods when applying the prediction program to the regulation of chemicals.

• The Journal of Fisheries Business Administration
• /
• v.39 no.3
• /
• pp.1-23
• /
• 2008

Recently, traceability systems are introduced as a new food safety information system. To trace food products efficiently, they must have an automatic identification capability at the individual product level. This capability can be gained through RFID technology. But there is not yet any performance evaluation tool on RFID-based traceability systems (RFID-TS). This study developed an evaluation tool of RFID-TS. To develop the tool, this study considered the objective and the components of RFID-TS as their performance constructs. According to Churchill's paradigm, the tool was established through two stages. The final evaluation tool consisted of four constructs (risk, operational benefits, IS (information system), and network) and nine sub-constructs. Among the four constructs, risk and IS were found as the most important performance constructs through regression analysis. Among the nine sub-constructs, service (which belonged to the IS construct) and economic risk (which belonged to the risk construct) were found as the most important performance sub-constructs.

• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.53-62
• /
• 2008

Recently, the potential risks of tank lorry transportation from the petrochemical plant have been increasing, so the research was performed to build up the evaluation criterion of the transportation safety, as well as aggressive risk+assessment of a variety of chemical materials. This research was applied to the Maximum Credible Accident Analysis technique and modeled on the risk management of chemical transportation using the following four steps for risk evaluation, firstly the comparison of representative fype and standard of hand ling chemical materials transported by tank vehicles secondly, specific classification of potential hazards thirdly, grasp and recognition of virtual accident scenario at last, the risk evaluation of virtual accident scenario(qualitative/quantitative - chemical release modeling).

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.3
• /
• pp.31-40
• /
• 2022

Domestic disaster risk maps are mainly produced and studied as a single disaster map by grid unit and disaster type. In particular, it is necessary to present an evaluation method of the disaster risk map that is more suitable for the relevant facility (local road) in order to utilize the work of practitioners who are mainly in charge of facility maintenance. In this study, an evaluation method was presented to evaluate the risk with a focus on local roads by using the landslide risk map and debris flow risk map provided by the Korea Forest Service. In addition, the risk was evaluated and verified for the provinces located in Gangwon-do. As a result of the evaluation, it was possible to evaluate the risk of grades 1 to 5 for 1,513 evaluation sections in the evaluation section with a total length of 234.59 km.

• International journal of steel structures
• /
• v.18 no.5
• /
• pp.1710-1722
• /
• 2018

Investigating remained damages from terrible earthquakes, it could be concluded that some events including explosion because of defect and failure in the building mechanical facilities or caused by gas leak, firing, aftershocks, etc., which are occurred during or a few time after the earthquake, will increase the effects of damages. In this paper, by introducing a complete risk analysis which included direct and indirect risks for earthquake (the main shock) and aftershock, the corresponding robustness index was created that called as "robustness index sequential critical events risk-based". One of the main properties of the intended robustness index is using progressive collapse percentage in its evaluation. Then, in a numerical example for a 4-storey moment resisting steel frame structure, a method is presented for obtaining all effective parameters in robustness index evaluation based on the intended risk and at last its results were reported.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.619-624
• /
• 2003

Evaluating the risk of collision quantitatively plays a key role in developing the expert system of navigation and collision avoidance. This study analysed thoroughly how to determine the threshold function related to the avoidance time as described in the new evaluation of collision risk using sech function, and developed the appropriate equation as applicable.

• Toxicological Research
• /
• v.31 no.3
• /
• pp.221-226
• /
• 2015

With the diversification and internationalization of the food industry and the increased focus on health from a majority of consumers, food safety policies are being implemented based on scientific evidence. Risk analysis represents the most useful scientific approach for making food safety decisions. Total diet study (TDS) is often used as a risk assessment tool to evaluate exposure to hazardous elements. Many countries perform TDSs to screen for chemicals in foods and analyze exposure trends to hazardous elements. TDSs differ from traditional food monitoring in two major aspects: chemicals are analyzed in food in the form in which it will be consumed and it is cost-effective in analyzing composite samples after processing multiple ingredients together. In Korea, TDSs have been conducted to estimate dietary intakes of heavy metals, pesticides, mycotoxins, persistent organic pollutants, and processing contaminants. TDSs need to be carried out periodically to ensure food safety.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.153-158
• /
• 2013

Objective: This study aims to suggest different approaches in analyzing risks associated with musculoskeletal disorders (MSDS) for risk assessment. Background: Upon concluding that the changes in the industrial environments have made it hard to regulate diverse risk factors, the government has implemented a policy for risk assessment. Method: This study has proposed a method, creating programs using Excel that perform qualitative or quantitative analysis, for evaluating risk factors in risk assessments and has applied this in manufacture and service industries. Results: To verify the validity of the developed program, risk assessment has been performed on restaurant chefs as an example. For quantitative evaluation, the study has suggested approaches using the results for REBA evaluation and the analysis report on the work scenes of a fitting-shop in a shipbuilding industry. Application: Constructing and adapting a system using Excel in evaluating risk factors for risk assessments as this study suggests, is expected to contribute to revitalizing risk assessments.