• 한국레이저가공학회지
• /
• 제12권1호
• /
• pp.14-18
• /
• 2009

Ripple formation of femtosecond laser in stainless steel is investigated using 184 fs pulses with a center wavelength of 785 nm. The effect of the laser polarization relative to the translation direction is observed. For drilling with a certain aspect ratio, reflections at the hole walls take place, leading to a non-uniform intensity distribution deep inside the formed hole. Finally, it is shown that a circular polarization during the drilling process significantly improves the quality of the produced holes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.55-57
• /
• 2007

$CO_2$ laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400ums laser beam in rain focus sacred ground surroundings cellular, tissue without vitiation me by evaporation Poe of very small floor as is clean steam can. Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can. Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.159-161
• /
• 2007

$CO_2$ laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400ums laser beam in rain focus sacred ground surroundings cellular tissue without vitiation me by evaporation Poe of very small floor as is clean steam can. Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can. Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

• 한국컴퓨터산업학회논문지
• /
• 제8권2호
• /
• pp.97-102
• /
• 2007

[ $CO_2$ ] 레이저는 최소한 조직손상으로 이러한 효과를 얻는데 최적이라고 보며 0.1mm의 최소한의 세포조직 깊이에서 일어나는 효과의 근본적인 장점은 생체조직이나 내장기관에 안정적이다. 열에 의한 조직손상은 조직의 종류나 에너지밀도, 증발시간의 장단에 관계될 수가 있다 증발시간을 짧게 하면 주위세포의 열적손상은 $200\sim400um$이내에 일어나므로 레이저 빔은 비초점 영역에서 주위세포조직을 손상함이 없이 증발에 의한 제거나, 아주 얇은 층의 포를 깨끗하게 증발시킬 수 가 있다. $CO_2$레이저는 산부인과 응용에 표준이 되는 레이저시스템으로 외음부 상피내종양, 자궁암, 상피 종양에도 적용이 가능하다. 슈퍼펄스 출력은 거의 동일하나 펄스지속시간이 짧으면 레이저의 열적인 효과가 감소가 되므로 무엇보다도 산부인과용 펄스형 $CO_2$ 레이저의 펄스모듈 특성은 모드안정화가 매우 중요함으로, 본 연구에서는 짧은 펄스지속시간과 고출력밀도 되도록, DC-DC Converter에서 고주파로 스위칭 할수록 출력 DC의 ripple은 고주파화 되는데, 고주파화된 전류 리플은 출력 필터용 콘덴서의 량을 크게 줄일 수 있다. 출력의 ripple을 근사적으로 Zero까지 실현이 가능한 인덕터를 적용하여 특성실험을 통하여 실현하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.93-93
• /
• 2009

• 한국해안해양공학회지
• /
• 제4권2호
• /
• pp.63-71
• /
• 1992

연흔(ripple)이 발랄할 수 있는 이동상 해저면에서 파낭과 해류가 함께 작용할 때의 마찰력을 구하는 해법을 개발하였다. 본 해법에서 연흔의 형상에 대한 판별은 경험식을 이용하였다. 해법의 주요 골격은 프란틀의 혼합거리리논이며 해류의 감속률을 구하기 위한 확산계수비를 계산할 때 임의각의 합성영향을 고려하였으며, 모든 수치적분식의 解는 약산식으로 표현하여 계산효율을 증진시켰다. 또한 연흔을 고려하여 구한 마찰력을 기존 토사이동양 산정식에 적용하였으며 이를 발표된 실험자료와 비교하여 보았다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.45-48
• /
• 1997

The low frequency pulsed MIG welding process of new current waveform control to switch over unit pulse conditions (pulse current, pulse duration) in the fixed cycle was developed and its effect were investigated for aluminium and its alloy. By using this new welding process, the bead appearance having clear ripple pattern, such as TIG welding bead can be obtained and the gap tolerance of lap and butt welding joint can be expanded.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.214-214
• /
• 2013

Ion beam sputtering (IBS) by collision of energetic ions at surfaces is one of the representative methods for physical self-assembly. It is in spotlight as an easy tool to make nano structures in various sizes and shapes by controlling physical variablesWe investigate nano patterning on graphite. We found well-ordered nano ripple patterns after sputtering under the oblique angle and mean wavelengths of these ripples could be controlled as ion fluence increases from sub-10 nm to 80 nm. Each nano ripple is terminated by nano buds, which look like a cotton bud. We also examined the formation of various patterns on graphite by sputtering during swinging the sample at a constant angular velocity that have been never reported.

• 자원환경지질
• /
• 제29권5호
• /
• pp.639-660
• /
• 1996

The lowest formation of the Cretaceous Gyeongsang Supergroup, the Nakdong Formation, unconformably overlies the gneiss complex basement in Hadong, Gyeongsangnam-do and Gwangyang, Chullanam-do. The Nakdong Formation of the study area is 500-600 m thick and occurs as a belt shape. Based upon lithology, sedimentary structure, and bedding geometry the formation consists of three conglomerate facies (Gd, Gn, Gic), five sandstone facies (Sh-n, Sh-i, Sp, Sr, Sm), and four mudstone facies (Mf, Mfn, Mc, Mv). Sandstone facies are the most prominent in the study area. The twelve facies can be grouped into five facies associations. The depositional settings are elucidated from analyses of 12 facies and five facies associations of the formation. The lower part of the Nakdong Formation was deposited in alluvial plain, and the middle and upper parts were in a riverine system. The lithologies of the Nakdong Formation of the Gyeongsang Basin have been considered to consist of generally conglomerates and pebbly sandstones that were accumulated in alluvial fans. But the common lithology of the study area is sandstone which was formed in lower part of alluvial fan or fluvial setting. It is supposed that the coarser sedimentary sequence distributed west to the study area should be eroded out after deposition and early uplift, and the finer sandstone sequence in the east remains behind. The mineral composition of sandstones and the clast composition of conglomerates indicate that the Nakdong Formation was derived mainly from the metamorphic source rocks. Some reworked intraclasts were also supplied from the intrabasinal sedimentary layers. Paleocurrent data collected from cross-beddings, ripple marks, asymmetric sand dune suggest that most sediments were transported from north to south during the Nakdong Formation time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1368-1371
• /
• 2007

Laser-ablated ITO patterns showed the formation of shoulders at the edge of the ITO lines and a ripple-like structure of the etched bottom. When the laser ablation was applied in the fabrication of PDP panel, the laser-ablated ITO patterns showed a higher sustaining voltage than that of chemically wet-etched ITO.