• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.41-51
• /
• 2018

In case of evaluating the bond stress of a void deck plate using a wire steel, there is no standard formula considering both the influence on the void and the type of the reinforcing bar. Therefore we proposed a model equation considered the bond characteristics of the void deck plate. A total of 46 specimens was carried out a direct pull-out test and the test variables were the presence of a void body, type of reinforcing bar, the inner cover thickness according to the location of reinforcing bars and bond region. As a result of the comparison between the steel bar and steel wire, the bond stress of the steel wire with the relative rib area of 0.071 is 4.5 ~ 28.58% lower than that of the steel bar with 0.092 and the bond stress reduction rate increases when the inner cover thickness is insufficient. In the case of the inner cover thickness of $1.7d_b$ and $2.7d_b$, the bond stress was reduced to 48.7 ~ 68.4%. In the inner cover thickness was $4.9d_b$ and $5.2d_b$, the bond stresses were equivalent to those of the solid specimens. It was confirmed that the average bond stress and strain were affected by the inner cover thickness. Therefore the predicted model for one module of the void deck plate is proposed and verified by considering the bond characteristics of the void deck plate.

• Journal of Chest Surgery
• /
• 제54권6호
• /
• pp.539-542
• /
• 2021

Resection and reconstruction of the chest wall for the radical surgical treatment of malignant soft tissue tumors are currently considered a substantial challenge for thoracic surgeons. We present an unusual case of infantile fibrosarcoma with tropomyosin 3-neurotrophic receptor tyrosine kinase 1 fusion in a 13-year-old patient. The surgical treatment consisted of radical resection of the right posterior chest wall and reconstruction with the use of the STRATOS (Strasbourg Thoracic Osteosynthesis System) titanium rib bridge system. The patient had a favorable postoperative course and received respiratory-ventilatory rehabilitation, adjuvant therapy with chemotherapeutic agents, immunotherapy, and radiotherapy.

• Journal of Trauma and Injury
• /
• 제31권1호
• /
• pp.12-15
• /
• 2018

Rib fixations for flail chest or displaced rib fractures are not a new technique. However, reports on rib fixations involving costal cartilage fractures are very few and surprisingly there are no reports of internal fixations involving only the costal cartilage in the English literature. The diagnosis is difficult and the necessity of the procedure may be quite controversial. Placing plates in screws into the costal cartilage alone may seem unstable and easily dislodged or stripped through the cartilage. We report a 31-year-old male scuba diver instructor who underwent rib fixations over his 7th and 8th costal cartilage ribs for severe pain. The procedure was done with conventional plates and screws. He had the plates and screws removed 2 months later due to lingering pain, but with them removed he is now quite happy with the results without pain. The procedure for fixation of painful overlapped costal cartilage is quite simple and can be done with the usual conventional methods, fixating plate and screws directly over the cartilage alone without fixation over the bony rib.

• 한국강구조학회 논문집
• /
• 제12권3호통권46호
• /
• pp.239-250
• /
• 2000

본 연구에서는 강바닥판의 실물 대형시험체를 제작하여 정적시험 및 피로시험을 실시하였다. 정적 및 영향면 재하시험 결과를 통하여 다이아프램의 유무에 따른 강바닥판 슬릿부의 면내와 면외응력을 검토하였으며, 피로시험결과로부터는 강바닥판의 피로거동, 피로균열의 발생과 진전에 대한 연구를 수행하였다. 다이아프램이 설치된 상세는 설치되지 않은 상세에 비하여 지점조건에 상관없이, 종리브 횡리브 교착부의 종리브측으로는 약 50%의 응력경감효과가 있으나, 횡리브측 하단부에는 오히려 상당히 큰 응력을 야기함을 알 수 있었으며, 피로균열 진전해석결과로부터는 슬릿부의 노치에 의한 초기균열길이가 피로균열성장에 상당한 영향을 끼치고 있음을 알 수 있었다. 측정자료와 FEM 해석을 통하여 공칭응력과 핫스폿응력에 의한 피로강도를 추정한 결과, 다이아프램이 설치되지 않은 상세는 규정된 피로등급에서 안전한 것으로 판단되나 다이아프램이 설치된 상세는 피로등급이하의 거동을 보였다.

• Design & Manufacturing
• /
• 제16권4호
• /
• pp.24-33
• /
• 2022

Fiber-reinforced plastics(FRPs) have excellent specific stiffness and strength, so they are usually used as automotive parts that require high rigidity and lightweight instead of metal. However, it is difficult to predict the mechanical properties of injection molded parts due to the fiber orientation and breakage of FRPs. In this paper, the fiber orientation characteristics and mechanical properties of injection molded specimens were evaluated in order to fabricate automotive transmission side covers with FRPs and design a rib structure for improvement of their rigidity. The test molds were designed and manufactured to confirm the fiber orientation characteristics of each position of the injection molded standard plate-shaped specimens, and the tensile properties of the specimens were evaluated according to the injection molding conditions and directions of specimens. A gusset-rib structure was designed to improve the additional structural rigidity of the target products, and a proper rib structure was selected through the flexural tests of the rib-structured specimens. Based on the evaluation of fiber orientation and mechanical characteristics, the optimization analyses of gate location were performed to minimize the warpage of target products. Also, the deformation analyses against the internal pressure of target product were performed to confirm the rigidity improvement by gusset-rib structure. As a result, it could be confirmed that the deformation was reduced by 27~37% compared to the previous model, when the gusset-rib structure was applied to the joining part of the target products.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.375-376
• /
• 2006

Turbulent structure of a boundary-layer over a flat plate coated with micro riblet film(MRF) has been investigated experimentally. The turbulent structure was visualized using a dynamic particle image velocimetry (Dynamic PIV) system. We identified the vortex structures from 2-D velocity field data by applying the complex eigenvalue definition. The velocity field images acquired by using the complex eigenvalue definition showed the whole 2-D vortex structures clearly. In addition, the spatial distributions of small-scale vortices as well as large-scale vortices were obtained with high accuracy. The difference of vortex structures between the MRF coated flat plate and the smooth flat plate was analysed in detail. With varying upstream flow speed, the characteristics of vortex structure over the MRF coated flate plate was compared with those over the smooth flat plate.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.563-574
• /
• 2006

본 연구에서는 개단면 리브를 갖는 보강판에 대하여 재하 크기가 보강판의 처짐에 미치는 영향을 살펴보고, 직교이방성 강성비를 매개변수로 하여 이를 정형화하고자 하였다. 재하 크기에 따른 보강판의 처짐 양상을 살펴보기 위하여, 집중하중과 3가지 크기의 등분포 하중을 판의 중앙에 위치한 리브 위에 작용시켜 해석하였다. 여러 가지 보강판에 대한 분석 결과, 집중하중에 대한 분포하중의 중앙점 처짐 비율은 재하 크기가 작을수록 크게 나타남을 알 수 있었으며, 이러한 처짐 비율은 리브 간격별로 강성비의 함수로 표현할 수 있음을 알 수 있었다. 또한, 분포하중 작용시 보강판의 최대 처짐은 국부 처짐의 발생으로 중앙점이 아닌 위치에서 발생하며, 중앙점 처짐에 대한 최대 처짐의 증가 비율은 리브 간격별로 강성비의 함수로 표현할 수 있음을 알 수 있었다. 본 연구에서 제안한 함수식을 직교이방성 판 해석에 적용한 결과 정확도의 향상을 나타내었으며, 또한 변장비 및 지지 조건이 다른 경우에 적용한 결과 타당한 결과를 나타내어, 본 연구에서 제안한 함수식을 이용하면, 직교이방성 판 해석시 간편하게 분포하중을 받는 보강판의 중앙점 처짐과 최대 처짐을 산정할 수 있을 것으로 판단된다.

• 한국군사과학기술학회지
• /
• 제15권3호
• /
• pp.350-357
• /
• 2012

The velocity response of stiffened rectangular plate under high velocity impact was studied. Numerical simulation was conducted on the stiffened plate with four stiffeners under various impact positions. Considered stiffener types were rib, I, hat and T stiffener. For the center impact position of I stiffened plate, the simulated residual velocity was 365.6 m/s with the initial projectile velocity 500 m/s. The reinforcing characteristic of I stiffened plate was excellent among four stiffeners.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1849-1851
• /
• 1999

The PDP(Plasma Display Panel) barrier rib was fabricated by focused $Ar^+$ laser ($\lambda$=514nm) and Nd:YAG($\lambda$=532, 266 nm) laser irradiation. The depth of the etched groove increases with increasing a laser fluence. and decreasing a scan speed. Using the second harmonic of the Nd:YAG laser, the threshold laser fluence was $6.5mJ/cm^2$ for the sample of PDP barrier rib dried at $120^{\circ}C$. The thickness of $150{\mu}m$ of the sample on the glass was etched without any damage on the glass substrate by fluence of $19.5J/cm^2$. The barrier rib sample on hot plate was etched by Nd:YAG laser(532 nm) as increasing a temperature of the sample. In this case, the etch rate was $95{\mu}m/s$, $190{\mu}m/s$ at room temperature, $175^{\circ}C$ respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.280-287
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics inside the rib-roughened cooling passage of the gas turbine blades. A square duct with rectangular ribs is used and $\wedge-$ and V-shape ribs with $60^{\circ}$ attack angle are installed on the test plate surfaces. Naphthalene sublimation technique is employed to determine the detailed local heat transfer coefficients using the heat and mass transfer analogy. The ribs disturb the main flow resulting in the recirculation and secondary flows near the ribbed wall and the vortices near the side-wall. The local heat transfer and the secondary flow in the duct are changed largely according to the rib orientation. A square duct with $\wedge$ and V-shape ribs has two pairs of secondary flow because of the rib arrangement. So, the duct has complex heat/mass transfer distribution. The average heat/mass transfer coefficient and pressure drop of $\wedge-$ and V-shape ribs are higher than those with $90^{\circ}$ and $60^{\circ}$ attack angles. The average heat/mass transfer coefficient on the $\wedge-shape$ ribs is higher than that on the V-shape ribs. Also, the uniformity of heat/mass transfer coefficient on discrete ribs is higher than that on continuous rib.