• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.844-847
• /
• 2012

메타 물질의 한 형태인 LHTL(Left-Handed Transmission Line)과 기존의 전송 선로 형태인 RHTL(Right-Handed Transmission Line)을 이용하여 광대역 I-Q 벡터 신호 생성을 위한 $90^{\circ}$ 커플러를 설계, 제작하고 측정을 하였다. LHTL과 RHTL 모두 커패시터와 인덕터를 이용하여 합성 전송 선로 형태로 구성함으로써, 그 크기를 최소화 하였다. 또한, 제안된 커플러 제작에 필요한 Wilkinson 전력 분배기를 합성 RHTL을 이용하여 간단하게 구현함으로써 전체 회로의 크기를 $11mm{\times}12mm$로 만들 수 있었다. 주파수 범위 0.8~1.25 GHz에 대해 출력의 위상 차이가 $90^{\circ}{\pm}5^{\circ}$를 유지함으로써 광대역 $90^{\circ}$ 커플러를 작은 크기로 만들 수 있었다. 동 주파수 범위에 대해 삽입 손실을 1.6 dB 이하로, 반사 손실을 10.1 dB 이상으로 유지 가능했다. 필자가 아는 한 이는 그 주파수 대에서 가장 작은 광대역 $90^{\circ}$ 커플러이며, MMIC(Monolithic Microwave Integrated Circuit)로 만들 경우 그 크기를 훨씬 더 줄일 수 있을 것이다.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.36-40
• /
• 2013

본 논문에서는 덤벨형 결함 접지면 구조를 갖는 복합 좌-우향(CRLH) 전송선로를 이용하여 초광대역 대역통과 여파기를 설계하였다. 결함 접지면 구조와 마이크로스트립 인터디지털 캐패시터를 이용하여 CRLH 전송선로를 구현하고 이것을 이용하여 필터를 설계하였다. CRLH 전송선로는 저역통과와 고역통과 필터의 복합적인 특성을 나타내는데, 그것들의 차단주파수를 잘 조절함으로써 초광대역의 대역통과 필터의 특성을 얻을 수 있다. UWB 필터 특성을 얻기 위해 1, 2, 4, 8 셀을 갖는 CRLH 전송선로에 대해 시물레이션하였고, 본 논문에서는 결과를 검증하기 위해 4 셀 구조의 UWB 필터를 설계 제작하였다. 측정된 결과는 시뮬레이션 결과와 일치하며 5GHz 중심주파수에서 88%의 넓은 대역폭을 갖는다.

• 한국정보통신학회논문지
• /
• 제17권10호
• /
• pp.2233-2238
• /
• 2013

본 논문에서는 복합 좌/우향 (CRLH) 전송 선로를 이용하여 초광대역 필터의 새로운 설계 방법에 대해 나타내었다. CRLH 전송선로의 특성을 구현하기 위해 접지면에는 결함 접지면 구조(DGS)와 윗면에는 마이크로스트립 인터디지털 결합기를 이용하였다. 본 논문에서 제안하는 CRLH 전송선로는 저역통과 필터와 고역통과 필터의 특성을 결합한 특성을 나타내며 삽입손실이 적고 광대역 필터 특성을 얻을 수 있는 장점이 있다. 몇 개의 셀 구조에 대해 연구하였으며, 본 논문에서는 3-셀 구조의 UWB 필터를 설계하고 구현하였다. 실험결과와 시뮬레이션 결과가 일치하며 중심주파수 5 GHz에서 105 %의 대역폭을 나타내며 삽입손실은 중심주파수에서 0.7 dB를 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.993-997
• /
• 2004

A data error inspection algorithm for wireless digital data communication was developed. Original data converted By wireless digital data error inspection algorithm. Wireless digital data is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error inspection algorithm in order to decrease the data distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error inspection algorithm for error check of transmission data. This study is also that investigation and search for error inspection algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro processing the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which is open to public touse free within the limited power.

• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.1050-1055
• /
• 2018

In this paper, we analyzed the sensitivity of matching elements for the dual-band operation of a power amplifier with composite right/left-handed (CRLH) transmission lines. Metamaterial theory enables CRLH transmission to support arbitrary impedance matching at dual frequencies. In general, at sub-GHz range, the CRLH matching networks are commonly implemented with lumped elements, which are prone to manufacturing distribution. In order to reduce the effect from the distribution of element values in design, we suggest a method to analyze the sensitivity of matching elements from the performance aspect of power amplifiers. Based on the analysis, a 40dBm dual-band power amplifier operating at 0.7GHz and 1.5GHz is designed.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.41-46
• /
• 2022

This study is a Ku-band array antenna for the manufacture of low-orbit satellite communication terminals, designed to have miniaturization, high gain, and wide beam width. The transmission of low-orbit satellite communication has a right-rotating circularly polarized wave, and the reception has a left-rotating circularly polarized wave. The 4×8 array antenna was separated for transmission and reception, and it was combined with the RF circuit part of the transmitter and receiver, and was terminated in the form of a waveguide for RF signal impedance matching in the form of a transition from the microstrip line to the waveguide. The 30° beam width of the receiver maximum gain of 19 dBi and the 29° beam width of the transmitter maximum gain of 18 dBi are shown. Through this antenna configuration, the system was configured to suit the low-orbit satellite transmission/reception characteristics.

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.280-286
• /
• 2012

The conventionally classified waves are reclassified in this paper, including the waves associated with metamaterial (MTM) transmission lines. Various types of guided waves in periodic structures are analyzed for 1D Composite Right/Left Handed (CRLH) transmission lines (TL). In addition, dispersion diagrams for 1D CRLH, RH, and LH TLs are presented in terms of radiation conditions. We have refined the design equations of the conventional 1D CRLH TL and proposed a condition to realize the desired phase shift and its slope per unit cell. This condition has been applied to the conventional Wilkinson power divider and realized into MTM added $90^{\circ}$ hybrid coupler. Based on the 10 dB return loss and the $90{\pm}10^{\circ}$ phase shift, the bandwidths of the MTM added $90^{\circ}$ hybrid coupler are 82.25% and 103.5% against the conventional 23% and 52.5%, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.46-49
• /
• 2003

This paper proposes a method to solve expansion problem for a transmission network, given future generation and load strategy, and alternative types of lines available, subject to load, reliability and right of way constraints, the problem is formulated as a series of zero one integer programs which are solved by an efficient branch and bound algorithm A study test result on the 63-buses test system shows that the proposed method is practical and efficiently applicable to the transmission expansion planning.

• Corrosion Science and Technology
• /
• 제6권2호
• /
• pp.77-81
• /
• 2007

Fault current can be discharged from power transmission tower due to lightning or inadvertent contact of crane, etc. Pipelines in proximity to either the source of the ground fault or the substation grounding grid may provide convenient conductive path for the fault current to travel. Inappropriate measures to the neighboring pipelines against the fault current may cause severe damages to the pipes such as coating breakdown, arc burn, puncture, loss in wall thickness, or brittle heat-affected zone. Like inductive and conductive AC coupling, steadily induced fault current right after the coating breakdown can lead to corrosion of the pipeline. In this work, some protection guidelines against fault currents used in the field have been validated through the simulation and analytical method.