• 한국자원식물학회지
• /
• 제22권4호
• /
• pp.299-303
• /
• 2009

넓은잎큰조롱의 두둑높이에 따른 생산성 및 품질향상을 위하여 재배법 확립의 기초자료로 제공하고자 두둑높이를 달리하여 2005년부터 3년간 시험한 결과, 만장, 엽장, 엽폭, 엽수, 엽록소함량, 경엽 건물중은 두둑높이가 높을수록 양적인 증가를 가져왔으나, 경태와 분지수는 두둑높이가 낮을수록 굵거나, 많은 경향이었다. 근수와 근장은 두둑높이 20 cm까지는 두둑높이가 높을수록 많거나, 길었으나, 20 cm 이상의 두둑높이에서는 생육량이 감소하였으며, 근태는 두둑높이가 낮을수록 굵어지는 경향이었다. 비상품근 중 세근은 두둑높이 20 cm에서 다소 많았으며, 부패근은 두둑높이가 낮을수록 많은 경향이었고, 근수량은 두둑높이 20 cm내지 30 cm 까지는 두둑높이가 높을수록 증수되어 두둑높이 10 cm의 515 kg/10a 대비 3%, 11% 증수되었다.

• 한국약용작물학회지
• /
• 제19권4호
• /
• pp.233-237
• /
• 2011

This study was carried out to investigate the seedling establishment and yield of direct-sown Platycodon grandiflorus seeds cultured by three ridge width, 0.4, 0.8, and 1.2 m and four mulching materials, rice straw, rice bran, black plastic film, and no mulching in upland. Seedling establishment rate (70%) was the highest in rice straw mulched plot of 500 seeds/$m^2$ sowed and root yield after one year was also the highest in rice straw mulched treatment and followed by rice bran, no mulching, and black plastic film treatment. In this result, ridge width 120cm and rice straw mulching combined treatment was best for getting the highest seedling establishment ratio and seedling numbers per area. However, ridge width and mulching materials should be considered soil moisture content and weed population for saving labor cost.

• 한국자원식물학회지
• /
• 제18권1호
• /
• pp.22-31
• /
• 2005

콩의 논 재배시 생육반응은 밭에서와는 다른 결과가 예상되므로, 논재배 콩의 휴립조건에 따른 생장분석을 분석 하고자 화엄 풋콩 등 5품종을 고휴와 평휴로 재배하여 생육반응을 분석한 결과는 다음과 같다. 휴립조건에 따른 콩의 지상부 생육은 경장의 경우 전 생육기에서 평휴재배시 높은 경향을 보이지만, 분지수와 경직경은 생육 후기로 갈수록 고휴조건에서 큰 경향을 보였다. 그러나 지상부 생육은 재배조건에 따른 차이보다, 품종간 차이가 보다 뚜렷하게 나타났다. 논에서 휴립 조건에 따른 생육단계별 콩의 지상부생육은, 생육초기인 V5 stage에서는 평휴재배시 건물 생산능력이 고휴재배시 보다 높았으나, 생육이 진전될수록 고휴로 재배할 때 건물중 생산이 높았으며, 전 생육기간 동안 품종별 차이가 뚜렷하였다. 재배조건에 따른 콩의 논에서의 지하부의 생육은, V5, R2 및 R5 stage 등 전 생육기간동안 고휴 재배시 지하부의 생육이 평휴재배조건 보다 왕성하였으며, 재배방법에 따른 고휴재배 효과는 나타나지 않았으나, 품종간 차이는 컸다. T/R율은 평휴로 재배할 경우 높았고, 재배방법에 따른 고휴재배 효과는 나타나지 않았으나, 품종간 차이는 인정되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.39-44
• /
• 1994

This study was carried out to investigate features pertaining to spiral thickenings, which was considered one of the most important diagnostic values, for wood identification. Species, kind of cells with spiral thickening, and ridge numbers of spiral thickening per axial mm were recorded in 71 families, 144 genera, 316 species of Korean hardwoods. Spiral thickening was observed in 128 of 316 species, about 40.5 % of all the investigated, and classified into 6 types on the basis of distributional patterns and morphological features as follows: 1. Type 1, present throughout all vessel element, which was found in 14 families, 19 genera, 43 species. 2. Type 2, present only in small vessel element, which was found in 18 families, 29 genera, 41 species. 3. Type 3, present both in small vessel element and wood fibers, which was found in 8 families, 17 genera, 29 species. 4. Type 4, present in wood fibers, which was found in 1 family, 1 genus, 1 species. 5. Type 5, present only in tail of vessel element, which was found in 4 families, 5 genera, 9 species. 6. Type 6, being present in vessel element faintly or partially, which was found in 2 families, 3 genera, 5 species.

• Journal of Periodontal and Implant Science
• /
• 제52권1호
• /
• pp.3-27
• /
• 2022

Purpose: This study was conducted to evaluate and compare the effects of different graft materials used in alveolar ridge preservation on dimensional hard tissue changes of the alveolar ridge, assessed using cone-beam computed tomography (CBCT) scans. Methods: A systematic electronic search of MEDLINE and the Cochrane Central Register of Controlled Trials and a manual search were conducted from November 2019 until January 2020. Randomized controlled trials were included if they assessed at least 1 variable related to vertical or horizontal hard tissue changes measured using CBCT scans. After a qualitative analysis of the included studies, subgroups were formed according to the graft material used, and a quantitative analysis was performed for 5 outcome variables: changes in vertical alveolar bone height at 2 points (midbuccal and midpalatal/midlingual) and changes in horizontal (buccolingual) alveolar bone width at 3 different levels from the initial crest height (1, 3, and 5 mm). Results: The search resulted in 1,582 studies, and after an independent 3-stage screening, 16 studies were selected for qualitative analysis and 9 for quantitative analysis. The metaanalysis showed a significantly (P<0.05) lower reduction of alveolar ridge dimensions for the xenogenic subgroup than in the allogenic subgroup, both vertically at the midbuccal aspect (weighted mean difference [WMD]=-0.20; standard error [SE]=0.26 vs. WMD=-0.90; SE=0.22) as well as horizontally at 1 mm (WMD=-1.32; SE=0.07 vs. WMD=-2.99; SE=0.96) and 3 mm (WMD=-0.78; SE=0.11 vs. WMD=-1.63; SE=0.40) from the initial crest height. No statistical analysis could be performed for the autogenic subgroup because it was not reported in sufficient numbers. Conclusions: Less vertical and horizontal bone reduction was observed when xenogenic graft materials were used than when allogenic graft materials were used; however, the loss of alveolar ridge dimensions could not be completely prevented by any graft material.

• 한국수자원학회논문집
• /
• 제30권4호
• /
• pp.379-387
• /
• 1997

논에서의 수문 특성을 현장 조사 및 측정하고, 강우-유출 자료로부터 논의 최대 잠재저류장의 확률적 특성을 분석하여, 선행강우조건에 따른 CN을 추정하였다. 추정된 CN은 AMC II의 경우 78이었으며, AMC-I, III의 경우에는 각각 63, 88이었다. 논의 강우-유출자료에 의한 CN은 년 홍수량 자료의 적용여부가 불확실하므로 이를 보완하고, 물고높이나 초기담수심의 영향을 구체적으로 규명하기 위하여 논의 물수지 모형을 구성하였다. 논의 유출량은 선행 강우뿐 아니라 초기담수심에 따라 변화하므로 최대 잠재저류량을 이용하여 CN을 결정하기에는 어려움이 따른다. 따라서, 최대 잠재저류량의 경우와 같이 담수심의 확룰분포함수를 이용하여 CN을 추정하였다. 물수지모형을 이용하여 확률담수심, 물고높이 및 기상자료로부터 논의 유출량을 추정하였다. 추정된 유출량으로부터 CN을 계산하고, 확률 담수심에 해당하는 CN-I, CN-II, CN-III을 결정하였으며, 그 값은 각각 70, 79, 89이었다.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.596-605
• /
• 2005

The cable dome, proposed by Geiger after developing Fuller's idea of tensegrity and improved by Levy, is a new type of large span space structures. In this paper, formulations of the initial forces distribution in members of two main systems of cable dome, which are Geiger dome and Levy dome, are presented. By analyzing the static performance of Levy dome and the variation of internal forces in members of the structure, four groups of design parameters in cable dome structure are represented in terms of: (1) the numbers of rings and the spaces between the rings; (2) the slopes of ridge cables; (3) the lengths of struts; (4) the initial force in one member of the structure.

• 한국조경학회지
• /
• 제28권1호
• /
• pp.109-117
• /
• 2000

The purpose of this study is to examine the effect factors in suburban rural landscape and significant factors of apartment complex which are effective to the skyline of the sloped mountains. Also it is to propose the basic resources to preserve and improve the suburban rural landscape. The target site is Young-In, which shows the typical of rural development. Sides were take in young-In City along the roads and selected for 20 pieces. This study used questionnaire about the suburban rural landscape surveying of 45 students in Kyunghee Univ.. Also we found 2 dependent variables and 8 independent variables totally. Moreover, we have analyzed the data using descriptive statistics, correlation analysis, and multiple linear regression method between the preference and physical factors, and between the vulnerability and perceptional factors. The results are as follows: 1) With the dependent variable of preference, the areas of "green space" and "agricultural productive lands" were highly influenced in the suburban rural landscape positively, but the areas of "apartment complex" and "other buildings" were negatively effected. 2) With the dependent variable vulnerability, the area "apartment complex" and cutting numbers of the "skyline of mountainous ridge" were proved as significantly positive factors, but the length of the "skyline of mountainous ridge" turned out to be a negative factor. Although this study has the difficulty to be generalized, it can be used for planning and designing of the apartment complex in suburban rural landscapes, and it will provide the basic guideline for preserving and managing of the suburban rural landscapes.uideline for preserving and managing of the suburban rural landscapes.

• The Journal of Advanced Prosthodontics
• /
• 제6권5호
• /
• pp.361-371
• /
• 2014

PURPOSE. In case of large horizontal discrepancy of alveolar ridge due to severe resorption, cantilevered crown is usually an unavoidable treatment modality. The purpose of this study was to evaluate the clinical criteria for the placement of the aforementioned implant crown. MATERIALS AND METHODS. The mandible model with 2 mm thick cortical bone and cancellous bone was fabricated from CT cross-section image. An external connection type implant was installed and cantilevered crowns with increasing offset of 3, 4, 5, 6, and 7 mm were connected. Vertical load and $30^{\circ}$ oblique load of 300 N was applied and stress around bone and implant component was analyzed. A total of 14 cases were modeled and finite element analysis was performed using COSMOS Works (Solid works Inc, USA). RESULTS. As for the location of the vertical load, the maximum stress generated on the lingual side of the implant became larger according to the increase of offset distance. When the oblique load was applied at $30^{\circ}$, the maximum stress was generated on the buccal side and its magnitude gradually decreased as the distance of the offset load increased to 5 mm. After that point, the magnitude of implant component's stress increased gradually. CONCLUSION. The results of this study suggest that for the patient with atrophied alveolar ridge following the loss of molar teeth, von-Mises stress on implant components was the lowest under the $30^{\circ}$ oblique load at the 5 mm offset point. Further studies for the various crown height and numbers of occusal points are needed to generalize the conclusion of present study.

• The Journal of Advanced Prosthodontics
• /
• 제7권1호
• /
• pp.76-84
• /
• 2015

This article reviews the topic of how to identify and develop a removable partial denture (RPD) path of placement, and provides a literature review of the concept of the RPD path of placement, also known as the path of insertion. An optimal RPD path of placement, guided by mutually parallel guide planes, ensures that the RPD flanges fit intimately over edentulous ridge structures and that the framework fits intimately with guide plane surfaces, which prevents food collecting empty spaces between the intaglio surface of the framework and intraoral surfaces, and ensures that RPD clasps engage adequate numbers of tooth undercuts to ensure RPD retention. The article covers topics such as the causes of obstructions to RPD intra-oral seating, the causes of food collecting empty spaces that may exist around an RPD, and how to identify if a guide plane is parallel with the projected RPD path of placement. The article presents a method of using a surgical operating microscope, or high magnification (6-8x or greater) binocular surgical loupes telescopes, combined with co-axial illumination, to identify a preliminary path of placement for an arch. This preliminary path of placement concept may help to guide a dentist or a dental laboratory technician when surveying a master cast of the arch to develop an RPD path of placement, or in verifying that intra-oral contouring has aligned teeth surfaces optimally with the RPD path of placement. In dentistry, a well-fitting RPD reduces long-term periodontal or structural damage to abutment teeth.