• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.581-590
• /
• 2011

Since ultra-high performance cementitious composites (UHPCC) not only represents high early age shrinkage strain due to its low water-to-binder ratio (W/B) and high fineness admixture usage but also reduces the cross section of structure from the higher mechanical properties, it generally has more shrinkage cracks from the restraints of formwork and reinforcing bars. In this study, free and restrained shrinkage experiments were conducted to evaluate the suitability of incorporating both expansive admixture (EA) and shrinkage reducing agent (SRA). The test results indi-cated that approximately 40~44% of free shrinkage strain was decreased. Also, the results showed that 35% and 47% of residual tensile stresses were relieved by synergetic effect of SRA and EA, respectively. Residual tensile stresses from ringtest were relaxed by approximately 61% and 64% of elastic shrinkage stresses due to SRA and EA, respectively, because of the tensile creep effect. Therefore, the creep effect should be considered to precisely estimate the restrained shrinkage behavior of concrete structures. The degree of restraint of UHPCC was approximately in the range of 0.78~0.85. The addition of combined EA and SRA showed minute influence on the degree of restraint. However, the effect decreased when thicker concrete ring was used. Tensile creep strains were measured and compared to the predicted values from 4-parametric prediction model considering time dependent restrained forces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.473-480
• /
• 2004

Recently, they are interested in the relation between night's vehicle accidents of drivers and the dynamic visual acuity at home and aboard. So, in this research, we tried to design an optical system of the inspection equipment to measure the dynamic visual acuity. A optotype standard did to Landolt's ring with 45mm of diameter and 9mm of gap to maintain the visual acuity of 1.0 in the 30m distance. An optical structure of the inspection equipment was composed of the sequence of an observer, a plus refraction lens system, a minus refraction lens system, and an optotype that was arranged to have characteristics that the size of the first virtual image of the optotype made by the minus refraction lens system grows bigger gradually according to the optotype movement to near distance from far distance, and also the first virtual image moves to the principle plane from the focal point of the plus refraction lens system as the size of the first virtual image arranged to the inside of focal distance of plus refraction lens system grows bigger gradually. As doing these processes, we completed the optical system of which characteristic is that the position of the final second virtual image moves to 3m from 50m as the size of the second virtual image made by the plus refraction lens system maintains to be regular.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.2
• /
• pp.146-157
• /
• 1994

Wasong(Orostachys japonicus A. Berger) has been used as anti-cancer medicinal plants from ancient time. This experiment was conducted to obtain some fundamental informations concerning anatomical study, germination test, soil analysis of indigenious districks, adaptaion of soil for wasong. The leaf of wasong was xerotype with spine, mesophyl chloroplast is dense surrounded vascular bundle, with a many large water storage tissue without chloroplast, and was bifacial stomata leaf type. The stem of wasong was amphicribral vascular bundle, central cylinder was cylinder type and protostele. Root was polarch type, potoxylem of it's was arranged in ring shape of annulation and metaxylem. The structure of flower was cymose, was caylyx of 5 sepals, corolla of 5 petals, roecium of 10 stames, ovules of five, placentation parietal, ovary superior, axile placenta. The optimum temperature for seed germination was $25^{\circ}C$ under light and germination percentage was 22.5%. Dormancy breaking was effective for 6-8 days at 5$^{\circ}C$ and at 100 ppm level of $GA_3$ The soil analysis of wasong local districks, content of available $P_2O_5$, Ca were higer than optimal level of upland and C.E.C., exchangeable k was not significantly different of that, but exchangeable magnesium was very low. The growth of wasong was affected draining regardless soil combination treatment.

• Journal of the Korean Professional Engineers Association
• /
• v.16 no.1
• /
• pp.20-34
• /
• 1983

A phenomenon in the unplanned urban sprawl of Cheong-ju city has to be rest-rained from disposing and to develop, though progress in urbanization inevitably decreases rural area. So, this thesis aims at reviewing, revising and guiding toward the more effective land use planning practice and zoning mechanism and system of Cheong-ju city. I proposed that land use planning should be had several factors and thereupon that Korean zoning mechanism and system including Building Code should be amended because of inducing human activities in buildings and facilities not to demarcate and plan every one of them. First, the factors of urban planning are a rather diversified approach to it than a unified, supplementation of the applicable difference in time between preparing and appling it, a solid controlling system, a micro and macro planning theory and giving serious consideration for the inertia from the existing land use. Second, the applicable amendments for our zoning mechanism including Eluding Code are as follows; a need of reorganization for Zoning Ordinance appricated to different regulation concerning a scale and peculiarity of a oily, a decision of the different earmarked confinement in area to different zone ana from Zoning Ordinance in City Planning Law, a demarcated facilities and the more detailed land use concerning human activies than the exsisting and entrusting decision on the ways and processes of it to every rural city planning committee, a settlement of zone ana area considering for block-unit and Planned Unit Development(P. U. D.), and a need of security jurisprudence in order to solve the zoning regulation rather in City Planning Law than in Building Code that our zoning regulation and controlling system are depended on. According to these applicable amendments to Cheong-ju city, I proposed the conceptions of Cheong-ju city land use planning are as follows; a reinforcement with one cored pattern of urban land use, a selection of gradual urban sprawl by way of city development and renewal, a strengthening accessibility to the core of the city with Plurizing the system of arterial roads, a choice of priority to conservation at the core of tile city and security of open spaces and parking area at the area of the city, a harmonization between development and conservation at the inner ring area that is situated between the core and periphery reserved area in order to develop in the future, a buffered open space situated at the congested area with heterogenous functions, and a completion of urban open space system. The proposal made here so far is for the hope of the better structure of Cheong-ju city that should be granted to the peculiarity developed with educational, cultural, conservative and self-sufficient city functions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.72-81
• /
• 2001

Dendroaspis natriuretic peptide (DNP), recently isolated from the venom of the green Mamba snake Dendroaspis angusticeps, is a 38-amino acid peptide containing a 17-amino acid disulfide ring structure similar to that of the natriuretic peptide family. The natriuretic peptide family was known to induce histamine release from human and rat mast cells, but there are no published data concerning the effects of DNP on histamine release from mast cells. The purpose of this study is to investigate whether DNP induces the histamine release from rat peritoneal mast cells (RMPCs) and to determine the mechanism of DNP-induced histamine release from RPMCs. After treatment of the various doses of DNP in RPMCs, the mast cell degranulation was observed with inverted microscopy and the histamine release was measured by radio-enzymatic assay. Calcium uptake and intracellular cyclic GMP level were measured by radioimmunoassays. DNP induced the mast cell degranulation. DNP released the histamine and increased the calcium uptake and the level of intracellular cyclic GMP of RPMCs, in a dose-dependent manner. The results indicate that DNP is capable of inducing histamine release from RPMCs by increasing of calcium uptake and intracellular cyclic GMP level.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.27-34
• /
• 2016

In the train system, railway vehicles are connected in a line. Therefore, this feature should be considered in composing network topology in a train system. Besides, inter-car communication should be distinguished from in-car communication. As for the inter-car communication, the hybrid topology was proposed to use rather than the conventional ring, star, daisy-chain, and bus topologies. In the hybrid topology, a number of cars are bound to be a group. Then star topology is used for the communication in a group and daisy-chain topology is used for the communication between groups. Hybrid topology takes the virtue of both star and daisy-chain topologies. Hence it maintains communication speed with reducing the number of connecting cables between cars. Therefore, it is important to choose the number of cars in a group to obtain higher performance. In this paper, we focus on the optimization of hybrid topology for railway cars. We first assume that the size of data and the frequency of data production for each car is identical. We also assume that the importance for the maximum number of cables to connect cars is variable as well as the importance of the communication speed. Separated weights are granted to both importance and we derive the optimum number of cars in a group for various number of cars and weights.

• Journal of the Korean Chemical Society
• /
• v.38 no.5
• /
• pp.359-365
• /
• 1994

The crystal stucture of hexapotassium undecahydrogen tetratungsto hexaantimonate(V) tetrahydrate has been determined from single crystal X-ray diffraction data. Crystal data are as follows: $K_6H_{12}[Sb_6W_4O_{36}]{\cdot}4H_2O$, Fw = 2360.62, tetragonal, I$4_1$/a, a = 10.799(1) ${\AA}$, c = 35.244(5) ${\AA}$, V = 4110.1(7) ${\AA}^3$, Z = 4, $D_x$ = 3.82 g$cm^{-3}$, $\mu(MoK\alpha)$ = 160.15 $cm^{-1}$, T = 293 K, final R = 0.0356 for 2400($F_0 > 3\sigma(F_0))$ independent reflections. The $[H_{12}Sb_6W_4O_{36}]^{-6}$ polyanion independently consists of one tungsten, two antimony, and nine oxygen atoms and belongs to the $\bar4(S_4)$ point group. This polyanion is formed by two open octahedra five membered ring of Sb(3)$O_6-W(1)O_6-Sb(2)O_6-W(1)O_6-Sb(3)O_6$ which is connected at right angle. The Sb-W, Sb-O, and W-O bond distances range from 3.2304(9) to 3.2403(5) $\AA$, 1.745(8) to 2.334(6) $\AA$, and 1.914(7) to 2.039(7) $\AA$, respectively.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.11-21
• /
• 1996

This study has observed the development, structure and distribution of oil canals in mitsuba, seri, ashitaba and hamabohu, that are condiment herbs belonging to the Umbelliferae family, using a light microscope. Oil canals were found in the petioles, leaf blades, stems, roots, hypocotyls and cotyledons. Oil classified into distribution due to ring vascular bundles, as in mitsuba and seri, and distribution due to diffuse vascular bundles, as in ashitaba and hamabohu. Oil canal development in the cortex due to petiole thickening was followed by the development of collenchyma and vascular bundles. However, no vascular bundles were formed in some cases. Many oil canals were found in the periphery of the petioles. Oil canals in leaf blades were found on the adaxial and abaxial sides on the veins. Those around the main veins were larger. Steam oil canals were found in the cortex and pith in mitsuba and seri, and in the cortex and fundamental tissues around the xylem, in ashitaba and hamabohu, while those in the roots were found in the pericycle in mitsuba and seri, and in the collenchyma-like tissues and phloem in ashitaba and hamabohu. The transverse sections of oil canals were round or elliptical. The secretory cells in the cortex and pith were smaller than the neighboring parenchyma cells, while they were larger than the neighboring parenchyma cells in the phloem.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.