• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5B
• /
• pp.409-417
• /
• 2009

In this study it was assessed the accuracy of the Chukwooki rainfall data in Seoul by comparing with tree-ring width index data, sunspot numbers, southern oscillation index (SOI) and global temperature anomaly. And it was investigated the correlations of climatic change and change characteristics in past north-east asia by comparisons of tree-ring width index data in near Korea. The results of this study shows that Chukwooki rainfall data has the strong reliance since the trends and depths of change are very well matched with other comparative data. And with the results by compared with tree-ring width index data in six sites of near Korea, climates of north-east asia are changed with strong correlations as being temporal and spatial and longterm periodic possibility of reproducing are exist on those changes. However characteristics of climate change post 1960 A.D. are investigated as represented differently to past although statistical moving characteristics or changing criterion are within the limitations of reproducing phase in the past since they represent the different trends and irregularity and their frequencies are increase. The results of this study are widely used on long-term forecasting for climate change in north-east asia.

• Journal of the Korea Furniture Society
• /
• v.17 no.4
• /
• pp.109-114
• /
• 2006

An investigation was carried out for the annual ring width, longitudinal tracheid diameter and wall thickness in different tree heights for Pinus koraiensis Sieb. et. Zucc. The annual ring width increased along with the tree height, however the tracheid diameter and wall thickness decreased with the tree height. Tracheid wall thickness was found the thickest at 2.0m from the above ground samples and it increased gradually from pith to bark. Radial tracheid diameter was found to be larger than that of tangential tracheid diameter in earlywood. But, it was found to be the opposite in latewood. In earlywood, the average values of tracheid wall thickness was found the range of $2.1-3.0{\mu}m$, whereas, in latewood, it was $2.4-4.2{\mu}m$.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.1-6
• /
• 1981

This study examined the radial variations in element demensions of mongolian oak (Quercus mongolica.), elm (Ulmus japonica.), maackia(Maackia amurensis.), castor aralia (Kalopanax pictus.) from pith outwards. Disks were cut from the d.b.h.(above 1.2m) of each species and specimen for tangential pore diameters, fiber length, ray height and width were taken from 1-3rd, 5th, 10th, 15th.............40th ring number from pith. The tangential pore diameters in the earlywood increased rapidly near the pith and then maintained almost constant or very gradually increased diameters in about 20th-30th ring number from pith. In the latewood, tangential pore diameters gradually increased from pith to outwards though the increment is smaller than in early wood. Radial variations of ray height and width maintained almost constant, gradually increased or rapidly increased diameters and then maintained almost constant from pith to outwards. Patterns of radial variations in the fiber length were almost coincident with patterns of earlywood pore diameters, and of ray height or width in Ulmus japonica and Maackia amurensis.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.773-779
• /
• 2013

We propose an efficient method to measure a pulse width using multiphase clock signals generated from a ring oscillator. These clocks, which have the same frequency and are evenly spaced, give multiple rising edges within a clock cycle. Thus, it is possible to measure a pulse width more accurately than with existing single clock-based methods. The proposed method is applied to a capacitive touch switch. Experimental results show that the capacitive touch switch with the proposed method gives a 118 fF resolution, which is 6.4 times higher than that of the touch switch with a single clock-based pulse width measurement method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.682-684
• /
• 2004

The effect of 1/f noise by the random telegraph signal(RTS) on the phase noise and the jitter of CMOS ring Oscillator is investigated. 10 parallel piece-wise-linear current sources connected to each node model the RTS signals. The In, the power spectral density and the jitter of output of the ring oscillator are simulated as functions of the amplitude and time constant of RTS current source. It is confirmed that the increase of amplitude of RTS is directly related to the increase of the width of phase noise md the value of jitter. The shorter the time constant is, the wider width of FET peak and the larger value of cycle to cycle jitter are.

• Geomechanics and Engineering
• /
• v.34 no.1
• /
• pp.103-113
• /
• 2023

This study focused on understanding the relationship between the design of a tunnel boring machine disc cutter ring and its rock-breaking efficiency, as well as the applicable conditions of different cutter ring types. The discrete element method was used to establish a numerical model of the rock-breaking process using disc cutters with different ring types to reveal the development of rock damage cracks and variation in cutter penetration load. The calculation results indicate that a sharp-edged (V-shaped) disc cutter penetrates a rock mass to a given depth with the lowest load, resulting in more intermediate cracks and few lateral cracks, which leads to difficulty in crack combination. Furthermore, the poor wear resistance of a conventional V-shaped cutter can lead to an exponential increase in the penetration load after cutter ring wear. In contrast, constant-cross-section (CCS) disc cutters have the highest quantity of crack extensions after penetrating rock, but also require the highest penetration loads. An arch-edged (U-shaped) disc cutter is more moderate than the aforementioned types with sufficient intermediate and lateral crack propagation after cutting into rock under a suitable penetration load. Additionally, we found that the cutter ring wedge angle and edge width heavily influence cutter rock-breaking efficiency and that a disc cutter with a 16 to 22 mm edge width and 20° to 30° wedge angle exhibits high performance. Compared to V-shaped and U-shaped cutters, the CCS cutter is more suitable for soft or medium-strength rocks, where the penetration load is relatively small. Additionally, two typical case studies were selected to verify that replacing a CCS cutter with a U-shaped or optimized V-shaped disc cutter can increase cutting efficiency when encountering hard rocks.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.58-65
• /
• 1995

The possibilities of the estimation of the moisture content(MC) for sitka-spruce (Picea sitchensis Carr.) by measuring density have been investigated. The method is based on the relationships between the wood density and moisture content of wood expressed by Equations (8)~(9). The purpose of this study is examining the estimation of the moisture content of wood by density and the variation of moisture content with annual ring width of wood. The following conclusions were obtained; 1. This method is very convenience because of the average moisture content of wood can be obtained by a simple estimation. This estimation can be made from the easy measurement of the weight and volume of wood. 2. Coefficient of determination between the experimental MCs and theoretical MCs which is calculated by the oven-dry densities of each specimens and Equations (8), (9) is 0.98. This Correlation is very remarkable. Therefore the model Equations on the estimation of moisture content by wood density was available. 3. Relationship between experimental MCs and theoretical MCs which is estimated by average oven-dry density of total specimens showed positive correlation(Fig.2). But from the Fig.4. we can concluded that the number of specimens is two groups. This phenomenon is considered that the variation of MC by the annual ring width from the specimens' observations. Consequently, the MCs of wood by density, is likely to be successful method. can be estimate using by the average oven-dry densities divided with the annual ring widths of wood.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.17-23
• /
• 2005

European maple is famous for the optimum solid wood for making bridge which is the most important part in violin acoustics. This study was carried out to investigate the variation of main features, i. e. annual ring width and cutting direction of costly imported violin bridge blanks and to examine the effect of these features of the blanks on the vibrational characteristics of bridge blanks. Imported violin bridge blanks had somewhat large variation in major macroscopical and physical properties and there was little relationship between annual ring density and weight of maple blanks. Resonant frequency of violin bridge blanks had some positive correlation with weight, however, damping having negative relationship with frequency was seldom affected by any physical properties of the maple blanks. Deviation from the radial cutting of tail side(ray direction from top toward feet on the edge of bridge blank) lowered the resonant frequency. Consequently, weight and ray direction should be taken for the critical quality decisive factors(QDF) of incoming bridge blanks by not only inspectors also luthiers who tune the bridge by shaping and are responsible for the final timbre quality of this complicate instrument.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.208-213
• /
• 2009

본 논문에서는 Tree-ring width 지표자료, 태양흑점수, 남방진동지수(SOI) 및 지구온도 아노말리 자료와의 비교를 통하여 서울지점 측우기 강우량 자료의 정확도를 가늠해 보았다. 그리고 한반도 인근지역의 Tree-ring width 지표자료와의 비교를 통하여 과거 동북아시아 기후변화 상관성과 변화특성을 파악해 보았다. 분석 결과 측우기 강우량 자료는 다른 비교분석 대상 자료들과 경향성과 변화심도가 매우 잘 일치하고 있어 상당한 신뢰성을 가지고 있음이 확인되었다. 그리고 한반도 주변 6개 지점의 Tree-ring width 지표자료와의 비교분석결과, 장기적으로 동북아시아 기후는 시공간적으로 밀접한 상관을 가지고 변화하고 있으며 그 변화에는 장주기적인 재현성이 존재한다는 점을 알 수 있었다. 그러나 1960년 이후의 기후변화 특성은 통계적인 거동특성이나 변화폭이 과거의 재현사상의 한계를 넘지는 않으나 과거와는 다른 경향성과 불규칙성을 보여주고 있으며 재현주기도 짧아지고 있어 과거와는 다르게 나타나는 것으로 분석되었다. 과거자료에 근거한 본 연구의 결과는 동북아시아 기후변화 장기 예측에 있어 유용하게 이용될 수 있을 것으로 판단된다.

• Transactions of Materials Processing
• /
• v.18 no.6
• /
• pp.465-470
• /
• 2009

The frictional behaviors of Cermets/Cr-Ceramics and Cu-Al coatings of piston ring were investigated. Friction tests were carried out by pin-on-disk test and materials properties of coating layer were analyzed by nano indentation tester. The effect of surface roughness of cylinder liner on the friction coefficient was analyzed. This study provided tribological data of hard and soft piston ring coatings against cylinder liner. The surface roughness does exert an influence on the average friction coefficient, with smoother surfaces generally yielding lower friction coefficients. In case of hard-coating, the scratch depth, width and pile-up height had close relationship with hardness. So the scratch width, depth and pile-up height increases with decreasing friction coefficient. But in case of soft-coating, the friction coefficients are strongly dependent on the morphological characteristics such as, scratch depth, width, pile-up height and elastic modulus.