• Journal of Information Technology Applications and Management
• /
• v.26 no.6
• /
• pp.47-63
• /
• 2019

The volatility of major crypto currencies was examined and they are diagnosed whether they have a systematic risk or not, by estimating market beta representing systematic risk using GARCH( Generalized Auto Regressive Conditional Heteroskedastieity) model. First, the empirical results showed that their prices are very volatile over time because of the existence of ARCH and GARCH effects. Second, in terms of efficiency, asymmetric GJR model was estimated to be the most appropriate model because the standard error of a market beta was less than that of the OLS model and GARCH model. Third, the estimated market beta of Bitcoin using GJR model was less than 1 at 0.8791, showing that there is no systematic risk. However, unlike OLS model, the market beta of Ethereum and Ripple was estimated at 1.0581 and 1.1222, showing that there is systematic risk. This result shows that bitcoin is less dangerous than Ripple and Ethereum, and ripple is the most dangerous of all three crypto currencies. Finally, the major cryptocurrency found that the negative impact caused greater variability than the positive impact, causing bad news to fluctuate more than good news, and therefore good news and bad news had a different effect on the variability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3506-3513
• /
• 2009

This study is to analyze the ripple effects of Jeju International Wind Ensemble Festival on Jeju regional economy and to explain the influence of the festival on Jeju regional society and culture. This study analyzed the economic ripple effects of the tourism industry with the Jeju inter-industry relation table. To explain the influence on Jeju regional society and culture, this study examined society-integrating part, policy-advertising part, culture-developing part, and industry-developing part.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.35-42
• /
• 2019

In this paper, we analyze the practical problems of the regenerative start method proposed to improve the starting characteristics of the TBM(Tunnel boring machine)system and propose a solution. In order to solve the speed ripple problem in the previous research results, we first analyze the problems occurring in the system and propose a method to compensate for them. By applying the improved method to the actual system, we compared the results with the conventional system and verified the effect of the proposed method.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.319-328
• /
• 2016

In this study, we first briefly introduce the effect of circulating current control on the modulation signal of a modular multilevel converter (MMC). The maximum modulation index is also theoretically derived. According to the optimal modulation index analysis and the model in the continuous domain, different DC-side output impedance equivalent models of MMC with/without compensating component are derived. The DC-side impedance of MMC inverter station can be regarded as a series xR + yL + zC branch in both cases. The compensating component of the maximum modulation index is also related to the DC equivalent impedance with circulating current control. The frequency characteristic of impedance for MMC, which is observed from its DC side, is analyzed. Finally, this study investigates the prediction of the DC voltage ripple transfer between two-terminal MMC high-voltage direct current systems under unbalanced conditions. The rationality and accuracy of the impedance model are verified through MATLAB/Simulink simulations and experimental results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.12-23
• /
• 1995

Currents driven by irregular waves are modelled using numerical model with various empirical relations improved. Kitaigorodskii's equilibrium equation is refined to account for shoaling effect and used for checking the breaking condition. In order to compute the bottom friction realistically. equivalent roughness blights are estimated considering the ripple shape and bed load transport which may be significant the surf zone. Two sets of equations are employed to evaluate the ripple shape: one is suggested by Nielsen and the other by Madsen and Rogengaus. Both equations give similar shape of ripples. but Madsen et al. give lower value of ripple factor than Swart suggesting that the equivalent roughness becomes relatively small. Optimization technique is used to determine the proper values for the empirical parameters of $\kappa$-ι equations, and the longshore current velocity is computed using the values of empirical parameters determined by the optimization technique.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.878-888
• /
• 2016

Cogging torque has a negative impact on the operation of permanent magnet machines by increasing torque ripple, speed ripple, acoustic noise and vibration. In this paper Magnet Shifting Method has been used as a tool to reduce the cogging torque in inset Line Start Permanent Magnet Synchronous Motor (LSPMSM). It has been shown that Magnet Shifting Method can effectively eliminate several lower-order harmonics of cogging torque. In order to implement the method, first the expression of cogging torque is studied based on the Fourier analysis. An analytical expression is then introduced based on Permanent Magnet Shifting to reduce cogging torque of LSPMS motors. The method is applied to some existing machine designs and their performances are obtained using Finite Element Analysis (FEA). The effect of magnet shifting on pole mmf (magneto motive force) distribution in air gap is discussed. The side effects of magnet shifting on back-EMF, core losses and torque profile distortion are taken into account in this investigation. Finally the experimental results on two prototypes 24 slot 4 pole inset LSPMS motors have been used to validate the theoretical analysis.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.38-43
• /
• 2021

Permanent magnet linear synchronous motor (PMLSM) is suitable for use in cleanroom environments and have advantages such as high speed, high thrust, and high precision. If the stators are arranged in the entire moving path of the mover, there is a problem in that the installation cost increases. To solve this problem, discontinuous armature arrangement PMLSM has been proposed. In this case, the mover receives a greater detent force in the section where the stator is not arranged. When a large detent force occurs, it appears as a ripple component of the thrust during PMLSM operation. If the shape of the stator is changed to reduce the detent force, the characteristics of the back EMF are changed. Therefore, in this paper, the detent force and the harmonic components of back EMF were reduced through multi-purpose shape optimization. To this end, the FEA model was constructed and main effect analysis was performed on the major shape variables affecting each objective function. Then, the optimal shape that minimizes the objective function was derived through the response surface analysis method.

• Land and Housing Review
• /
• v.11 no.4
• /
• pp.15-26
• /
• 2020

This study analyzes the Domestic Economic Ripple Effect (DERE) of the Donghae-Bukpuseon Railway (DBR). Input-Output Analysis and Scenario Analysis are employed. First, the future demand is approximately 6.86 billion people, 1.4 billion tons of logistics, and future forecast production is 1.2 trillion won for passengers, and 0.15 trillion won for logistics. Second, the production inducement (PI) coefficient of the railway industry is 2.080, the value-added inducement (VAI) coefficient is 0.680, the import inducement (II) coefficient is 0.32 and the employment inducement (EI) coefficient is 6.45. Third, for the DERE, PI is 2.846 trillion won, VAI is 0.939 trillion won, II is 0.446 trillion won, and EI is 8,737 people/1 billion won. Fourth, PI is approximately 2.8 trillion won, and the payback period is 35 years. Scenario 1 (a 50% increase in the demand for tourism) takes approximately 27 years, Scenario 2 (an 100% increase), 20 years, and Scenario3 (an 150% increase), 16 years. The successful way of the DBR is to enlarge the linkage effect of trans-railways for which international cooperation and agreements are needed. Also, even if the DBR is isolated due to worsening inter-Korea relations, the development of tourism resources is important for public investment feasibility.

• Health Policy and Management
• /
• v.30 no.4
• /
• pp.438-443
• /
• 2020

The digital treatment technology industry is one of the core fostering industries of the Moon Jae-in government along with the global trend. The purpose of this study is to compare and analyze the investment and economic ripple effect on the related industries. To this end, we used the industry-related table, which is the actual measurement data for 2015 that the Bank of Korea actually measured and released every 5 years in 2019. The digital treatment technology industry was not clearly classified within Korea's industrial classification system, so the contents of the industry-related survey were analyzed, and the digital treatment technology industry was reclassified and then analyzed. As a result of the analysis, it was analyzed that the production induction effect of the digital treatment technology-related industry in 2015 was 1.770, the value-added induction effect was 0.875, and the employment induction effect was 19.128, which was higher than that of other industries in Korea. As a result of the analysis of the economic ripple effect (scenario 1), the production inducing effect was about 370 billion won, the added value inducing effect was about 185 billion won, and the employment inducing effect was 4,044 people. The results of this study are expected to play a large role in economic revitalization as the effect of inducing production, increasing employment, and creating added value through fostering the digital treatment technology industry is expected to play a large role in activating the economy. It is expected to play a large role in providing central medical services. Therefore, it is expected that policy support for revitalizing the digital treatment technology industry through active investment support and tax benefits from the government to foster the digital treatment technology industry is necessary.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.52-60
• /
• 1999

Fabricability of phase shifted grating filters has been theoretically studied by an effective index transfer matrix method. In the optical band-pass filter with multiple ${\lambda}/4$ phase-shifts, the phase-shift error and random variation of the grating period should be suppressed such that corresponding resonance frequency lies within, the filter pass-band. The tolerance for the relative error is less than $10^3$, and is quite stringent in typical filters for WDM application. End facet reflection produces ripple in the transmission spectra and the reflectivity should be less than 1% in order to keep the ripple less than 0.25dB. Also, the effect of waveguide absorption loss is enhanced by the resonance in the filter, and the absorption should be limited to 1dB/cm for the signal loss of less than 0.2dB.