• Korean Journal of Veterinary Research
• /
• v.46 no.2
• /
• pp.159-164
• /
• 2006

A stochastic simulation model incorporated with Reed-Frost approach was derived for evaluating diagnostic performance of a test used for a screening program of an infectious disease. The Reed-Frost model was used to characterize the within-herd spread of the disease using a hypothetical example. Specifically, simulation model was aimed to estimate the number infected animals in an infected herd, in which imperfect serologic tests are performed on samples taken from herds and to illustrate better interpreting survey results at herd-level when uncertainty inevitably exists. From a risk analysis point of view, model output could be appropriate in developing economic impact assessment models requiring probabilistic estimates of herd-level performance in susceptible populations. The authors emphasize the importance of knowing the herd-level diagnostic performance, especially in performing emergency surveys in which immediate control measures should be taken following the survey. In this context this model could be used in evaluating efficacy of a survey program and monitoring infection status in the area concerned.

• Journal of Navigation and Port Research
• /
• v.35 no.9
• /
• pp.729-733
• /
• 2011

The maritime risk assessment is important not only to evaluate the safety level of the ports and waterways but also to reduce potential maritime accidents at sea in terms of the proactive measures of the maritime accidents. In this paper, the collision risk assessment in Mokpo waterways has been carried out based on the IALA recommended model, IWRAP. To evaluate the accident probabilities in Mokpo waterways, all data of vessels were collected from AIS and Radar observations data and the computer simulations were carried out. To assess the risk on the traffic, the scenario-base approach has been applied to the Mokpo waterway by using the maritime accident statics over the past 5 years.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.114-122
• /
• 2015

FMEA and FTA have been widely applied to the safety studies for railway systems respectively. But it would be more effective to use these two methods at a same time because these are complementary. This article suggests a FMEA-FTA combined analysis technique to evaluate the risk for railway systems. A FMEA-FTA combined risk evaluation model and process are proposed and a case study is dealt with for PBU(Pneumatic Breaking Unit), a major subsystem of a railway vehicle.

• Water Engineering Research
• /
• v.3 no.4
• /
• pp.215-234
• /
• 2002

Uncertainty in dam breach flood routing results was analyzed in order to provide the basis fer the investigation of their effects on the flood damage assessments and dam safety risk assessments. The Monte Carlo simulation based on Latin Hypercube Sampling technique was used to generate random values for two uncertain input parameters (i.e., dam breach parameters and Manning's n roughness coefficients) of a dam breach flood routing analysis model. The flood routing results without considering the uncertainty in two input parameters were compared with those with considering the uncertainty. This paper showed that dam breach flood routing results heavily depend on the two uncertain input parameters. This study indicated that the flood damage assessments in the downstream areas can be critical if uncertainty in dam breach flood routing results are considered in a reasonable manner.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.2
• /
• pp.11-26
• /
• 2003

While a number of Korean companies have undergone ceaseless restructuring to survive today's rapidly changing global economy, the brick and mortar industry has been exerting their efforts to enhance the productivity through the development of new products, quality improvement, cost reduction measures. At present, various risk-evaluation measures have been taken in the fields at the discretion of an enterpriser, though, the effective methods enabling quantitative analysis are insufficient. Accordingly, this study is intended to contribute to the synthetic safety manage -ment in the factory fields and to suggest the quantitative -risk-analysis system by introducing such safety-estimation steps as assortment of processes, pre-assessment of risk factors, decision of risks, counter measures against studied risks, establishment of remedies.

• Fisheries and Aquatic Sciences
• /
• v.24 no.2
• /
• pp.78-88
• /
• 2021

The annual consumption of fishery products, particularly sea squirt (Halocynthia roretzi), per person has steadily increased in South Korea. However, the quantitative risk of Vibrio parahaemolyticus following intake of sea squirt has not been analyzed. This study focuses on quantitative predictions of the probability of consuming sea squirt and getting of V. parahaemolyticus foodborne illness. The prevalence of V. parahaemolyticus in sea squirt was evaluated, and the time spent by sea squirt in transportation vehicles, market displays, and home refrigerators, in addition to the temperature of each of these, were recorded. The data were fitted to the @RISK program to obtain a probability distribution. Predictive models were developed to determine the fate of V. parahaemolyticus under distribution conditions. A simulation model was prepared based on experimental data, and a dose-response model for V. parahaemolyticus was prepared using data from literature to estimate infection risk. V. parahaemolyticus contamination was detected in 6 of 35 (17.1%) sea squirt samples. The daily consumption quantity of sea squirt was 62.14 g per person, and the consumption frequency was 0.28%. The average probability of V. parahaemolyticus foodborne illness following sea squirt consumption per person per day was 4.03 × 10^-9. The objective of this study was to evaluate the risk of foodborne illness caused by Vibrio parahaemolyticus following sea squirt consumption in South Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.997-1006
• /
• 2015

This study analyzed urban infrastructure risk to flooding based on the possibility map of flooding calculated by neural network model focusing on Seoul. This study found that Gangnam-gu, Songpa-gu, Seocho-gu and Seodaemun-gu contained relatively large high-risk areas to flooding. Over $4.17km^2$ of transportation facilities were located in high-risk area to flooding and Gangnam-gu included over $0.85km^2$ of infrastructures exposed to high inundation risk. This study is meaningful in that it first applied the neural network modeling to flooding risk assesment and results of risk assessment can be incorporated into various planning process.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.150-158
• /
• 2019

Soil contaminated with heavy metals from artisanal gold mining in Anka Local Government Area in Northwestern Nigeria was investigated to evaluate the human health risk as a result of heavy metals. Measured concentration of heavy metals and exposure parameters were used to estimate human carcinogenic and non-carcinogenic risk. GIS-based Kriging method was utilized to create a prediction maps of human health risks and probability maps of heavy metals concentrations exceeding their threshold limits. Hazard index calculation showed that 21 out of 23 locations are posing non-cancer risk for children. Adults and children are at high cancer risk in all locations as the total cancer risk exceeded $1{\times}10^{-6}$ (the lower limit CTR value). Kriging model showed that only a very small area in Anka has a hazard index of less than unity and cumulative target risk of less than $1{\times}10^{-4}$, indicating a significant carcinogenic and non-carcinogenic risks for children. The probability of heavy metals to exceed their threshold concentrations around the study area was also found to be high.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.4
• /
• pp.45-51
• /
• 2021

A runway safety area (RSA) is defined as the surface surrounding the runway prepared or suitable for reducing the risk of damage to airplanes in the event of an undershoot, overshoot, or excursion from the runway. The Runway Stripe is a defined area including the runway stopway, if provided, intended firstly to reduce the risk of damage to aircraft running off a runway, and secondly, to protect aircraft flying over it during takeoff or landing operations. This study used 2 RSA analysis models; RSARA and LRSARA. The analysis utilizes historical data from the specific airport and allows to take into consideration specific operational conditions to which movements are subject, as well as the actual or planned RSA conditions in terms of dimensions, configuration, and boundaries defined by existing obstacles. This study applied the RSA and LRSA risk assessment models to a domestic airport that do not meet the criteria required by standards for aerodrome physical characteristics. The airport is considering a method to secure the runway strip standard through the displaced threshold. This study intends to confirm through quantitative risk estimation whether meeting facility standards through the runway displaced threshold leads to a positive change in risk mitigation.

• Journal of the Korean Society of Safety
• /
• v.23 no.4
• /
• pp.72-78
• /
• 2008

In any form of construction work, it is essential that accidents be prevented at every stage from foundation preparation to build completion. For this, it is necessary to use models that can assess risk and provide instruction for safe work processes so that the risk of accidents is reduced. Currently, however, very few models can perform these tasks. In this paper, we presents a model that assesses risk quantitatively by analyzing risk factors involved in stage of construction such as foundation work, erection work, structural work, equipment work, finishing work and etc work. The model performs assessment based on examples of accidents and by investing actual conditions during construction. In addition, we presents in this paper a safety management system was developed to assess risk during construction and to effectively train laborers.