• 한국응용곤충학회지
• /
• 제30권1호
• /
• pp.50-53
• /
• 1991

이화명나방 유충을 방제할 목적으로 이화명충이 가해한 벼 줄기에 곤충병원성선충인 Steinernema carpocapsae와 Heterorhabditis bacteriophora를 살포한 결과 효과가 좋았다. 8cm 길이의 벼 줄기 2본에 S. carpocapsae 250, 500, 1,000, 2,000마리/ml를 살포한 결과 68.6$\pm$10.0~94.9$\pm$2.6%의 치사율을 얻었으며 H. bacteriophora 100, 200, 400, 800마리 ml살포구에서는 91.4$\pm$0.7~100%의 방제를 얻었다. 그러나 3본의 벼줄기를 H.bacteriophora 현탁액에 침적한 경우는 100마리/ml 구에서는 42.6$\pm$4.7%, 200마리/ml구에서는 63.1$\pm$4.7%로 선충의 현탁액을 살포하는 것보다는 치사율이 낮아 효과가 적었다. 벼 줄기는 선충의 생존과 기주 탐색에 좋은 환경을 유지해 주어 곤충병원 성선충은 이화명충의 방제에 유용한 생물적 인자로 확인 되었다.

• Journal of Biosystems Engineering
• /
• 제16권1호
• /
• pp.37-48
• /
• 1991

Rice plants are subjected to various forces such as natural force of wind and mechanical force of cultivating machines. Rheological behavior of the rice stem can be expressed in terms of three variables : stress, relaxation and time. The objectives of this study are to examine stress relaxation, creep and recovery characteristics on the rice stem in case of axial and radial loading. Stress relaxation with time was studied on three levels of loading rate and on four levels of applied stress. The results were summarized as follows : 1. The hysterisis losses of the rice stem distinctly observed at the radial compression in comparison with axial compression. The hysterisis loss implied that the stem to absorbed energy without being deformed beyond the yield point. 2. Ageneralized Maxwell model consisting of three elements gave a good description of the relaxation behavior of the rice stem. Rate of loading was more significant on the observed relaxation behavior within the short relaxation time, but there were little influences of rate of loading on the relaxation time. 3. The stress relaxation intensity and the residual stress increased in magnitude as the applied stress increased, but the relaxation time was little affected by the applied stress. 4. The coefficients of the stress relaxation model showed much differences in the radial compression and the axial compression, especially the higher relaxation stress of the third element was observed in the radial compression. 5. The behaviors of rice stem in creep and recovery test also might be represented by a four element Burger's model. But the coefficients of the creep model were different from those of the recovery model. 6. The steady-state phenomena of creep appeared at the stress larger than 20 MPa in Samkang and 1.8 MPa in Whajin. 7. The elastic modulus of the stem showed the range from 40 to 60 MPa. It could be considered, as a result, the rice stems had viscoelastic properties.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권1호
• /
• pp.133-152
• /
• 2022

Rice is a fundamental staple food commodity all around the world. Globally, it is grown over 167 million hectares and occupies almost 1/5^th of total cultivated land under cereals. With a total production of 782 million metric tons in 2018. In Pakistan, it is the 2^nd largest crop being produced and 3^rd largest food commodity after sugarcane and rice. The stem borers a type of pest in rice and other crops, Scirpophaga incertulas or the yellow stem borer is very serious pest and a major cause of yield loss, more than 90% damage is recorded in Pakistan on rice crop. Yellow stem borer population of rice could be stimulated with various environmental factors which includes relative humidity, light, and environmental temperature. Focus of this study is to find the environmental factors changes i.e., temperature, relative humidity and rainfall that can lead to cause outbreaks of yellow stem borers. this study helps to find out the hot spots of insect pest in rice field with a control of farmer's palm. Proposed system uses temperature, relative humidity, and rain sensor along with artificial neural network to predict yellow stem borer attack and generate warning to take necessary precautions. result shows 85.6% accuracy and accuracy gradually increased after repeating several training rounds. This system can be good IoT based solution for pest attack prediction which is cost effective and accurate.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1262-1262
• /
• 2001

The rice plant is one of the important staple crops in Korea. The high yield with low cost in rice is required the soil fertility and the development of new precise method of fertilizer application by nutritional diagnosis. Now, in Korea, the nitrogen application system for the rice plant is composed of the basal fertilization, fertilization at tillering stage and fertilization at panicle stage, which the nitrogen fertilization at panicle stage amount to about 30 percent in the total amount. Thus, this experiment carried out to the development of the system that can measure the nitrogen content in the rice plant at panicle stage rapidly with the near infrared spectroscopy, and to predict the appropriate quantity of the nitrogen fertilization at panicle stage based on calibration model for test of nitrogen content in rice plant. The samples were collected from 48 varieties in 4 regions which are mainly cultivated in the southern part of Korea. And then, it collected by classifying into the leaf, the whole plant and the stem since 7 days before the nitrogen fertilization at panicle stage. The ranges of the nitrogen contents were 1.6∼4.0%, 1.7∼3.0% and 1.4∼2.7% in the leaf, the whole plant and the stem, respectively. In the calibration models created by each part of the plant under the Multiple Linear Regression(MLR) method, the calibration model for the leaf recorded the relatively high accuracy. The mutual crossing test on unknown samples were carried out using Partial Least Square(PLS) calibration model. That is, the nitrogen content in the stem was tested by calibration model made by the leaf model and that of stem was tested by calibration model made by whole plant sample. When unknown leaf sample was tested by calibration model made by all sample that collected from each part in rice plant such as leaf, stem and whole plant, it recorded the highest accuracy. As a result, to test the nitrogen content in the rice plant at panicle stage, the nitrogen content in the leaf shall be tested by the calibration model composed of the leaf, the stem and the whole plant. In future, to estimated the amount of nitrogen fertilization at panicle stage for rice plant , it will be calculated based on regression model between rice yield and nitrogen content of leaf measured by calibration model made by mixed sample including leaf, stem and whole plant.

• 한국버섯학회지
• /
• 제15권1호
• /
• pp.21-24
• /
• 2017

표고, 느타리, 큰느타리, 팽이, 노루궁뎅이 수확 후 배지에 균사 생장과 밀도를 조사한 결과, 대조구에서 균사 생장이 72 mm/20일이나 처리구에서 느타리 수확 후 배지 고춧대에서 73 mm/20일로 대조구보다 우수하였다. 균사 밀도도 대조구와 비슷한 양상을 나타내었다. 농산부산물 배지이용 버섯 균사생장과 밀도의 영향을 조사한 결과, 대조구 균사 생장이 74 mm/20일, 고춧대에서 101 mm/20일로 대조구보다 우수하였다.

• 한국작물학회지
• /
• 제54권1호
• /
• pp.29-35
• /
• 2009

The aim of the present study was to update the calibration that is used for the measurement of the total nitrogen content in the rice plant samples by using the visible and near infrared spectrum. Before the equation merge, correlation coefficient of calibration equation for nitrogen content on each rice parts was 0.945 (Leaf), 0.928 (Stem), and 0.864 (Whole plant), respectively. In the calibration models created by each part in the rice plant under the various regression method, the calibration model for the leaf was recorded with relatively high accuracy. Among of those, the calibration equation developed by Partial least squares (PLS) method was more accurate than the Multiple linear regression (MLR) method. The calibration equation was sensitive based on variety and location variations. However, we have merged and enlarged various of the samples that made not only to measure the nitrogen content more accurately, but also later sampling populations became more diversified. After merging, $R^2$ value becomes more accurate and significantly to 0.950 (L.), 0.974 (S.), 0.940 (W.). Also, after removal of outlier, R2 values increased into 0.998, 0.995, and 0.997. In view of the results so far achieved, Standard error of prediction (SEP) and SEP (C) were reduced in the stem and whole plant. Biases were reduced in the leaf, stem as well as whole plant. Slopes were high in the stem. Standard deviation reduced in the stem but $R^2$ was high in the stem and whole plant. Result was indicated that calibration equation make update, and updating robust calibration equation from merge function and multi-variate calibration.

• 한국작물학회지
• /
• 제41권6호
• /
• pp.625-633
• /
• 1996

파속 식물체 내에 있는 활성물질을 추출 분리하여 생물검정하고, 이들 작물의 경엽을 직접 pot에 시용하여 벼를 재배하였을 때 생육 및 수량 구성 요소에 미치는 영향은 다음과 같다. 1. 벼 유묘의 발근 및 생육을 촉진시키는 물질은 마늘의 염기성 분획과 대파, 양파, 부추 및 마늘의 약산성 분획에서 공통적으로 억제 물질보다 촉진물질의 활성이 높았으며 억제물질은 그 외 분획에서 활성이 높았다. 제 2엽초의 신장촉진 혹은 억제 물질은 공시한 파속 식물에는 내재하지 않았다. 2. 이앙 후 벼 유묘의 고사률은 이앙 당일에 비해 이앙 10일 전에 경엽을 시용한 처리가 높았고 특히 대파와 양파에 비해 부추와 마늘 시용구에서 높았다. 이앙 10일 전 동엽시용은 유효분얼수를 현저히 촉진시켰으며 특히 대파의 50g에서 400g까지, 양파의 50g에서 200g까지는 이삭입수의 증가도 나타나 표준시비구에 비해 수량 증가효과를 가져왔다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권6호
• /
• pp.824-830
• /
• 2008

Sodium hydroxide (SH) or ammonium bicarbonate (AB) were applied to rice straw to investigate the effects on histological change of stem tissue or cell wall before and after in sacco degradation using a scanning electron microscope (SEM) and a transmission electron microscope (TEM). The SEM revealed that, the parenchyma and vascular bundles were distorted by treatment with SH at 30 or 45 g/kg straw dry matter. Faultage between phloem of large vascular bundles and parenchyma occurred with further increasing SH to 60 or 75 g/kg. The cell wall in these stem tissues was crimped when observed by TEM. However, only parenchyma and large vascular tissues were slightly distorted in AB-treated stem. For untreated and AB-treated stems, the initiation of observable ruminal degradation of cell wall was prolonged from 12 h for inner parenchyma to 24 h for sclerenchyma and to 48 h for phloem of small vascular bundles, while the outer epidermis was intact even at 72 h. For SH-treated stem, however, the cell wall from all of the investigated tissues, epidermis, small vascular bundles, sclerenchyma, and parenchyma started to be degraded at 12 h incubation. These results indicate that SH treatment contracts rice straw stem leading to an improvement in rumen degradation, and that the degradation of SH-treated stem is bilateral from inner and outer surface simultaneously.

• 한국응용곤충학회지
• /
• 제2권
• /
• pp.38-43
• /
• 1963

1) 본 시험은 1962년과 1963년의 2개연에 걸쳐 수원과 김해에서 이화명충방제를 위하여 수종의 공시농약과 비교 실시하였다. 2) $\gamma-dol$의 시용은 건사동율 혼합하여 손으로 수면에 시용하고 액제(Lebaycid Dipterex. B. H. C기타)는 분무기로 약면에 살포하였다. 3) 본 시험의 결과에 나타난 바에 의하면 타 약제에 비하여 $\gamma-dol$이 유효하였으며 수면시용시기는 부화 10일이내에 가장 효과적이었다. 4) 수원과 김해의 양지역에서의 시험결과를 비교해 보면 $\gamma-dol$ 지역적 효력차가 없는 것 같다.

• 한국농공학회논문집
• /
• 제53권2호
• /
• pp.61-65
• /
• 2011

Biomass is considered to be a major potential fuel and renewable resource for the future. In fact, there is high potential to produce the large amount of energy from biomass around the world. In this study, to obtain basic data for practical application of agricultural and forest by-products as fuel of heating system in agriculture, agricultural and forest biomass resources were surveyed, the pelletizer with capacity of $50\;kg{\cdot}h^{-1}$ was designed and manufactured and pellets were made by the pelletizer. High heating value, ash content, etc. of pellets made of agricultural and forest by-products were estimated. Straw of rice was the largest agricultural biomass in 2009 and the total amount of rice straw converted into energy of $299{\times}10^3$ TOE. And in 2009, amount of forest by-product converted into energy of $9,579{\times}10^3$ TOE. High heating values of pellets made of stem and seed of rape, stem of oat, rice straw and rice husk were 16,034, 16,026, 16,089, 15,650, $15,044\;kJ{\cdot}kg^{-1}$ respectively. High heating values of pellets made of agricultural by-products were average 83.6% compared to that of wood pellet. Average bulk density of pellets made of stem and seed of rape, stem of oat, rice straw and rice husk was $1,400\;kg{\cdot}m^{-3}$ ($1.4\;g{\cdot}cm^{-3}$). Ash contents of the pellets were 6.6, 7, 6.2, 5.5, 33% respectively. Rice husk pellet produced the largest ash content compared to other kinds of pellets.