• 한국화재소방학회논문지
• /
• 제16권4호
• /
• pp.33-43
• /
• 2002

선박기관실과 유사한 공간내로 $CO_2$소화제를 분사했을 때 화재화염이 공기유동 및 $CO_2$소화제전달 특성에 미치는 영향을 분석하기 위하여 수치해석을 수행하였다. 노즐 위치에 따라 유동장과 $CO_2$농도장을 계산하였다. 한 경우를 제외한 모든 경우에서 시계방향과 반시계방향 재순환 유동이 노즐 좌, 우측영역에 형성되었으며, 이러한 재순환 유동이 질량전달과 $CO_2$소화제 확산경로에 큰 영향을 미치는 것을 알 수 있었다. 화재화염이 위치한 1층 영역에서는 $CO_2$소화제 확산경로가 재순환 유동 확장경로와 일치하였다.

• 대한지리학회지
• /
• 제47권2호
• /
• pp.245-267
• /
• 2012

이 논문은 공익명분에 입각한 공용수용 방식을 통해서 시행하는 미국 도시재생사업에서 사유재산권의 차별화를 분석한다. 도시재생사업이 강력한 수용방식을 활용하는 사업임에도 불구하고 실제로는 사회적 약자로부터 대자본 또는 민간개발업자에게 재산권을 이전시키는 재산권 차별화와 희생과정임을 밝힌다. 먼저 도시재생에 대해 다양한 학문적 관점에서 연구동향을 검토하고, 새로운 연구방향으로서 법제지리학적 관점을 제시한다. 다음으로 환경보호청과 회계검사원 자료를 통해 미국에서 이들 사업대상 지구의 규모를 추정하며, 이들을 탈공업화와 교외화의 유산으로 파악한다. 다음으로 사유재산권의 차별화 과정은 미국 연방대법원의 공적소유개념에서 경제적 공익개념으로의 공익개념 확장 과정, 공용수용의 민영화 과정, 개발주의 성장연합체제와 대자본 편향 및 인종 계층적 편견, 신자유주의적 재산권운동 등이 복합적으로 작용하여 발생하는 결과라는 것을 밝힌다.

• 한국콘텐츠학회논문지
• /
• 제12권8호
• /
• pp.198-206
• /
• 2012

주택임대차보호법 제4차 개정에서 신설한 임차권등기명령제도는 임대차기간이 만료 후 보증금을 반환받지 못한 임차인에게 임차주택에 임차권등기를 마치면 종전의 대항력과 우선변제권을 그대로 유지되며, 임차권등기 이후에는 주택임대차보호법 제3조 제1항의 대항요건을 상실하더라도 이미 취득한 대항력과 우선변제권을 상실하지 않는 것으로 정하고 있다. 따라서 임차인은 안심하고 자유롭게 주거를 이전할 수 있어 사회 경제적 약자인 임차인의 권익보호에 중점을 두고 있다. 그러나 현실에서는 고액의 임차보증금을 반환받지 못하여 자유롭게 주거를 이전할 수 없는 임차인들이 대부분이고, 어쩔 수 없이 임차권등기명령에 의한 임차권등기를 마쳐서 이주를 하였다 하더라도 빠른 시일내에 임차보증금을 반환받지 못하는 등 여러 가지 문제점이 있는 바 이에 대한 개선방안을 본 연구에서 제시하고자 한다.

• 한국수정란이식학회지
• /
• 제13권1호
• /
• pp.61-67
• /
• 1998

This study was carried out to establish an effective system for embryo transfer techniques by analyzing several factors affecting in-vivo embryo transfer in Korean cattle. Embryos produced in-vivo were transferred into a total of 301 recipients The results obtained in studies on the factors affacting pregnancy rate after embryo transfer by condition of recipients were as follows ; 1. The pregnancy rate by age and parity of recipients showed high in 5~8 and over 12 years old(72.7~73.9%), and 3rd~4th parity(82.1%) for fresh embryos(P<0.05). The pregnancy rate did not differ by age and parity of recipients in frozen embryos. The pregnancy rate of frozen embryos tended to be similar to that of fresh embryos(38.5% and 25.0~36.7%). 2. The number of observation for normal estrus cycles of recipients did not differ In pregnancy rate between one and 2 times in fresh embryos(64.9%, 69.8%). The pregnancy rate by transferred frozen embryos showed significantly higher after 2 times of observation(P<0.05, 16.3%, 37.5%). The pregnancy rate by days open did not differ between fresh and frozen embryos. But the pregnancy rate was slightly higher in 12 months and 6 months of days open for fresh and frozen embryos, respectively(70.1~71.1% and 24.5%, respectively). 3. The pregnancy rate of transferred fresh and frozen embryos into right and left side of uterine horn did not differ(62.1% : 65.9% 25.0% : 24.3%, respectively). The pregnancy rate by the grade of CL was not different in fresh embryos, but the pregnancy rate was significantly higher in the grade A than B for frozen embryos(P<0.01, 43.2%, 16.2%).

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1192-1198
• /
• 2004

Hole transporting polymer(poly［N-(p-diphenylamine)phenylmethacrylamide］, PDPMA) was doped with nile red dye at various concentrations to study the influence of doping on the energy transfer during light emitting processes. Organic LEDs composed of ITO/blend(PDPMA -nile red)/ Alq$_3$/Al as well as thin films of blend(PDPMA -nile red)/ Alq$_3$ were manufactured for investigating photoluminescence, electroluminescence, and current-voltage characteristics. Atomic Force Microscopy was also used to observe surface morphology of the blend films. It was found that such doping. significantly influences the efficiency of the energy transfer from the Alq$_3$ layer to blended layer and the optical/electrical properties could be optimized by choosing the right concentration of the dye molecule. The results also showed a interesting correlation with the morphological aspect, i.e. the optimum luminescence at the concentration with the least surface roughness. When the concentration of nile red was 0.8 wt%, the maximum energy transfer could be achieved.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 1999년도 추계학술대회-지능형 정보기술과 미래조직 Information Technology and Future Organization
• /
• pp.111-120
• /
• 1999

Although the concept of viewing knowledge as a critical resource has been widely accepted in prior studies, it is not fully understood how to acquire available knowledge in order to improve organizational effectiveness. However, it si sure that organizational knowledge management should pursuit the achievement of the business goal by delivering relevant and useful information to the right person at the right time. Group Support System (GSS) can play an important role to transfer scatter information into meaningful business knowledge for supporting strategic corporate decision-making. This study proposes a fuzzy GSS framework for acquiring workgroup knowledge from individual memory and aggregating workgroup knowledge to organizational knowledge. This study also proposes an architecture to support the fuzzy GSS framework. The architecture consists of user agents, information management agents, and a fuzzy model manager. To illustrate how the fuzzy GSS framework can be used to support the whole process of organization knowledge acquisition, an Internet-based GSS was developed and applied in a marketing decision process. It showed that the framework was effective for acquiring organizational knowledge.

• 설비공학논문집
• /
• 제4권4호
• /
• pp.243-252
• /
• 1992

A mixed convection heat transfer from two vertical parallel plates has been studied numerically by the finite difference method. Effects of the Grashof number, the relative length, $L_2/L_1$. the dimensionless temperature ratio, ${\Phi}_2/{\Phi}_1$ and the dimensionless plate spacing, $b/L_1$ are examined for the heat transfer. Independent of the Grashof numbers and $L_2/L_1$, the dimensionless vertical velocity distributions skewed on the left plate as ${\Phi}_2/{\Phi}_1$ decreased. The dimensionless vertical velocity distribution for $Gr/Re^2=1$ and ${\Phi}_2/{\Phi}_1=1.0$ is skewed to the right plate $L_2/L_1=0.5$, symmetric at $L_2/L_1=1.0$ and skewed to the left plate at $L_2/L_1=1.5$. But for $Gr/Re_2=10.0$ and ${\Phi}_2/{\Phi}_1=1.0$ reversed velocity patterns are obtained. Regardless of the Grashof numbers and $L_2/L_1$, the mean Nusselt nembers on the inside surface of the left plate decreases and those of the right inside surface increases as ${\Phi}_2/{\Phi}_1$ increases. Temperature, velocity and mean Nusselt number distributions are apparently not affected by $L_2/L_1$.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.212-218
• /
• 1996

The concrete pipe used to distribute irrigation water to the right place now available is commonly made up of cement , sand, earth, pebble, etc. These materials with right ratio and right amount of water were mixed and squeezed through the pipe-making machine called vertical squeezed pipe-making machine, and then a cement prefabricated pipe is produced . This kinds of pipe has been expanding by leaps and bounds. Being little cement contents and low cost, the length of pipe is 1.0m or so with weight of 50kg, which is easy to be made and to be transported. The demolish pressure of it is 0.2 MPa or so, which meets the needs of agriculture irrigation . The buried pipe irrigation system, has been popularized in Jining Municipal , Shandong Province. By the year of 1995 , the irrigation area under pipe conveyancesystem usign this type of pipe has reached 74000 hectares. By calculation, about 27.7million ㎥ water, 2.88 million kWh power , 0.167 million man power and 1528 hectares cu tivated land will be saved one year, adding value of agriculture output increased by 10 million kg. The total economic benefits amount to 0.92 million US$ a year. The paper presents the pipe making course and its application on a large scale area.

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.72-78
• /
• 1984

The notion that the axis of the shaft of the articulator must coincide the patient's mandibular transverse axis tells us the importance of locating the axis precisely. When using kinematic axis to transfer a cast to an articulator, the anatomic asymmetry of the contralateral points will result in certain distortion when the axis transferred to an articulator where the mechanical axis produces symmetry. In this study, after locating the true hinge axis point with Denar hinge axis locator, the discrepancies between true hinge axis point and arbitrary hinge axis point that was 13mm anterior from the posterior margin of center of trangus to the outer canthus of eye were measured. And the discrepancies between left and right true hinge axis point in the superoinferior and anteroposterior directions were measured. For this study, 20 dental students who have no missing teeth and no difficulties of mandibular movement were selected. Upper and lower cast of subjects were mounted on Denar Mark II articulator uisng Denar Slidematic face-bow and centric relation record for the measurement of discrepancies between left and right true hinge axis points. The results obtained as follows. 1. The mean distance from the arbitrary hinge axis point to the true hinge axis point was as follows. Right: horizontal distance; 1.99mm, vertical distance; 2.12mm, linear distance; 3.36 mm. Left: horizontal distance; 1.39mm, vertical distance; 2.06mm, linear distance; 2.09mm. Total: horizontal distance; 1.69mm, vertical distance; 2.09mm linear distance; 3.06 mm. 2. The 87.5% of true hinge axis points were within 5mm of the arbitrary hinge axis point. 3. The mean discrepancies between the right and left hinge axis point were 2.92mm in superoinferior direction and 4.74mm in anteroposterior direction. 4. When transferring the axis to the articulator, anatomic asymmetry between right: and left axis point produces in dislocation of cast on the articulator, and undesirable shift in esthetic tooth position will be resulted.

• 한국수정란이식학회지
• /
• 제30권1호
• /
• pp.51-57
• /
• 2015

This study was aimed to determine the biometry of genital organs, incidence of gynecological disorders and pregnancy loss in Black Bengal goat (Capra hircus). Genitalia of 118 does were collected from local abattoirs. Biometric parameters of genital organs were measured and gross and histopathological examinations were carried out for detection of abnormalities. For gravid uterus, age of the fetus was determined by measuring crown-rump length. There was no significant difference in the length, width and weight of right and left ovaries (P>0.05). However, the number of follicles between left ($5.3{\pm}2.3$) and right ovaries ($7.4{\pm}2.7$) varied significantly (P<0.05). The mean length of right fallopian tube and uterine horn were not varied with those of left fallopian tube and uterine horn. The length of uterine body, cervix and vagina were $1.3{\pm}0.1cm$, $3.3{\pm}0.5cm$ and $6.8{\pm}1.3cm$, respectively. Overall, 29 (24.6%) genitalia had abnormalities. Fifteen genitalia (12.7%) had ovarian abnormalities including ovaro-bursal adhesions (6.8%), parovarian cyst (5.1%) and follicular cyst (0.9%). Uterine abnormalities were found in 12 genitalia (10.2%) and predominant uterine lesion was endometritis (6.8%) followed by adenomyosis (1.7%), hemorrhagic lesion on endometrial surface (0.9%) and cyst in broad ligament (0.9%). In addition, cyst in fallopian tube (0.9%) and vagina (0.9%) were recorded. The proportion of slaughtered pregnant goats was 15.3% (18/118). The pregnancy wastage was highest in the first month (50.0%) followed by second (33.3%) and third (16.7%) month. It can be concluded that ovaro-bursal adhesions, parovarian cyst and endometritis are the gynecological disorders of major concern in Black Bengal goat.