• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.400-400
• /
• 2009

• 한국재료학회지
• /
• 제20권8호
• /
• pp.423-428
• /
• 2010

This study shows the effects of deionized (DI) rinse and oxide HF wet etch processes on silicon substrate during a photolithography process. We found a fail at the wafer center after DI rinse step, called Si pits, during the fabrication of a complementary metal-oxide-semiconductor (CMOS) device. We tried to find out the mechanism of the Si pits by using the silicon wafer on CMOS fabrication and analyzing the effects of the friction charge induced by the DI rinsing. The key parameters of this experiment were revolution per minute (rpm) and time. An incubation time of above 10 sec was observed for the formation of Si pits and the rinsing time was more effective than rpm on the formation of the Si pits. The formation mechanism of the Si pits and optimized rinsing process parameters were investigated by measuring the charging level using a plasma density monitor. The DI rinse could affect the oxide substrate by a friction charging phenomenon on the photolithography process. Si pits were found to be formed on the micro structural defective site on the Si substrate under acceleration by developed and accumulated charges during DI rinsing. The optimum process conditions of DI rinse time and rpm could be established through a systematic study of various rinsing conditions.

• Restorative Dentistry and Endodontics
• /
• 제46권2호
• /
• pp.30.1-30.13
• /
• 2021

Objectives: This study was conducted to compare the microleakage and characteristics of the resin-tooth tissue interface between self-etch and etch-and-rinse adhesive systems after 48 hours and 3 months. Materials and Methods: 40 extracted premolar teeth were randomly divided into 2 groups: 1-step self-etch adhesive system - Optibond^TM All-In-One, and 2-step etch-and-rinse adhesive system - Adper^TM Single Bond 2. Both groups were subjected to 500 thermocycles (5℃-55℃) before scanning electron microscope (SEM) analysis or microleakage trial at 48-hour and 3-month time periods. Results: SEM images showed the hybrid layer thickness, diameter, and length of resin tags of the self-etch adhesive (0.42 ± 0.14 ㎛; 1.49 ± 0.45 ㎛; 16.35 ± 14.26 ㎛) were smaller than those of the etch-and-rinse adhesive (4.39 ± 1.52 ㎛; 3.49 ± 1 ㎛; 52.81 ± 35.81 ㎛). In dentin, the microleakage scores of the 2 adhesives were not different in both time periods (48 hours/3 months). However, the microleakage score of etch-and-rinse adhesive increased significantly after 3 months (0.8 ± 0.63 and 1.9 ± 0.88, p < 0.05). Conclusions: The self-etch adhesive exhibited better long-term sealing ability in dentin when compared to that of the etch-and-rinse adhesive. The greater hybrid layer thickness and dimensions of resin tags did not guarantee reliable, long-lasting sealing in the bonding area.

• 한국식품조리과학회지
• /
• 제21권5호
• /
• pp.703-708
• /
• 2005

The purposes of this study were to establish washing conditions for vegetable salad to reduce the microbial hazard by using sodium hypochlorite solution and eventually to implement HACCP for salad processing. By using the salad production line of Shinkeum Co. located in Gwacheon, Gyunggi-do, salad samples were washed under several washing conditions (chlorine dip period, chlorine concentration, rinse time, etc.) to determine the most effective conditions. The original washing line consisted of 3 baths (100 ppm chlorine water dip, water rinse, and water rinse), each with a capacity of 100 L of tap water and 5 kg of salad. First, the salad samples were washed with 100 ppm of sodium hypochlorite solution for various dip times (3, 6, 9, 12 min); however, only a 1 log- or less-reduction in total microbial counts was achieved in all groups and the time of chlorine water dip was not a significant factor in reducing the microbial hazard. When another water bath was added before the chlorine water dip (4-bath washing), a 2 log-reduction in total microbial counts was achieved. This result suggested the importance of pre-dipping salad materials in water before chlorine treatment to reduce the organic load on the surface of the vegetables. Coliforms were not detected at all after washing. As the concentration of chlorine $(50{\sim}150\;ppm)$ and rinse time $(0.5{\sim}2\;min)$ increased, greater microbial reduction was achieved; however, physical damage of the salad was observed. Finally, the optimum washing conditions for salad were determined as 3 min-water dip, 3 min-chlorine (100 ppm) dip, 2 min-rinse, and 2 min-rinse.

• 한국패션뷰티학회지
• /
• 제4권3호
• /
• pp.13-17
• /
• 2006

Perm is one the of the most common thing in a beauty salon like hair-cut and hair perm needs processing solutions which is chemical substances. Those chemical substances damage the hair cuticle. Damaged hair cuticles with mistakes of perm will follow with the next performance and it will cause more damage to hair. As damage of hair cuticle become worse, it is harder to recover the hair cuticle like before. Therefore, this study shows that plain rinse is the way to reduce the damage of hair cuticle with perm as much as possible. With experiments, I suggest the right way to do plain rinse to satisfy customers' demand and reduce the damage. During the research, I figured that plain rinse with the knowledge, structure of hair cuticle, principle of perm and plain rinse, is very needed. The hair with plain rinse have more elastic curl and have less scales which came off from hair cuticle than the hair without plain rinse. This experiment concludes that hairdresser has to figure out about the time, temperature and type of water depends on the degree of damaged hair of customers. In order to perm, there is no way to not to use chemical substances to perm. Therefore, hairdresser has to choose suitable processing solutions and right steps, and as this is the age of 'well-being' boom, hairdresser must try to keep the healthy hair. Consequently, in order to meet the demands and conditions of customers, hairdresser needs to find the right method to do plain rinse and use the method in perm.

• Journal of Periodontal and Implant Science
• /
• 제47권3호
• /
• pp.134-142
• /
• 2017

Purpose: This study aimed to evaluate the effects of a cetylpyridinium chloride (CPC) and tranexamic acid (TXA) mouth rinse on patients with gingivitis. Methods: This randomized, placebo-controlled, double-blind, parallel-group, clinical trial included 45 healthy adults with gingivitis, who were randomized into 2 groups. The experimental group used a 0.05% CPC and 0.05% TXA mouth rinse, and the control group used a placebo mouth rinse. The following clinical indices were assessed at baseline, at 3 weeks, and at 6 weeks: the Turesky-Quigley-Hein plaque index (QHI), the $L{\ddot{o}}e-Silness$ gingival index (GI), and bleeding on marginal probing (BOMP). The subjects used the mouth rinse during the experimental period for 20 seconds, 4-5 times daily (10 mL each time). Results: There were no significant differences in the clinical indices between the groups at baseline. In the experimental group (CPC+TXA), a statistically significant improvement was evident in the QHI, GI, and BOMP at 3 and 6 weeks. These results were similar to those observed in the control group at 3 and 6 weeks, although the change in BOMP was not statistically significant in that group. At 6 weeks, the experimental group had a significantly lower mean score for the QHI than the control group. Conclusions: This study demonstrated that a CPC and TXA mouth rinse exhibited significant antiplaque and anti-gingivitis efficacy, and had a positive effect on bleeding control when used daily for 6 weeks.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권1호
• /
• pp.413-418
• /
• 2016

Objective: To assess the safety and effectiveness of a mouth-rinse with G-CSF (JiSaiXin, produced by NCPC Biotechnology Co., Ltd) in treating patients with chemotherapy-induced oral mucositis (CIM). Method: A consecutive cohort of patients with advanced cancers and CIM were treated with mouth-rinse G-CSF. All chemotherapy for patients with advanced cancers was adopted from regimens suggested by NCCN guidelines. The mouth-rinse with G-CSF at a dose of 150-300ug plus 100ml-500ml normal saline was started from the time of oral mucositis was confirmed and continuously used for at least 7 days as one course. After at least two courses of treatment, safety and efficacy were evaluated. Results: There were 7 female and 7 male patients with advanced cancer and CIM recruited into this study, including 5 with colorectal, 2 with lung, 1 patient with gastric, 1 with cervical and 1 with pancreatic cancer, as well as 2 patients with diffuse large B cell lymphomas, 1 with nasopharyngeal and 1 with gastric cancer. The median age was 57 (41-79) years. Grade 1 to 2 myelosuppression was observed in 3/14 patients, and Grade 4 myelosuppression in 1/14. Adverse effects on the gastrointestinal tract were documented in 5/14 patients, and were Grade 1 to Grade 3. No treatment related death was documented. Regarding CIM, the median response time to mouth rinse of G-CSF was 2 (1-5) days, and all patients with CIM demonstrated a positive response. Conclusions: Mouth-rinse with G-CSF proved to be safe and effective in treating patients with advanced cancers and CIM. However, further randomized controlled studies should be conducted to clarify the effectiveness of this treatment with other lesions.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.251-258
• /
• 2016

PURPOSE. This study was undertaken to investigate whether use of an adhesive penetration enhancer, dimethyl sulfoxide (DMSO), improves bond stability of fiber posts to root dentin using two two-step etch-and-rinse resin cements. MATERIALS AND METHODS. Forty human maxillary central incisor roots were randomly divided into 4 groups after endodontic treatment and post space preparation, based on the fiber post/cement used with and without DMSO pretreatment. Acid-etched root dentin was treated with 5% DMSO aqueous solution for 60 seconds or with distilled water (control) prior to the application of Excite DSC/Variolink II or One-Step Plus/Duolink for post cementation. After micro-slicing the bonded root dentin, push-out bond strength (P-OBS) test was performed immediately or after 1-year of water storage in each group. Data were analyzed using three-way ANOVA and Student's t-test (${\alpha}$=.05). RESULTS. A significant effect of time, DMSO treatment, and treatment${\times}$time interaction were observed (P<.001). DMSO did not affect immediate bonding of the two cements. Aging significantly reduced P-OBS in control groups (P<.001), while in DMSO-treated groups, no difference in P-OBS was observed after aging (P>.05). CONCLUSION. DMSO-wet bonding might be a beneficial method in preserving the stability of resin-dentin bond strength over time when fiber post is cemented with the tested etch-and-rinse adhesive cements.

• 폴리머
• /
• 제27권1호
• /
• pp.61-68
• /
• 2003

본 연구에서는 도금폐수 중 니켈이온의 분리 회수를 위한 혼성 이온교환체의 제조 및 흡착 특성을 확인하였다. 니켈 흡착량은 이온교환체의 혼합비에 큰 영향이 없었으며, 비드상 이온교환수지 양이 증가할수록 증가하였다. 또한 Langmuir와 Freundlich흡착 등온식이 직선성을 보였으며 이로부터 니켈의 이온교환 친화력이 큰 것을 확인하였다. 또한 충전방식에 따른 압력손실은 다단충전법에서 적층수가 많아질수록 작아졌고, 혼합충전법에서는 비드 이온교환수지의 양이 증가할수록 압력손실은 감소하였다. 한편, 연속식 흡착실험 결과 다단충전방식의 경우 적층수가 증가할수록 초기 파괴 시간은 짧아졌으며, 최종 파괴 시간은 거의 동일한 것으로 나타났다. 반면, 혼합충전방식의 경우 이온교환섬유의 양이 증가할수록 흡착파괴 시간이 짧았으며, 이때 최대 흡착량은 각각 2.51 meq/g과 2.69 meq/g이었다. 한편, 모든 이온 교환체의 흡착된 니켈이온의 탈착은 10분 이내에 98% 이상 탈착되었다.

• 폴리머
• /
• 제26권5호
• /
• pp.551-558
• /
• 2002

술폰산형 섬유이온교환체를 이용하여 도금 폐수 중 니켈 이온 분리를 위해 각각의 조건에 따른 니켈 이온에 대한 흡착 특성을 관찰하였다. 술폰산형 섬유이온교환체의 함수율은 술폰화도 극성이 클수록 크게 나타났으며 이온교환용량은 술폰화도가 증가함에 따라 증가하였으며 술폰화도 16%에서 3.38 meq/g로 높게 나타났다. 니켈이온의 흡착은 pH 변화에 따라 크게 변화하지 않았고 모든 흡착은 10분 이내에 약 7.5 mg/min의 흡착속도로 매우 빠르게 평형에 도달하였다. 재생 시 흡착용량은 7회까지 3.15 meq/g으로 거의 100% 가까이 탈착되었으며 그 이상에서는 2.01 meq/g으로 약간 감소하는 것으로 보아 본 연구에 사용한 이온교환체는 내구성에 문제가 없는 것으로 판단되었다. 한편 흡착평형 시간은 L/D의 값이 증가함에 따라 선형적으로 증가하였으며, 최대 흡착용량은 각각 2.71∼3.01 meq/g으로 약간 증가하였고 L/D의 변화에 크게 영향이 없는 것으로 보아 L/D<2로 흡착칼럼의 설계가 가능할 것으로 사료되었다. 또한 이온교환 섬유의 충전비가 일정할 때 pH 변화에 따른 니켈 이온의 흡착량은 산성 pH에서는 큰 변화가 없는 것으로 보아 도금수세액의 pH가 산성인 점을 고려할 때 pH 5 이하가 적합한 것으로 판단되었다.