• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.803-809
• /
• 2012

This study was carried out to evaluate the effects of whey ferment containing L. acidophilus KCCM 32820 and P. freudenreichii KCCM 31227 on the quality characteristics of white pan bread. Instrumental analysis such as alveograph, gelatinization temperature, texture analysis, retrogradation rate was determined. In an alveograph test, $P_{max}$ value in the treatment was higher than that in the control, but extensibility of dough in the control showed to be higher than in the treatment, so test dough showed more strength than the control. In terms of DSC analysis for gelatinization, temperature there were no significant differences of $T_p$ and ${\Delta}H$ between the control and the treatment. In hardness analysis by rheometer, dough containing whey ferment revealed lower values than the control. From the analysis of the organic acid contents, propionic acid was not detected in the control, however 1.13 mg/g of propionic acid was detected in the treatment. In the retrogradation analysis by DSC, the test delayed slightly compared to the control.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.235-245
• /
• 2008

The aim of this study was to develop a method for measuring the slumping resistance of resin composites and to relate it to the rheological characteristics. Five commercial hybrid composites (Z100. Z250. DenFil, Tetric Ceram. ClearFil) and a nanofill composite (Z350) were used to make disc-shaped specimens of 2 mm thickness. An aluminum mold with square shaped cutting surface was pressed onto the composite discs to make standardized imprints. The imprints were light-cured either immediately (non-slumped) or after waiting for 3 minutes at $25^{\circ}C$ (slumped). White stone replicas were made and then scanned for topography using a laser 3-D profilometer. Slumping resistance index (SRI) was defined as the ratio of the groove depth of the slumped specimen to that of the non-slumped specimen. The pre-cure viscoelasticity of each composite was evaluated by an oscillatory shear test and normal stress was measured by a squeeze test using a rheometer. Flow test was also performed using a flow tester. Correlation analysis was performed to investigate the relationship between the viscoelastic properties and the SRI. SRI varied between the six materials (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). The SRI was strongly correlated with the viscous (loss) shear modulus G' but not with the loss tangent. Also. slumping resistance was more closely related to the resistance to shear flow than to the normal stress. Slumping tendency could be quantified using the imprint method and SRI. The index may be applicable to evaluate the clinical handling characteristics of composites.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.235-245
• /
• 2008

The aim of this study was to develop a method for measuring the slumping resistance of resin composites and to relate it to the rheological characteristics. Five commercial hybrid composites (Z100, Z250, DenFil, Tetric Ceram, ClearFil) and a nanofill composite (Z350) were used to make disc-shaped specimens of 2 mm thickness. An aluminum mold with square shaped cutting surface was pressed onto the composite discs to make standardized imprints. The imprints were light-cured either immediately (non-slumped) or after waiting for 3 minutes at $25{\circ}C$ (slumped). White stone replicas were made and then scanned for topography using a laser 3-D profilometer. Slumping resistance index (SRI) was defined as the ratio of the groove depth of the slumped specimen to that of the nonslumped specimen. The pre-cure viscoelasticity of each composite was evaluated by an oscillatory shear test and normal stress was measured by a squeeze test using a rheometer. Flow test was also performed using a flow tester. Correlation analysis was performed to investigate the relationship between the viscoelastic properties and the SRI. SRI varied between the six materials (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). The SRI was strongly correlated with the viscous (loss) shear modulus G' but not with the loss tangent. Also, slumping resistance was more closely related to the resistance to shear flow than to the normal stress. Slumping tendency could be quantified using the imprint method and SRI. The index may be applicable to evaluate the clinical handling characteristics of composites.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.640-646
• /
• 2008

This study was conducted to evaluate the breadmaking characteristics of white bread when rice bran (RB), fermented rice bran (FRB) and rice bran oil (RBO) were added to the dough. Addition of RB to dough generally showed a decrease of the bread volume and increase of the bread weight which is related to the comparative decrease of gluten in the dough. Addition of RB also showed a decrease of lightness with yellowish color of RB and showed some rheological changes in dough. However, up to 5% RB addition, the dough showed a similar property of breadmaking with giving functional benefits compared to the control. Moreover 5% FRB addition to the dough improved the taste, flavor, and texture important to quality of bread. Substitutional use of RBO for shortening in dough result in comparative decrease of volume of dough. Addition of yellowish RBO influenced the increasing yellowness score, hardness, gumminess and brittleness, which is disadvantageous for the quality of white bread. However up to 50% RBO substitution for shortening made little rheological differences compared to the control. The 50% RBO substitution for shortening increased the score of flavor in sensory test even if there was an unfavorable quality point of white bread caused by a decreased volume and an increased hardness. From these results it could be suggested that the proper use of RB, FRB and RBO in breadmaking could improve the taste and flavor, giving beneficial function originated from rice bran to white bread.

• Culinary science and hospitality research
• /
• v.19 no.4
• /
• pp.119-135
• /
• 2013

This study investigates waxy barley powder substituted for wheat flour in bread recipes with the amounts of 0%(control), 5%, 10%, 15% and 20%. Waxy barley powder consisted of 8.33% of moisture content, 10.47% of crude protein, 1.63% of crude fat, and 2.97% of crude ash. Sedimentation value and pelshenke value have decreased as the waxy barley powder content increased. The farinograph measurement result of the bread made with waxy barley powder showed that consistency, water absorption, development time, stability and time breakdown have increased as the waxy barley powder content increased. The amylograph measurement result of the bread made with waxy barley powder showed that T have increased as the waxy barley powder content increased. Their P, H and P-H have decreased as the ingredient contents increased. Baking loss and specific loaf volume have decreased as the waxy barley powder content increased. The chromaticity measurement result of the bread made with waxy barley powder showed no significant difference as the waxy barley powder content increased. The texture measurement result showed that the hardness and gumminess of bread have increased as the waxy barley powder content increased. Their cohesiveness, springiness and chewiness have decreased as the ingredient contents increased. Overall preference scores showed a high acceptability for the bread made with 10% waxy barley powder.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.957-963
• /
• 2013

This study evaluated the quality characteristics of muffins prepared with different amounts (0%, 4%, 8%, or 12%) of apricot powder. The moisture content was higher in groups containing 8% and 12% apricot powder. The specific volume of muffins decreased as the amount of apricot powder increased. The lightness value was lower in groups containing apricot powder, with redness and yellowness values increasing with increasing amounts of apricot powder. Rheology tests showed no significant differences in hardness, springiness, and cohesiveness between control muffins and muffins with apricot added. Scanning electron microscopy showed that the number and size of air cells decreased with increasing levels of apricot powder. The substitution of wheat flour with apricot powder yielded muffins with a higher DPPH (1,1-diphenyl-2-picrylhydrazyl) radical-scavenging activity and total polyphenol content. Consumer acceptance tests revealed no significant differences in appearance, smell, and texture between muffin samples, but the taste and overall acceptability scores were lowest for muffins with 12% apricot added. Therefore, up to 8% apricot powder can be incorporated into muffins to meet the sensory quality and functional needs of the consumer.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.269-276
• /
• 1983

Experiments were performed to study the rheological and baking properties of bread fortified with various amounts of filefish protein concentrate (FPC). Doughs were prepared from mixtures containing wheat flour and 5,10,15 and 20% of FPC. Standard methods were used to evaluate the rheology of doughs and characteristics of bread. The results were as follows. 1. The water absorption of the fortified doughs increased as FPC increased. FPC caused an increase in development time and stability as measured by Farinograph. 2. In the extensigraph test, FPC yielded a decrease in extensibility and an increase in resistance to extension. 3. Baking tests demonstrated that addition of FPC decreased the volume of loaf and made the crumb darker and coarser. 4. Additional tests were made to examine effect of sodium stearoyl lactylate (SSL) added at 0.25, 0.50, 1.00 and 2.00% on doughs containing 10% headed & gutted FPC. The most appropriate amount of SSL as an additive was 0.5%. 5. In the farinograph, adding 0.5% SSL could delay dough development time and greatly increase stability. 6. When 0.5% SSL was added on doughs containing 5,10,15 and 20% headed & gutted FPC, baking quality was greatly improved. The breads containing up to 10% were acceptable by the addition of SSL, but not in higher level of FPC. 7. The results of sensory evaluations of bread showed that the color, texture and taste of bread containing 5% whole FPC and 5, 10% headed & gutted FPC were reasonably gacceptable.

• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.142-155
• /
• 2013

This study investigates perilla seed powder substituted for wheat flour in bread recipes with the amounts of 0%(control), 5%, 10%, 15%, and 20%. Perilla seed powder consists of 9.41% of moisture content, 9.14% of crude protein, 1.12% of crude fat, and 2.97% of crude ash. Sedimentation value and pelshenke value have decreased as the perilla content increased. The farinograph measurement result of the bread made with perilla seed powder showed that consistency, water absorption and tolerance index have increased as the perilla content increased. The amylograph measurement result of the bread made with perilla seed powder showed that T, P, H, F, P-H and F-H have decreased as the perilla content increased. Baking loss and specific loaf volume have decreased as the perilla content increased. The chromatic 'L' and 'b' values were reduced as more perilla was added to more pan bread, while the chromatic 'a' value increased. The texture measurement result showed that the hardness of bread have increased as the ingredient contents increased. Their cohesiveness, spinginess, and chewiness have decreased as the ingredient contents increased. Overall preference scores showed a high preference for the bread made with 15% perilla seed powder.

• Composites Research
• /
• v.21 no.2
• /
• pp.15-24
• /
• 2008

In this study, shear thickening fluid (STF) filled with rigid nano silica particles was impregnated in plain woven Kevlar fabrics to improve the impact resistance performance. The nano silica particles with an average diameter of 100nm, 300nm, and 500nm were used to make shear thickening fluid to estimate the effect of particle size on the impact behavior of STF impregnated Kevlar fabrics. The yam pull-out and frictional tests were conducted to estimate the effect of impregnated STF on the frictional characteristics. The test results showed that the friction forces were dramatically increased at the STF onset shear strain rates that were measured in preliminary rheology tests. The low speed impact tests were performed using the drop test machine. The results showed that the impregnated STF improved the impact resistance performance of the Kevlar fabrics in terms of the impact energy absorption and the deformation. It has been shown through tests that the impregnated STF affects the interfacial friction which contributes to improve the energy absorption in the Kevlar fabrics. Especially, the impregnation of the STF with the smaller particle size into the Kevlar fabrics showed the better performance in impact energy absorption.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.143-152
• /
• 1999

Using a Rheometrics Fluids Spectrometer(RFS II), the steady shear flow and the small-amplitude dynamic viscoelastic properties of three kinds of semi-solid food materials(mayonnaise, tomato ketchup, and wasabi) have been measured over a wide range of shear rates and angular frequencies. The shear rate dependence of steady flow behavior and the angular frequency dependence of dynamic viscoelastic behavior were reported from the experimentally measured data. In addition, some viscoplastic flow models with a yield stress term were employed to make a quantitative evaluation of the steady flow behavior, and the applicability of these models was also examined in detail. Furthermore, the correlations between steady shear flow(nonlinear behavior) and dynamic viscoelastic(linear behavior)properties were discussed using the modified power-law flow equations. Main results obtained from this study can be summarized as follows : (1) Semi-solid food materials are regarded as viscoplastic fluids having a finite magnitude of yield stress, and their flow behavior shows shear-thinning characteristics, exhibiting a decrease in steady flow viscosity with increasing shear rate. (2) The Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable to describe the steady flow behavior of semi-solid food materials. Among these models, the Heinz-Casson model has the best validity. (3) Semi-solid food materials show a stronger shear-thinning behavior at shear rate region higher than a critical shear rate where a more progressive structure breakdown takes place. (4) Both the storage and loss moduli are increased with increasing angular frequency, but they have a slight dependence on angular frequency. The elastic behavior is dominant to the viscous behavior over a wide range of angular frequencies. (5) All of the steady flow, dynamic, and complex viscosities are well satisfied with the power-law model behavior. The relationships between steady shear flow and dynamic viscoelastic properties can well be described by the modified forms of the power-law flow equations.