• Korean Journal of Plant Resources
• /
• v.22 no.4
• /
• pp.299-303
• /
• 2009

This study was conducted to increase the productivity and quality of C. auriculatum Royle ex Wight according to the various ridge height. The higher ridge height increased the vine length, leaf length, leaf width, leaf number, chlorophyll content, and leaf dry weight; however, the lower ridge height increased the stem diameter and branch numbers. The tuber number and length was increased at less than 20cm of ridge height, but the overall growth was retarded in the treatment of over 20cm ridge height. The tuber diameter was also thicker in the lower ridge. The rootlet ratio among the non-commercial tuber was increased in the 20cm and 30 cm ridge, and the decayed tuber ratio was increased in the lower ridge. The yield of tuber has increased with 3% and 11% in the 20cm and 30cm ridge height compared to 10cm ridge(515kg/10a).

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.4
• /
• pp.233-237
• /
• 2011

This study was carried out to investigate the seedling establishment and yield of direct-sown Platycodon grandiflorus seeds cultured by three ridge width, 0.4, 0.8, and 1.2 m and four mulching materials, rice straw, rice bran, black plastic film, and no mulching in upland. Seedling establishment rate (70%) was the highest in rice straw mulched plot of 500 seeds/$m^2$ sowed and root yield after one year was also the highest in rice straw mulched treatment and followed by rice bran, no mulching, and black plastic film treatment. In this result, ridge width 120cm and rice straw mulching combined treatment was best for getting the highest seedling establishment ratio and seedling numbers per area. However, ridge width and mulching materials should be considered soil moisture content and weed population for saving labor cost.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.22-31
• /
• 2005

To evaluate growth adaptation of the soybean in paddy field, five soybean cultivars were grown in Yeoncheon with two cultivating methods, level row and high ridge. Growth characters of the top plants, such as stem lengths, numbers of branches, diameters of stem, were higher under high ridge than under level row. However, the differences among the cultivars were bigger than those between the cultivation methods in each cultivar. Comparing the growth of top plants, dry matters in level row were higher than those in high ridge in V5 stage, however, via verses as growth progressed with significant differences among the cultivars. Roots were more developed under high ridge than those under level row during whole growth stages, such as V5, R2, and R5 stages. T/R ratio in level row was significantly higher than that in high ridge with significant differences among the cultivars.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.39-44
• /
• 1994

This study was carried out to investigate features pertaining to spiral thickenings, which was considered one of the most important diagnostic values, for wood identification. Species, kind of cells with spiral thickening, and ridge numbers of spiral thickening per axial mm were recorded in 71 families, 144 genera, 316 species of Korean hardwoods. Spiral thickening was observed in 128 of 316 species, about 40.5 % of all the investigated, and classified into 6 types on the basis of distributional patterns and morphological features as follows: 1. Type 1, present throughout all vessel element, which was found in 14 families, 19 genera, 43 species. 2. Type 2, present only in small vessel element, which was found in 18 families, 29 genera, 41 species. 3. Type 3, present both in small vessel element and wood fibers, which was found in 8 families, 17 genera, 29 species. 4. Type 4, present in wood fibers, which was found in 1 family, 1 genus, 1 species. 5. Type 5, present only in tail of vessel element, which was found in 4 families, 5 genera, 9 species. 6. Type 6, being present in vessel element faintly or partially, which was found in 2 families, 3 genera, 5 species.

• Journal of Periodontal and Implant Science
• /
• v.52 no.1
• /
• pp.3-27
• /
• 2022

Purpose: This study was conducted to evaluate and compare the effects of different graft materials used in alveolar ridge preservation on dimensional hard tissue changes of the alveolar ridge, assessed using cone-beam computed tomography (CBCT) scans. Methods: A systematic electronic search of MEDLINE and the Cochrane Central Register of Controlled Trials and a manual search were conducted from November 2019 until January 2020. Randomized controlled trials were included if they assessed at least 1 variable related to vertical or horizontal hard tissue changes measured using CBCT scans. After a qualitative analysis of the included studies, subgroups were formed according to the graft material used, and a quantitative analysis was performed for 5 outcome variables: changes in vertical alveolar bone height at 2 points (midbuccal and midpalatal/midlingual) and changes in horizontal (buccolingual) alveolar bone width at 3 different levels from the initial crest height (1, 3, and 5 mm). Results: The search resulted in 1,582 studies, and after an independent 3-stage screening, 16 studies were selected for qualitative analysis and 9 for quantitative analysis. The metaanalysis showed a significantly (P<0.05) lower reduction of alveolar ridge dimensions for the xenogenic subgroup than in the allogenic subgroup, both vertically at the midbuccal aspect (weighted mean difference [WMD]=-0.20; standard error [SE]=0.26 vs. WMD=-0.90; SE=0.22) as well as horizontally at 1 mm (WMD=-1.32; SE=0.07 vs. WMD=-2.99; SE=0.96) and 3 mm (WMD=-0.78; SE=0.11 vs. WMD=-1.63; SE=0.40) from the initial crest height. No statistical analysis could be performed for the autogenic subgroup because it was not reported in sufficient numbers. Conclusions: Less vertical and horizontal bone reduction was observed when xenogenic graft materials were used than when allogenic graft materials were used; however, the loss of alveolar ridge dimensions could not be completely prevented by any graft material.

• Journal of Korea Water Resources Association
• /
• v.30 no.4
• /
• pp.379-387
• /
• 1997

This study involves field monitoring of hydrlolgic characteristics of paddy fields under common irrigation practice, statistical analysis of maximum retention storage, determination of CNs for antecedent moisture conditions. Curve numbers were estimated from observed rainfall-runoff relationship of two years data. The estimated CN for AMC-II was 78, and the CNs for AMC-I and II were 63 and 88, respectively. A water balance model was used to find the effect of ridge height changes and initial ponding depth in paddy fields on runoff. The probability distribution of initial ponding depth was also investigated. The initial ponding depth follows normal probability distribution. Initial ponding depth corresponding 10%, 50%, and 90% probability were considered to be equivalent to AMC-I, AMC-II, and AMC-III, respectively. Long-term runoff data from paddy fields were simulated by a water balance model using recorded climate data, ridge height and estimated initial ponding depth derived from probability distribution. The estimated CNs using simulated runoff were 70, 79, and 89 for CN-I, CN-II, and CN-III, respectively.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.596-605
• /
• 2005

The cable dome, proposed by Geiger after developing Fuller's idea of tensegrity and improved by Levy, is a new type of large span space structures. In this paper, formulations of the initial forces distribution in members of two main systems of cable dome, which are Geiger dome and Levy dome, are presented. By analyzing the static performance of Levy dome and the variation of internal forces in members of the structure, four groups of design parameters in cable dome structure are represented in terms of: (1) the numbers of rings and the spaces between the rings; (2) the slopes of ridge cables; (3) the lengths of struts; (4) the initial force in one member of the structure.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.1
• /
• pp.109-117
• /
• 2000

The purpose of this study is to examine the effect factors in suburban rural landscape and significant factors of apartment complex which are effective to the skyline of the sloped mountains. Also it is to propose the basic resources to preserve and improve the suburban rural landscape. The target site is Young-In, which shows the typical of rural development. Sides were take in young-In City along the roads and selected for 20 pieces. This study used questionnaire about the suburban rural landscape surveying of 45 students in Kyunghee Univ.. Also we found 2 dependent variables and 8 independent variables totally. Moreover, we have analyzed the data using descriptive statistics, correlation analysis, and multiple linear regression method between the preference and physical factors, and between the vulnerability and perceptional factors. The results are as follows: 1) With the dependent variable of preference, the areas of "green space" and "agricultural productive lands" were highly influenced in the suburban rural landscape positively, but the areas of "apartment complex" and "other buildings" were negatively effected. 2) With the dependent variable vulnerability, the area "apartment complex" and cutting numbers of the "skyline of mountainous ridge" were proved as significantly positive factors, but the length of the "skyline of mountainous ridge" turned out to be a negative factor. Although this study has the difficulty to be generalized, it can be used for planning and designing of the apartment complex in suburban rural landscapes, and it will provide the basic guideline for preserving and managing of the suburban rural landscapes.uideline for preserving and managing of the suburban rural landscapes.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.5
• /
• pp.361-371
• /
• 2014

PURPOSE. In case of large horizontal discrepancy of alveolar ridge due to severe resorption, cantilevered crown is usually an unavoidable treatment modality. The purpose of this study was to evaluate the clinical criteria for the placement of the aforementioned implant crown. MATERIALS AND METHODS. The mandible model with 2 mm thick cortical bone and cancellous bone was fabricated from CT cross-section image. An external connection type implant was installed and cantilevered crowns with increasing offset of 3, 4, 5, 6, and 7 mm were connected. Vertical load and $30^{\circ}$ oblique load of 300 N was applied and stress around bone and implant component was analyzed. A total of 14 cases were modeled and finite element analysis was performed using COSMOS Works (Solid works Inc, USA). RESULTS. As for the location of the vertical load, the maximum stress generated on the lingual side of the implant became larger according to the increase of offset distance. When the oblique load was applied at $30^{\circ}$, the maximum stress was generated on the buccal side and its magnitude gradually decreased as the distance of the offset load increased to 5 mm. After that point, the magnitude of implant component's stress increased gradually. CONCLUSION. The results of this study suggest that for the patient with atrophied alveolar ridge following the loss of molar teeth, von-Mises stress on implant components was the lowest under the $30^{\circ}$ oblique load at the 5 mm offset point. Further studies for the various crown height and numbers of occusal points are needed to generalize the conclusion of present study.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.1
• /
• pp.76-84
• /
• 2015

This article reviews the topic of how to identify and develop a removable partial denture (RPD) path of placement, and provides a literature review of the concept of the RPD path of placement, also known as the path of insertion. An optimal RPD path of placement, guided by mutually parallel guide planes, ensures that the RPD flanges fit intimately over edentulous ridge structures and that the framework fits intimately with guide plane surfaces, which prevents food collecting empty spaces between the intaglio surface of the framework and intraoral surfaces, and ensures that RPD clasps engage adequate numbers of tooth undercuts to ensure RPD retention. The article covers topics such as the causes of obstructions to RPD intra-oral seating, the causes of food collecting empty spaces that may exist around an RPD, and how to identify if a guide plane is parallel with the projected RPD path of placement. The article presents a method of using a surgical operating microscope, or high magnification (6-8x or greater) binocular surgical loupes telescopes, combined with co-axial illumination, to identify a preliminary path of placement for an arch. This preliminary path of placement concept may help to guide a dentist or a dental laboratory technician when surveying a master cast of the arch to develop an RPD path of placement, or in verifying that intra-oral contouring has aligned teeth surfaces optimally with the RPD path of placement. In dentistry, a well-fitting RPD reduces long-term periodontal or structural damage to abutment teeth.