• ALGAE
• /
• 제22권4호
• /
• pp.253-259
• /
• 2007

This study deals with the taxonomy of the marine diatom Ditylum brightwellii (West) Grunow: shape, size and ratio, marginal ridge, labiate process, areolation, and seasonal distribution are all considered. Ditylum brightwellii were divided into two type; prism- and cylinder-shaped. Comparisons between specimens from the Yellow Sea were made on, (1) shape- prism types are prismatic-shaped and/or regular square or right-angled tetragon, cylinder types are cylinder-shaped and/or long right-angled tetragon in the girdle view, respectively; (2) size and ratiodiameters of prism types are 82.1 ± 2 μm, while those of cylinder types are 21.2 ± 5 μm and ratio of pervalvar axis/diameter- prism types cells are 1.0-1.5, but cylinder types are 3.9-5.5; (3) marginal ridges- prism types have dotted, while those of the cylinder-type cells have piece, slotted or fimbriated on the marginal ridge; (4) labiate process- both prism- and cylinder-types are central part in valve face, but length of labiate processes of prism types are longer than those of cylinder types; (5) cell margin- the girdle margin show many shallow furrows in prism type and smooth in cylinder type; (6) areolation- both prism- and cylinder-types are a radial pattern in the valve center, but areolae of prism types are larger than those of cylinder types; (7) seasonal distribution- cylinder types are dominated in summer and prism types in the other seasons.

• 한국해양학회지
• /
• 제26권4호
• /
• pp.340-349
• /
• 1991

1987년 8월 24일부터 9월 28일까지 경기만에 발달한 조류 기원 사퇴위에서 측정한 조류 자료를 분석하여 해저면 상부 1.0 m 에서의 조류 속도(U /SUP 100/) 및 경계면에 서의 전단 속도(U /SUP */)를 구하였다. 전 조사기간 동안 평균 조류 속도는 중충(해 저면 상부 9.0 m)에서 창조시 56.3 cm/sec, 낙조시 63.7 cm/sec 의 지수는 0.15로 추 정된다. 해저 경계층에서의 유속 구조가 대수적 속도 구조 (logarithmix velocity profile) 가정을 이용하여 구한 U /SUP 100/, U /SUP */의 평균값은 각각 41.4 cm/sec로 계산되었다. 본 연구에서 계산된 평균 U /SUP */ 값은 (2.39 cm/sec)동일 지 역에서 최(1990)가 보고한 경계면에서의 임계전단 속도 U /SUP *c/ 보다 상당히 크며, 따라서 본 연구지역의 모래는 대부분의 조석 기간중 쉽게 침식 운반되는 것으로 보여 진다.

• 한국석유지질학회지
• /
• 제13권1호
• /
• pp.17-23
• /
• 2007

ArcGP 중력자료를 이용하여 다산과학기지가 위치한 북극 스발바드 군도의 중력특성을 파악하였다. 지형자료와 유사한 형태로 분포하는 free-air 중력이상에서 보이던 대륙 연변부의 가장자리 효과는 부게보정 후 보이지 않고, 육상지역의 CTOPO30 지형자료를 이용한 지형보정을 거친 완전 부게 중력이상에서 육상지역에서 해양지역으로 갈수록 중력이상이 증가하는 즉, 모호면의 상승과 관련이 깊은 특성이 관찰된다. 파워스펙트럼 분석을 통해 결정된 절단파수를 이용할 필터링 후 계산된 고주파 영역의 잔여이상에서 육상지역의 단층대를 따라 발달하는 특징적인 고이상대와 두꺼운 퇴적층에서 기인한 저이상대가 나타나며 해양지역 대륙사면의 최하부에서 기반 함몰 내지는 기반암 상부의 두꺼운 퇴적층과 관련이 있는 저이상대가 발달하고 있다. 역산 모델링을 통해 저주파 영역 성분에서 계산된 모호면의 기복은 스발바드 군도에서 유라시안 판 경계인 Knipovich ridge쪽으로 갈수록 상승하는 즉, 대륙주변부에서의 전형적인 특성을 보여준다.

• 정보처리학회논문지B
• /
• 제11B권3호
• /
• pp.297-302
• /
• 2004

본 논문에서는 컴퓨터 시각에서 가장 중요한 과제의 하나인 ,3차원 물체의 표현에 대해 원뿔형태의 기술과 표면 분류시 임계치를 자동으로 선정하는 방법에 대해 제안하고자 한다. 기존에 미분기하학에서 사용한 평균 곡률 (H)과 가우스 곡률(K)은 물체의 상당 부분을 차지하고 있는 원뿔표면에 대한 분류가 불가능하였다. 또한 평균 곡률과 가우스 곡률의 부호값에 따른 표면 분류가 실제 거리 영상에 적용시 올바로 분류가 안 되는 문제를 가지고 있었다. 이 논문에서는 기존의 이 같은 두 가지 문제를 해결하기 위해 리지와 벨리의 표면분류로부터 원뿔표면 형태(cone ridge, cone valley)를 분류해 내었다. 즉, 원뿔표면 형태의 경우 H의 값이 일정하고, 원뿔표면 형태의 경우는 H의 값이 다름을 이용하여 원뿔표면 형태를 분류하였다. 아울러 통계적인 관점에서 표면분류 임계치를 선정할 수 있는 방법을 제안하고 실험에 의해 제안한 방법의 유용성을 입증하고자 한다.

• Journal of Korean Dental Science
• /
• 제17권2호
• /
• pp.64-74
• /
• 2024

This case report presents the long-term radiographic outcomes of a novel approach for simultaneous lateral augmentation and implant surgery. A 60-year-old male patient who required tooth extraction of the maxillary central and lateral incisors due to trauma visited the clinic. After tooth extraction, severe horizontal and vertical deficiencies occurred owing to atrophy of the alveolar ridge, and a simultaneous guided bone regeneration (GBR) procedure was planned along with the installation of two implants. In the present case, a modification of the conventional 'sandwich technique' was used by placing the mixture of autogenous bone chips and xenografts at the outermost layer to maximize the osteogenic potential at the coronal part of augmentation while applying solely xenografts at the inner layer. To enhance volumetric stability, an autogenous block of periosteum harvested from the maxillary tuberosity was incorporated between the two layers. Cone-beam computed tomography was performed at baseline and 3 years after the surgery to compare radiographic outcomes. Dehiscence after fixture installation was successfully observed at the re-entry of the surgery site. Three years after the surgery, average horizontal bone gains of 6.11 mm and 4.12 mm were observed in the maxillary central and lateral incisor areas, respectively. Healthy peri-implant mucosa and well maintained marginal bone levels were observed 8 years after the surgery, meeting the criteria for implant success. The findings of this case suggest that a substantial amount of horizontal bone gain can be obtained with a layered approach using autogenous bone materials and xenografts, highlighting the advantages of incorporating autogenous blocks into the simultaneous GBR procedure.

• 건축역사연구
• /
• 제20권3호
• /
• pp.7-22
• /
• 2011

With the accumulations of outcomes from archaeological excavations of mountain fortress of three kingdoms period, there have been studies about time-periodic territory range of mountain fortress, difference in the way(method) of construction, defence system and so on from various points of view. This is an empirical study on the construction method of the valley part of stone fortress. First of all, it is required to secure large quantity of fresh water for those who lived at mountain fortress. Especially when builders of fortress construct a fortification at the valley part of stone fortress, in advance they must sufficiently consider several options including the establishment of sustainable water resources. First, when it comes to build a fortification on a ridge[or a slope] of a mountain, you have only to consider a vertical stress. However, when it comes to build a fortification at the valley part of a mountain, You must have more sufficient preparations for the constructing process. Because there are not only a vertical stress but also a horizontal pressure simultaneously. Second, a fortification of mountain fortress built by using unit building stone is a structure of masonry construction like brick construction, and the valley part of it is where the construction of the fortification begins. Third, when it comes to build a fortification at the valley part of a mountain, it seems that they use a temporary method such as coffer dam in oder to prevent the collapse of the fortification due to heavy rain. Furthermore, in response to a horizontal pressure a fortification is built by the way of its plane make an arch, or by piling up the soil with the plate method(類似版築) and earthen wall harder method(敷葉) they increase cross-sectional area of the fortification and its cutoff capacity. In front direction they put the reservoir facility for the fear that the hydraulic pressure and earth pressure are directly transmitted to the fortification. The process of constructing the fortification at the valley part of a mountain is done in the same oder as follows; leveling of ground(整地) ${\Rightarrow}$ construction of coffer dam ${\Rightarrow}$ construction of the fortification between the both banks of the valley ${\Rightarrow}$ construction of the fortification at bottom part of spill way(餘水路) between the both banks of the valley ${\Rightarrow}$ construction of spill way(餘水路) & reservoir facility ${\Rightarrow}$ construction of the fortification at upper part of spill way between the both banks of the valley. Coffer dam facility seems to be not only the protection device on occasion of flood but also an important criterion to measure the proper height of spill way or tailrace(放水路). This study has a meaningful significance in that it empirically examines the method of reduction of the horizontal pressure which the fortification at the valley part of a mountain takes, the date the construction was done, and wether the changes in climate such as heavy rainfall influence the process of construction.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.29-42
• /
• 1992

자유표면하에 잠긴 복잡한 3차원 물체 주위의 흐름을 해소하기 위한 수치계산법이 TUMMAC(Tokyo Univ. Modified Marker And Cell)법을 기초로 하여 개발되었다. 임의물체의 no-slip 3차원 물체표면조건을 보다 간단히 처리하기 위하여 "porosity"라는 개념이 도입되었으며, 담수성에 잠겨 있는 해저돌출물 주위의 유동을 계산하여 그 응용성을 검토하였다. 돌출물 후방의 복잡한 와동들의 상호간섭이 잘 시뮬레이션 되었다.시뮬레이션 되었다.

• 한국임상수의학회지
• /
• 제16권2호
• /
• pp.523-528
• /
• 1999

Subaortic stenosis in a 2.9kg, 3-month-old pug dog and a 11 kg, 4-month-old Rott -weiler dog showing signs of dyspnea, tachypnea, anorexia, exercise intolerance and depression was diagnosed with electrocardiography, thoracic radiography and ultrasonographic evaluation. In electrocardiography, PR interval widening, R wave amplitude increase in lead II in case 2, ST segment depression and left axis deviation in case 1 and 2 were identified. In thoracic radiographs, enlarged left ventricle and atrium, caudal displacement of left crus of diaphragm and caudal part of cranial mediastinum widening were identified in ventrodorsal view. In lateral view, left ventricular enlargement, secondary dorsal deviation of trachea and post-stenotic dilation of aorta were seen. Also, edematous pulmonary changes were shown in peri-hilar area. In ultrasonographic examination, left ventricular dilatation, pericardial effusion and subaortic valvular ridge were seen with real time B-mode in right parasternal long axis view. Aortic valve regurgitation was identified in color-Doppler mode.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.975-978
• /
• 2001

For machining auto-mobile cam, the developed biarcs-fitting method eliminates the ridge problems in conventional straight-line fitting approximation or single-arc fitting of curve tool path where it leaves ridges of tool marks on the machined surface of the workpiece. The powerful advantage of this biarc method is demonstrated by applying it to the numerically controlled machining of a curved cam profile, also verified by using a CNC simulating program for auto-mobile cam profile. As a result, this algorithm may be used in CNC milling and turning for cam profile machining with short block line.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_1호
• /
• pp.29-33
• /
• 2001

A numerical simulation was carried out to investigate the mechanism of snowfall around the Seoul region during a cold air-outbreak in the winter season. A particular case was selected for this study(Dec. 19, 1999). The inflow directions of the synoptic flow in the upper and lower levels were westerly and north-westerly, respectively. Plus, there was a deep trough and thermal ridge at a level of 500/700/850 hPa over the Bal-Hae region, in the northern part of the Korean peninsula. According to the model results, snowfall occurred around the Seoul region with the simultaneous existence of a strong static instability in the lower atmosphere, northerly or westerly dry air advection, and strong thermal advection toward the Seoul region. There was a strong convergence thereby indicating the existence of convective rolls in the clouds. The main energy source of convection over the Yellow sea was a sensible heat flux. The main moisture source was convection. Radiative cooling in the cloud layer intensified the static instability in the lower atmosphere.