• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.107-115
• /
• 1999

Hydrocarbon emission from spark ignition engines deeply relates with fuel evaporation mechanism. Therefore, fuel evaporation on the back of the intake valve is very important to understand fuel evaporation mechanism during engine warm up period. Intake valve heat transfer model was build up to estimate the amount of fuel evaporation on the intake valve back . Intake valve temperature was measured intake valve temperature is increased rapidly during few seconds right after engine start up and it takes an important role on fuel evaporation. The liquid fuel evaporation rate on the intake valve back proportionally increases as valve temperature increases, however its contribution slightly decreases as intake port wall temperature increases. The fuel evaporation rate on the valve back is about 40∼60% during engine warm-up period and it becomes about 20∼30% as intake port wall temperature increases. The estimation model also makes possible model also makes possible to review the effect of valve design parameters such as the valve mass and seat area on fuel evaporation rate through intake valve heat transfer.

• 무역상무연구
• /
• 제61권
• /
• pp.29-55
• /
• 2014

Subject matter of international trade are various. They contain not only tangible assets such as goods but also intangible assets including service, technology, and capital etc. Technology, a creation of the human intellect, is important as it is the main creative power to produce goods. It can be divided into Patent, Trademark, Know-how and so on. These Technologies are protected by the national and international laws on regulations for the Intellectual Property Rights(IPR), since technology development is needed a lot of time and effort, and the owner of the technology may have crucial benefits for creating and delivering better goods and services to users and customers. Therefore, any licensee who wants to use the technology which other person(licensor) owns, he(the licensee) and the original owner(the licensor) shall make Technology Transfer Contract. Differently from the International Sales Contract in which seller provides the proprietary rights of goods for buyer, in the case of International Transfer of Technology Contract, the licensor doesn't provide proprietary rights of technologies with the licensee, on the contrary the right of using is only allowed during the contract. The purpose of this paper is to examine the main issues in International Transfer of Technology Contract. This author focused on the main obligations of both parties, namely licensor's obligation to provide the technology and licensee's obligation to pay the royalty. As every country has different local mandatory laws about Intellectual Property Rights(IPR) and these mandatory rules and laws prevails over the contract, the related rules and laws should be examined carefully by both parties in advance. Especially the rules and laws about the competition limitation in the local country of licensee and the economic union(like the EU) should be checked before contracting. In addition, the contract has much more complicate and delicate aspects than other international business contracts, so both parties should review carefully before singing the contract.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.85-91
• /
• 2013

It is essential to reduce the amount of fossil fuel because facing with the natural problem such as a global warming. To achieve this goal, many of interests in the use of renewable energy is growing. Especially, as one of these renewable energy systems, a solar air heater invention has been conducted for enhancing the efficiency of solar air heater. According to this trend, scale-down sized experiment apparatus was constructed and performed for searching a proper fin and confirming the heat transfer performance by fin shape on constant heat condition to enhance efficiency of solar air heater. In this experiment, heat gain, convection heat transfer coefficient, number of transfer units, Nusselt number, Reynold's number, friction factor, performance factor were investigated in order to evaluate the thermal characteristics based on the real data obtained. By comparison with the each fin performance, a zigzag shape keeping a right angle to the plate had the highest value among them.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.185-204
• /
• 2003

The purpose of this study was to obtain the data for stable and accurate techniques of the free throw in basketball. The subjects of this study were seven male basketball player consisted of college students athletes. Free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. The variables were the velocity, the angular velocity of the upper extremity segments, degree, and angular momentum. The result of analysis is summarized as follows. 1. The velocity and angular velocity of the upper extremity segment was showed an gradual increase and a smooth velocity transfer, transferring from proximal segment to distal segment at free throw motion in basketball. 2. The local term and remote term angular velocity momentum of the proximal segment showed larger than that of the distal segment in X, Y, Z axis component all. 3. The remote term angular momentum was showed larger than that of the local term angular momentum in X, Y, Z axis component all. 4. The angular motion of the upper trunk and upper arm, upper arm and forearm was showed in opposite direction and symmetrical angular momentum in local term angular momentum of the Y and Z axis component. 5. All the segments of upper extremity segment was showed left rotation in remote term angular momentum of the Y axis component and right rotation in remote term angular momentum of the Z axis component.

• 설비공학논문집
• /
• 제12권9호
• /
• pp.802-809
• /
• 2000

This study numerically analyzes the thermal and flow characteristics inside the header in PFHE(parallel-flow heat exchanger) by employing a three-dimensional turbulence modeling. The following quantities are examined by varying the injection angle of the working fluid, the location of entrance and the shape of entrance: flow nonuniformity, heat transfer rate, and flow distribution in each passage. The result shows that the degree of significance among the parameters affecting the header part is in the order of the injection angle, the shape of entrance, and the location of entrance. The result also indicates that heat transfer rates compared to the reference model are increased by about 152% for the angle of injection of -$20^{\circ}C$, by about 127% for the shape of entrance with right and left long rectangular form, and by about 108% for the location of entrance located at the lowest Position.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.199-204
• /
• 2001

This paper showed the study on the heat transfer into space by the aspect ratio of solar concentration absorber, and the purpose of this study is to obtain the optimum aspect ratio and tilt angle. The boundary conditions of a numerical model were assumed as follows : (1) The heat source is located at the center of absorber. (2) The bottom was is opened and adiabatic. (3) The top, right and left walls are cooled wall. The parameters for the study are the tilt angles and the aspect ratio. The velocity vectors and isotherms were dense at wall side and the heat source. The mean Nusselt number had a maximum value at Ar=1:1 and $\theta=0^{\circ}$ and showed a low value as the tilt angles were increased.

• 동력기계공학회지
• /
• 제6권1호
• /
• pp.43-49
• /
• 2002

This paper showed the study on the heat transfer into space by the aspect ratio of solar concentration absorber, and the purpose of this study was to obtain the optimum aspect ratio and tilt angle. The boundary conditions of a numerical model are assumed as follows : (1) The heat source is located at the center of absorber. (2) The bottom wall is opened and adiabatic. (3) The top, right and left walls are cooled wall. The parameters for the study are the tilt angles and the aspect ratio. The velocity vectors and isotherms were dense at wall side and the heat source. The mean Nusselt number had a maximum value at Ar=1:1 and ${\theta}=0^{\circ}$ and showed a low value as the tilt angles were increased.

• 한국수정란이식학회지
• /
• 제17권1호
• /
• pp.33-44
• /
• 2002

본 연구는 기존의 수정란 이식기술을 다각적으로 분석하고 개선하여 한우 체내수정란의 생산 및 이식기술 체계를 확립하기 위하여 수행하였다 수정란의 생산 및 이식은 농협중앙회 가축개량사업소 한우개량부에서 사육하고 있는 공란우 232두와 수란우 434두를 이용하여 실시하였다. 본 연구에서 얻어진 결과를 요약하면 다음과 같다. 1. 수란우의 황체 위치와 등급에 따라 수정란이식을 실시한 결과는 오른쪽 난소의 A등급 황체, 왼쪽 난소의 B등급 황체가 존재할 경우가 유의적(P<0.1)으로 높은 수태율을 나타냈다. 2. 동결수정란을 이식했을 때의 수태율을 35.0% 로서 신선수정란의 수태율 56.2%에 비하여 유의(P<0.01)하게 낮았다. 3. 수란우의 발정일차(6.0∼9.0일)에 따라 수정란을 이식한 격과는 신선수정란에서 45.4∼65.7%, 동결수정란에서 22.0∼50.0%의 임신율을 나타내서 처리간에 유의성이 인정되지 않았다. 4. 수란우의 황체등급과 수정란의 동결 여부에 따른 임신율을 신선 및 동결수정란 모두에서 A등급의 황체일 경우가 40.8∼67.9%로 B 및 C등급 황체의 25.0∼56.0%보다 양호할 성적을 나타냈다. 5. 수정란의 발육단계 및 등급에 따라서 이식한 결과는 상실배의 이식이 수정란의 등급에 관계없이 평균 46.3%의 임신율을 나타내 어서 배반포배 이식의 34.1%보다 높게 나타났다.

• The Journal of Korean Physical Therapy
• /
• 제11권2호
• /
• pp.111-114
• /
• 1999

Some hemiplegic patients show a particular posture that pushing away from the nonaffected side of the body. A few study has been conducted of any aspect of this syndrome. But despite the lack of a scientific basis, this term is widely used in the physical therapy of hemiplegic patients. The purposes of this study was to investigate whether pusher syndrome has an adverse impact on functional outcome. Included were all acute stroke patients admitted in a months period a hospital in Seoul. The presence of pusher syndrome was assessed by a Bobath trained physical therapist. The ability of transfer was assessed by the Functional Independence Measure(FIM), Activities of daily living by the Modified Barthel Index(MBI), and standing balance by Bohannon's Standing Balance Scale(BSBS) on admission, weekly during the hospital stay, and at discharge. Pusher syndrome was found in $52.4\%$ of the left side and $50.0\%$ of the right aide hemiplegic patients. Significant differences were found in the score of transfer, ADL and standing balance between patients with and without pusher syndrome.

• 대한수의학회지
• /
• 제29권1호
• /
• pp.61-68
• /
• 1989

This study was carried out to determine suitable selection factors for recipients and embryos which could improve pregnancy rates following bovine embryo transfer. The experiment included 52 surgical transfers from February, 1985 through June, 1986 performed on Kyungpook Breeding Center in southern Korea. The pregnancy rate was highest when recipients were in estrus within 6 hours before the donor to 12 hours after the donor (78.3% versus 50% for recipients in estrus earlier or later). Pregnancy rates were acceptable following culture under field conditions for up to 17 hours. More recipients over 15 months of age (76.1%) remained pregnant than those under 15 months (66.7%). Embryos transferred during the months from February to July resulted in higher pregnancy rates than those transferred during the remaining 6 months (77.3% versus 57.1%). Transferrable embryos were classified A (best) to C (worst); those graded A or B resulted in significantly higher pregnancy rates than those graded C (81.8% and 73.3% versus 25.0%, p<.05). Pregnancy rates among recipients of the Korean native breed tended to be higher than among Holstein recipients (100% versus 71.1%). Similarly, when the embryo was transferred to the right uterine horn, pregnancy rates tended to be higher than when it was transferred to the left (81.3% versus 65%). Pregnancy rates did not differ according to the stage of development of the embryo; they were for morulae, tight morulae, blastocysts, and advanced blastocysts, respectively: 75.0%, 66.7%, 75.0%, and 77.4%.