• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.92-96
• /
• 2011

In this paper, we present a bandpass filter (BPF) based on composite right-/left-handed (CRLH) structure for improving the linearity of the power amplifier. The proposed BPF consist of the inter-digit signal line on the top plane and the complementary split ring resonator (CSRR) on the bottom plane, respectively. The insertion loss is minimized at operation frequency and the 2nd harmonic is suppressed by the bandpass filter using the CRLH structure, respectively. The output power of 33 dBm, the 2nd harmonic of -53.527 dBc, 3rd inter-modulation distortion of -36.16 dBc was obtained at 2.14 GHz, respectively. Compared with the reference power amplifier, the 2nd harmonic of 16 dB and 3rd inter-modulation distortion of 12 dB have been improved at 2.14 GHz, respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.12-20
• /
• 2013

In this paper, a co-planar waveguide(CPW) fed zeroth-order resonant(ZOR) antenna with frequency reconfigurable radiating structures is fabricated and measured. The unit cell of proposed antenna consists of a series metal-insulator-metal(MIM) capacitor and two shunt line inductors which are shorted through the via. The proposed antenna is designed based on a composite right/left-handed(CRLH) transmission line with two unit cells and it has open ended structure in order to radiate electromagnetic energy mainly on the shunt arm. In order to reduce the antenna size and to exhibit a frequency reconfigurable ability using diode switches four straight strips bent by 90 degrees are used as shunt inductors. The total size of fabricated antenna is $0.22{\lambda}_0{\times}0.16{\lambda}_0$ at zeroth-order resonant(ZOR) frequency. The measured maximum gain and bandwidth (VSWR ${\leq}2$) are 3.1 dBi and 56MHz at ZOR frequency of 2.97 GHz, respectively. This type of antenna can be applied to a frequency reconfigurable antenna system with triple bands.

• Journal of Chest Surgery
• /
• v.43 no.1
• /
• pp.67-72
• /
• 2010

Ten percent of all myxomas are the familial form. Familial myxomas appear to have autosomal dominant transmission. We experienced two siblings with familial myxomas. A left atrial myxoma was surgically removed in a 21-year-old woman. Six years later, other myxomas were found in the right atrium and the left atrium and these were also surgically removed. Right ventricular and right atrial myxomas were surgically excised in her brother. The two siblings were found to have frame-shift mutations in the PRKAR1A gene (c.537delA; p.Gly180GlufsX26), which is the causative gene for Carney complex. Obtaining the genetic diagnosis makes it possible to prepare more effective therapeutic strategies for these patients and the gene carriers. Complete excision, ruling out multicentricity and proper postoperative follow up are all necessary to avoid recurrence of myxoma.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.15-21
• /
• 2019

The worm reducer is capable of quadrature power transmission when the shafts are disposed at right angles to each other. Since a large reduction ratio can be obtained of up to approximately 1/100 and a sliding movement is performed during operation compared with other gears, the noise and vibration are small, and there is the advantage that reverse rotation can be prevented. On the other hand, severe wear and damage are displayed on the gear and worm tooth surface, and many defects, such as intense heat generation of the reducer, occur. In the reducer case, the four-piece casing method was selected to solve the problems of heat generation, transmission efficiency, and assemblability. In this paper, we analyzed the problems of the worm and worm wheel (the core parts of a 5-Ton worm reducer) and casing through these methods and researched how to solve them.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.433-439
• /
• 2012

In this paper, we proposed the triplexer using unit-cell of CRLH transmission line which has a bandpass characteristic to reduce adjacent channel interference. The input impedance of triplexer with each channel filter is operated open-circuit at the resonance frequencies of other channels. Such property is due to the combination a series and parallel resonance circuits of CRLH-TL unit-cell. The measured triplexer results are showed a measured insertion loss of each channel, less than 1.5 dB, matching at each port, less than 15dB and isolation between channel, better than 25 dB. Also, to validate the triplexer, a small signal amplifier with triple-band is designed and tested. the measured amplifier results show good agreements with prediction.

• Korean journal of communication and information
• /
• v.19
• /
• pp.65-93
• /
• 2002

This research deals with meanings and issues of 'broadcasting area' in which trans-regional broadcasting media such as satellite broadcasting and webcasting provoked. The issues around broadcasting area have raised the examination of fundamental broadcasting philosophy in Korea, i.e. establishment of broadcasting area intends to foster new media development? or protect local culture and local journalism? After assessing current criticisms around the broadcasting area, this study particularly addresses re-transmission outside the broadcasting area, satellite broadcaster's re-transmission of terrestrial channels, and widening of broadcasting area. This research argues that broadcasting area has lost its raison-etre due to the advent of new communication technology, even though it was maintained to protect regional broadcasting stations. Therefore it argues that now is the right time to change the broadcasting area in the digital media era. This approach could strengthen the competitiveness of regional broadcasting stations and solve the rows surrounding broadcasting areas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.801-808
• /
• 2011

We propose MBAP(Multi-rate Broadcast Active Probing) technique to get the right measurements for link quality in Wireless Mesh Network (WMN). Most routing protocols for WMN make use of link quality-aware routing metrics, such as ETX(Expected Transmission Count) and ETT(Expected Transmission Time), while the hop count is usually used in MANET (Mobile Ad-hoc NETwork). A broadcast based active proving technique is adopted in the previous studies to get the ETX or ETT of a link. However this technique does not reflect the multi-rate feature of WLAN because it uses a single fixed transmission rate for broadcast which usually differs from the actual rate used in data transmissions. MBAP overcomes this shortage by exploiting various rate broadcast frames for probing. We implement MBAP on linux system by modifying WLAN driver and related kernel sub-systems. Experimental results show that MBAP can capture link quality more accurately than the existing techniques.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.21-25
• /
• 2013

The dual-stream based stereoscopic 3D HDTV broadcasting service was launched recently. Although the dual-stream based HDTV service has been successfully provided, the 3D HDTV broadcasting system requires more bandwidth efficient transmission schemes because it should convey both left and right HD resolution images simultaneously in the finite 6MHz bandwidth. In this paper, we consider more advanced ATSC transmission schemes that use higher modulation such as 16-QAM and concatenated RS code and block LDPC codes. Compared with conventional ATSC system and the modified ATSC system in [2], the proposed system has about 2.97dB and 1.12dB SNR gain at the payload data rate of 19.44Mbps compared with the existing ATSC system and the modified ATSC system [2]. Also, the proposed scheme requires only 1.05dB power increase for the 3D HDTV service, which is reasonable SNR increase value and applicable to the advanced 3D high definition broadcasting realization in limited 6MHz bandwidth.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.68-70
• /
• 2001

Because of the difficulty of acquiring new generation sites and right- of-way, additional units have been added to the existing generation sites and the transmission system has been developed into highly meshed configuration. The reliable operation of power systems has been restricted by this system characteristics. The enhancement of system analysis techniques and establishment of appropriate measures have been required in this situation. In addition the deregulation of electric power industry in Korea would give rise to better tools fur power system analysis and control. In this paper, dynamic models were developed and stability studies were implemented using developed dynamic models of EUROSTAG and compared with the simulation results of PSS/E.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.245-250
• /
• 2013

This paper presents a tunable bandpass filter based on the varactor-loaded composite right- and left-handed transmission line (CRLH-TL). The proposed filter is composed of one CRLH-TL unit cell, which corresponds to the third-order bandpass filter. The tunable bandpass filter is designed using only lumped-elements. The use of lumped elements saves space and lowers the fabrication cost. The size of the proposed tunable bandpass filter is $17mm{\times}5mm$, neglecting the feed lines and DC lines. All of the varactors are controlled by one DC bias. The center frequency of the bandpass filter can be controlled by varying the value of the varactors. The tunable range of the center frequency is from 412.5 to 670 MHz. The insertion loss is less than 3 dB, the return loss is more than 10 dB in the passband.