• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.4
• /
• pp.281-287
• /
• 2013

Due to its high salt content and poor physical properties in reclaimed tidal lands, it is important to ameliorate soil physical properties to improve the efficiency of desalination. The objective of this study was to evaluate the changes of soil properties at Saemangeum reclaimed tidal saline soil with various soil amendments. Field experiment was conducted at Saemangeum reclaimed tidal land in Korea and the dominant soil series was Munpo series (coarse loamy, mixed, nonacid, Mesic, Typic, Fluvaquents). Woodchips, crushed-stone, oyster shell, coal bottom ash, and rice hull were added as soil amendments and mixed into surface soil to improve soil physical properties. There was large variability in soil hardness, but oyster shell treatment was significantly lower soil hardness at surface layer. Soil hardness was not significantly different below 15 cm depth. Infiltration rate was also significantly greater at oyster shell treatment. This may be due to the leaching of Ca ions from oyster shell and improved soil properties. However, there was no statistical significant difference of the soil bulk density, moisture content, and porosity. Improved physical properties increased desalinization rate in soil and retarded the resalinization rate when evapotranspiration rate was high. Although soil salinity was significantly decreased with oyster shell amendment, soil pH was increased that should be made up as a soil amendment. Our results indicated that oyster shell application increased infiltration rate and improved soil hardness, and thus oyster shell could be used to improve soil salinity level at Saemangeum reclaimed tidal saline soil.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.45-50
• /
• 2001

Stem firmness and flowering response of cut lily as influenced by medium composition (Control: Upland soil, Pt: Peatmoss, Pe: Perlite, Ve: Vermiculite, Rrh: Rotted rice-hull, RPt: Russian Peatmoss) were studied. For 'Casa Blanca', plant height and length of flower stalk increased when bulbs were planted in Pt:Rrh:Ve(1:1:1, v/v), and dried leaves of lower part plants decreased by RPt:Pe:Rrh(1:1:1, v/v). In case of 'Marco Polo' plant height and length of flower stalk increased with Pt:Rrh(1:1, v/v) as compared to other treatment, number of leaves and dried leaves increased when bulbs were planted in RPt:Pe:Rrh(1:1:1, v/v) as compared to control. Flowering of 'Casa Blanca' was promoted in Pt:Pe:Ve(1:1:1, v/v) and 'Marco Polo' was accelerated in Pt:Rrh:Ve(1:1:1, v/v). Flower length of 'Casa Blanca' was increased by RPt:Pe:Rrh(1 :1 :1, v/v) as compared with control and 'Marco Polo' was increased when bulbs planted to Pt:Rrh(1 :1, v/v). Flower-bud blasting of two cultivars was increased with Pt as compared with other treatment. Stem firmness of 'Casa Blanca' was increased by Pt:Pe:Ve (1:1 :1, v/v), and especially, stem firmness of upper part plants was increased by Pt:Rrh(1 :1, v/v) in 'Marco Polo' as compared to control plants. but generally, stem firmness of 'Casa Blanca' was not influenced with all cultural media as compared to control.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.1
• /
• pp.35-40
• /
• 2018

${\gamma}$-Aminobutyric acid (GABA) has antihypertensive and anti-stress effects on humans. The present study aimed to investigate the effect of glutamate concentration, bran content, and barley cultivars on GABA production and determine the optimal reaction condition. Barley bran resulted in higher GABA productivity compared with that of rice bran. The higher the bran content, the higher was the GABA productivity. Furthermore, high glutamate concentration resulted in high GABA production. However, there was a decrease in the glutamate conversion rate. The production of GABA varied with temperature and barley cultivar. The optimal condition for GABA production using barley bran was 0.15 g/mL barley content, 10 mM glutamate concentration, and $20^{\circ}C$ reaction temperature. Under optimal condition, the GABA concentration was 10.34 mM, and glutamate conversion rate was 75.1%. Furthermore, the GABA productivity of the GABA production reaction using barley bran differed depending on the cultivar. Dasong and Yeongbaekchal showed higher GABA productivity than that by other cultivars.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.14-19
• /
• 1994

Elephant food(Amorphophallus konjac K.) have been utilized its tubers in workedmaterials for a health and diet food. The author supposed that it was increased the area of cultivation and demand. This experiments were conducted to select the proper covering material during winter in order to increase yield of tubers and decrease input by 2 year's continuous cultivation, also to verified ability of seed germination and to measured efficiency of photosynthesis of plant. The proper covering materials for wintering were rice straw and rice hull. These materials were covered at 5 cm thick and at field was promoted according to emergence appearing after winter. The yields were 5,790kg /10a at 4,730kg /10a, respectively. Yield increase was 120% and 80% than that of control. The seeds collected at August 22 were germinated about 84 percent, and it was not necessary to treatment of low temperature or germination-accelerated chemicals. The widest leaf area was ranged $1,218-1,438cm^2$ at October 20 and was varied. The efficiency of photosynthesis was highest at 65-95 days after leaf emergence. The line of broad leaf and high photosynthetic efficiency per unit area was greater compare with yield. Therefore, it was supposed that these characteristics will use a marker for selection for high-yielding lines.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.81-87
• /
• 2019

The investigation of mycelial growth for artificial cultivation in T. albuminosus determined that within PDA, YM, MEA medium, both KNCAF 9001 and 9002 strains showed the highest mycelial growth in MEA media with 89, 81 mm, respectively, followed by YM, PDA in respected order. Furthermore, optimal mycelial growth of 89 and 77 mm in 9001 and 9002, respectively, at 25 ℃. Mycelial growth rapidly decreased at 30 ℃, but it was confirmed that it survived at 40 ℃. At pH 6, mycelial growth was fast with growth of 89 and 88 mm for both 9001 and 9002, respectively. In the case of 9001, the addition of with cotton seed hull(80%) and rice bran (20%) each other resulted in maximum productivity of 99 mm/10 days. The result differed in order of corn cob(97 mm), oak sawdust(96 mm) and poplar sawdust(93 mm). Ultimately, the result confirmed that addition of rice bran in comparison to bran resulted in higher yield. Even with identical medium component, 9002 showed the same tendency as 9001 but its growth was relatively slower than 9001. The effect of mycelial growth on the moisture content of the medium was best at 101. 94 mm/10 days when the moisture content of 9001 and 9002 was 65%. Mycelial growth rate tended to be slower when the moisture content was higher or lower than 65%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.11-18
• /
• 2018

Biochar is a carbon-rich solid product obtained by the pyrolysis of biomass. It has been suggested to mitigate climate change through increased carbon storage and reduction of greenhouse gas emission. The objective of this study was to evaluate carbon dioxide ($CO_2$) and nitrous oxide ($N_2O$) emissions from soil after various biochars addition. The biochars were produced by pyrolysing pear branch, rice hull and bean straw at $400{\sim}500^{\circ}C$. The treatments were consisted of a control without input of biochar and three type biochars input as 5.0 Mg/ha. Emissions of $CO_2$ and $N_2O$ from upland soil were determined using closed chamber for 8 weeks at $25^{\circ}C$ of incubation temperature. It was shown that the cumulative $CO_2$ were 207.1 to $255.2g\;CO_2/m^2$ for biochar input treatments and $258.6g\;CO_2/m^2$ for the control after experimental periods. The cumulative $CO_2$ emission was slightly decreased in biochar input treatment compared to the control. It was appeared that cumulative $N_2O$ emissions were $2,890.6mg\;N_2O/m^2$ for control, 379.7 to $525.2mg\;N_2O/m^2$ for biochar input treatment at the end of experiment. All biochar treatments were found to significantly reduce $N_2O$ emission by 82~87%. Consequently the biochar from byproducts such as pear branch, rice hull and bean straw could suppress the soil $N_2O$ emission. The results from the study imply that biochar can be utilized to reduce greenhouse gas emission from the upland field.

• Journal of Bio-Environment Control
• /
• v.26 no.1
• /
• pp.43-48
• /
• 2017

This experiment was conducted to test the suitability of various organic materials in order to reduce the use dependence of peatmoss as a soil pH regulator and to examine the effect of soil organic matter supply. A 2-year old northern-highbush blueberry (Vaccinium corymbosum L.) 'Duke' plants were planted in the field at $2.0m{\times}2.5m$ spacing in spring. Before planting, organic materials were incorporated into the soil including the planting hole at 20 liter per plant, as the following mixtures: peatmoss only (20 L), peatmoss (10 L) + pine needle (10 L, PN), peatmoss (10 L) + rice hull (10 L, RH), and peatmoss (10 L) + sawdust (10 L, SD). The pH of organic materials was lowest in peatmoss (pH 4.3), followed by PN (pH 4.8), SD (pH 5.7) and RH (pH 7.8). Soil pH measured right after planting ranged from 5.3 to 5.9 and was lower in PM only and PM + PN than PM + RH and SD treatments. In the third year, the pH lowered to the range of 4.2 to 4.5, with PM and PM + PN still maintaining lower values. The early growth was good in the mixed treatment of PM and PN, and the plant height and width and the number of new shoots were good in the PM treatment. Soil water content was maintained highest in PM + PN, followed by PM, PM + SD and PM + RH. Vegetative growth was maintained better in PM and PM + PN, and the number of flower cluster and yield were also slightly higher in those treatments while mean fruit weight was similar among all treatments. Fruit quality indices such as total soluble solids, titratable acidity and firmness were not affected.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.2
• /
• pp.136-151
• /
• 1984

The purpose of this study is to find out the linkage relationship of the resistance genes Wbph1 and Wbph2 which are known to be present in the rice cultivar N22 and ARC 10239 respectively, with the genetic markers which are identified as the specific linkage tester. Crosses were made between the resistant parents and the genetic marker stocks and their F$_2$ populations were grown out in the field. The genetic segregations of the marker character were studied and the seeds were harvested individual plant base. These F$_3$ seeds were grown into plant-line base in the greenhouse and their responses to the whitebacked planthopper were tested. Then the linkage relationship between the F$_2$ plant marker character and the F$_3$ resistance responses to the whitebacked planthopper were examined. In the F$_2$ generation of the crosses between the resistant parent N22 and the genetic marker stocks, the genetic markers, such as lg, d-t, g, la, bl and gl, showed the segregation of 3 dominance to 1 recessiveness, and the Bh marker segregated into 9:7 ratio. Another 4 marker genes, such as Cl, gh, Lh and bc, did not show the good fittness to the expected value. In the F$_2$ generation of the crosses between the resistant parent ARC 10239 and the genetic marker stocks, the genetic markers, such as Cl, lg, Pn, g, la, bl and gl, showed the segregation of 3 dominance to 1 recessiveness, and the Bh gene segregation fitted well to the 9:7. The rest 4 genetic markers, such as gh, Lh, nl and be, did not show the good fitness to the expected ratio. The resistance genes Wbphl of N22 and the Wbph2 of ARC 10239 appeared to be single dominant gene each. The Wbphl gene was linked with the marker gene, liguleless (lg) of linkage group II with the recombination value of 36.8%, and with the black hull (Bh) with the value of 35.9%. The Wbph2 gene appeared to be independent of all the markers tested here, such as Cl, lg, Pn, g, Lh, la, nl, bl, bc, gl, Bh, of linkage gtoup I, II, III, IV, VI, VII, VIII, IX, X, XI, and XII respectively. That the Wbph2 linkage relations were not investigated was regarded as the causes that the tested marker genes on the chromosome were located with the resistance gene at the distant loci, and of the phenctypic properties of the marker characters. The Wbph2 linkage relations should be reexamined in the cross combinations of linkage group Ⅶ, Ⅷ, Ⅹ and XII including linkage group V which was not tested in this experiment.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.9-19
• /
• 1995

This study was carried out to investigate the effect of sawdust bedding barn on manure handing, management labour and physiological aspect of dairy cows, and then to establish the criteria on the optimum utilization method of sawdust bedding barn. 46 tie stall barns and 49 sawdust bedding barns were surveyed to cmopare the milk productivity between two different barns, and also 5 tie stall barns, 15 sawdust bedding barns and 1 rice hull bedding barn were selected to study the utilization situation of sawdust barn in Kyung-Ki province area. The major results obtained were as follows; 1. The roof material of sawdust barn were consisted of 66% vinyl house, 23% PVC light and 11% slate and galvanum coated tin. Most of the floor structure was earth ground with the rate of the approximately 82%. 2. The average occupied area of sawdust bed per cow was 15.2 $m^2$, depth that 30 cm and the utilization period was 12 months. 3. Milk Yield was significantly higher at sawdust barn than at tie stall barn(P<0.01). Bacterial and somatic cell count in raw milk were less at the sawdust barn than in tie stall barn. However, there was not significance difference between two barns. 4. The labour hour needed to cow management in the sawdust barn was approximately 48% of that of tie stall barn. 5. The temperature and moisture content measured in sawdust bed were closely affected by seasonal ambient temperature. The skin and hair of cow were much cleaner at the PVC light roofed sawdust barn than any other roof materials. 6. The additives used for improving of fermentation did not show any effect on temperature and moisture content in sawdust bed. When the ambient temperature was $30.4^{\circ}C$, the surface temperature of measured 1 cm above the sawdust bed was $12.2^{\circ}C$ lower and the temperature of 100 cm above the sawdust bed was $2.4^{\circ}C lower under shading net facility than that of vinyl roofed one.7. The hoof length of miking cow was 7.95 cm in tie stall and 9.19 cm in sawdust barn with high significance (P<0.01). And disease occurence such as mastitis and foot-rot tended to decrease in the sawdust barn. 8. The number of total bacteria and coliform bacteria were less in the sawdust bed compared with earth ground resting area. And a parasite strongyloides papillosus was detected but without any infected cow. 9. The nitrate($NO_3N$) content in non-roofed earth ground resting area and earth ground under the sawdust bed was likely to pollute the ground water. 10. In economic point of view, rice hull bedding barn was the cheapest among different systems. And in the sawdust bedding barn PVC light + slate roofed barn was most desirable, and vinyl roofed one the least.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.558-564
• /
• 2013

The objective of this research was to secure the fundamental information in changes of soil physical properties as influenced by the compaction of root media during container filling. Three root media were formulated by blending peatmoss (PM) with expanded rice hull (PM + ERH, 8:2, v/v), carbonized rice hull (PM + CRH, 6:4) and ground and aged pine bark (PM + GAPB, 8:2). Based on the optimum bulk density, the amount of root media filled into 6.0, 7.5, 8.5, 10.5 and 12.5 cm were adjusted to 90, 100, 110, 120, and 130%, then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) were measured. The TP decreased significantly as the packing amount of three root media were elevated in all sizes of container. The TP did not show significant differences among the root media in small sizes of containers, but showed significant differences when sizes of containers became larger. As packing amount of three root media were elevated, the CCs in all sizes of containers were decreased. The PM + CRH had the lowest CC among three root media in containers smaller than 8.5 cm, but had the highest CC in those larger than 10.5 cm. These results indicated that the decreases in CC were influenced by the sizes of containers as well as kinds of root media. The elevation of packing amount in three root media diminished significantly the AFP. The AFP in PM + GAPB medium was two times as high as those of PM + ERH or PM + CRH when equal packing densities were applied in all sizes of containers. As the container sizes became larger in three root media, the extents in decreasing of CC were distinct than those of AFP. Above results indicate that elevation in packing amount of three root media decreased significantly the TP, CC and AFP, but these were influenced differently by sizes of containers and kinds of root media. The results would be useful for expectation in the changes of physical properties in various sizes of containers filled with peatmoss based root media.