• Journal of Korea Multimedia Society
• /
• v.19 no.12
• /
• pp.2036-2043
• /
• 2016

The $360^{\circ}$ Virtual Reality (VR) live-action movies are filmed by attaching multiple cameras to a rig to shoot the images omni-directionally. Especially, for a live-action film that requires a variety of scenes, the director of photography and his staff usually have to operate the rigged cameras directly all around the scene and edit the footage during the post-production stage so that the entire process can incur much time and high cost. However, it will also be possible to acquire high-quality omni-directional images with fewer staff if the camera rig(s) can be controlled remotely to allow more flexible camera walking. Thus, a $360^{\circ}$ VR filming system with remote-controlled camera rig has been proposed in this study. The movie producers will be able to produce the movies that provide greater immersion with this system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.76-82
• /
• 1999

The object of this study is to find new evalution index for in-cylinder flow characteristics insteady of current swirl, tumble coefficient using steady flow test rig on intake port system. To this end, port flow rig test was conducted on DOHC head varying intake valve lift respectively. Finally combination angular coefficient and inclination angle were introduced as new evaluation index for in-cylinder angular flow characteristics.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.569-577
• /
• 2014

From the year 2009, 3D Stereoscopic movies and TV have been spotlighted after the huge success of a movie called "AVATAR". Moreover, most of 3D movies & contents are created by mixing real-life shots & virtual animated pictures, such as "Robocop 3", "Transformer 4" as shown in 2014. However, the stereoscopic 3D video film shooting with a traditional stereoscopic rig camera system, takes much more time to set the rig system and adjust the system setting for proper film making which necessarily resulting in bigger cost. In fact, these problems have depreciated the success of Avatar as decreasing demand for 3D stereoscopic video shooting. In this paper, inherent problems of traditional stereoscopic rig camera system are analyzed, and as a solution for the problems, a novel implementations of single-lens optical stereoscopic 3D camera system is suggested. The new system can be implemented to a technology for separating two lights when even those lights passing through in the same optical axis. The system has advantages of adjusting the setting and taking video compared with traditional stereoscopic 3D rig systems. Furthermore, this system can acquire comfortable 3D stereoscopic video because of the good characteristics of geometrical errors. This paper will be discussed the single-lens stereoscopic 3D camera system using rolling shutters, it will be tested geometrical errors of this system. Lastly, other types of single lens stereoscopic 3D camera system are discussed to develop the promising future of this system.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.3
• /
• pp.129-137
• /
• 2013

Each owner or operator of offshore products uses a maintenance management system like CMMS(Computerized Maintenance Management System) in order to manage their assets effectively and efficiently for a long time. But most of maintenance management systems have been focused on machinery items, not on 'Hull' until now. On the other hand, classifications like ABS, DNV, GL are having a sale on hull inspection and maintenance system for ships and an interest in hull maintenance system is increasing because of the application of EDD(Extended Dry Docking). This paper discusses the concept, inspection process and the practical application of Hull maintenance for Semi-submersible drilling rig to extend the service life and run a stable operation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.119-128
• /
• 2004

With the growing traffic density and increasing comfort requirements, the automation of the drive train will gain importance in vehicles. The automatic clutch actuation relieves the drivers especially in urban driving and stop-and-go traffic conditions. This paper describes the dynamic modeling of a clutch actuator and clutch spring. The dynamic model of the clutch system is developed using MATLAB/Simulink, and evaluated by experimental data using a test rig. This performance simulator is useful to develop the clutch-by-wire (CBW) system for an automated manual transmission (AMT). The electro-mechanical type CBW system is also implemented as an automatic clutch for AMT. The prototype of CBW system is designed and implemented systematically, which is composed of an electric motor, worm gear and slider-crank mechanism. The test rig is developed to perform the basic function test of the automatic clutch, and the developed prototype is validated by the experimental data on the test rig.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.413-422
• /
• 2017

The objective of this study was to prove possible effects of a habitable place for fish around semi-submersible drilling rig which measured underwater radiated noise, irradiance distribution of rig's light and conducted experimental fishing in Malaysia territory and observed for distribution of fishes around the rig by ROV during drilling operation in the East Sea of Korea. As a result underwater radiated noise was $130dB/{\mu}Pa$ from 156.25 to 187.50 Hz, irradiance distribution of light was between 21.5 and 43.1 lx. Despite this result, underwater radiated noise was not a threat to fish around rig and low irradiance distribution of light also played a role in the luring influence of the fishes at night. Fish showed up in the beginning of drilling operation and at the end of drilling operation. However, there are few fish in the midst of drilling operation. The main reason for this result was the destruction of the habitable place due to blow out mud and broken pieces of ground formation in drilling hole. The results are expected to contribute to reasonable fishery management around rig.

• Tribology and Lubricants
• /
• v.34 no.1
• /
• pp.33-41
• /
• 2018

This paper describes a new test rig for identification of rotordynamic force coefficients of squeeze film dampers (SFDs) in automotive turbochargers (TCs). Prior studies have mainly concentrated on relatively large-sized SFDs used in aircraft engines, turbocompressors, and turbopumps. The main objective of the current study is to propose a test rig for identification of dynamic force coefficients of small-sized SFDs (a journal diameter of ~11 mm). The current test rig consists of a journal, a SFD cartridge, four support rods, an upper structure, a data acquisition (DAQ) system, and an oil circulation unit. The annular gaps between the journal outer surface and SFD cartridge inner surface create SFD film lands. The damper has two parallel film lands separated by a central groove, having an axial length and depth of 3 mm. Each film land has a length of 4 mm with a $40{\mu}m$ radial clearance. The static load and dynamic impact tests identify the structural characteristics (i.e., stiffness and natural frequency) of the journal and assembled test rig. The measurements show good agreement with predictions. The SFD performance data from this test rig will be used to develop innovative TC rotor systems with improved NVH and reliability characteristics incorporating advanced SFD technology.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.7-13
• /
• 2013

A scaled version of a roller rig is developed to demonstrate the dynamic characteristics of a railway vehicle for academic purposes. This rig is designed based on Jaschinski's similarity law. It is scaled to 1/10 of actual size and allows 9-DOF motion to examine the up and down vibration of a train set. The test rig consists of three sub-hardware components: (i) a driving roller mechanism with a three-phase AC motor and an inverter, (ii) a bogie structure with first and second suspensions, and (iii) the vehicle body. The motor of the rig is capable of 3,600rpm, allowing the test to simulate a vehicle up to a maximum speed of 400Km/hr. Because bearings and joints are properly connected to the sub-structures, various motion analyses, such as a lateral, pitching, and yawing motion, are allowed. The slip motion between the rail and the wheel set is also monitored by several sensors mounted in the rig. After the construction of the hardware, an experiment is conducted to obtain the natural frequencies of the dynamic behavior of the specimen. First, the test rig is run and data are collected from six sets of accelerometers. Then, a numerical analysis of the model based on the ADAMS program is derived. Finally, the measurement data of the first three fundamental frequencies are compared to the analytical result and the validation of the test rig is conducted. The results show that the developed roller rig provides good accuracy in simulating the dynamic behavior of the vehicle motion. Although the roller rig designed in this paper is intended for academia, it can easily be implemented as part of a dynamic experiment of a bogie and a vehicle body for a high-speed train as part of the research efforts in this area.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.354-358
• /
• 2009

Micro gas turbine engine is well known as a power plant of unmanned aerial vehicle and a small scale emergency generation system and also, it is significant as initial research of large gas turbine and educational purpose of gas turbine. Many sort of Micro gas turbine test set for education is produced by several manufacturers, but all of the engine control system of them is separated with data acquisition system; moreover, the engine control algorithms are inaccessible and related variables could not be collected. In this investigation, the Integrated Modifiable Test Rig which has modifiable engine start-up, drive and situational control logics is developed by LabVIEW with I/O devices and it provides wide experimental applicability to studies of dynamic characteristics of fuel system and combustion instability.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.675-683
• /
• 2018

In this paper, we have proposed a design and verification methods of electrical system and power loads for unmaned aeriel vehicles(UAVs) through electrical load analysis. In order to meet a UAV system requirement and electrical system specifications, we have designed an electrical power system for efficient power supply and distribution and have theoretically analyzed the power loads according to the power consumption and power bus design of UAV. Using electrical system rig, the designed electrical power system has been experimentally verified. Also, we have performed several flight tests to verify the UAV electrical system and power loads. It is concluded that the proposed design and verification method of electrical system for UAV system.