• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.57-61
• /
• 1991

Rheological properties of Tongjinbyeo(Japonica) and Samgangbyeo($J{\times}Indica$) rice starches gelatinized with thermal or alkali solutions were investigated with rotational viscometer(Brabender Viscotron). The two starches showed Bingham pseudoplastics behavior in $4{\sim}8%$ thermal or alkali gelatinized starch solutions. Rheological properties of thermal gelatinized starch solutions were similar between the two varieties. However, alkali gelatinized Samgangbyeo starch solutions showed higher values of yield stress and consistency index than that of Tongjinbyeo starch. The values of pseudoplasticity, yield stress and consistency index were higher in the thermal gelatinized samples than those of in the alkali gelatinized ones.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1714-1723
• /
• 2020

This study aims at characterizing the rheological properties of uranium oxide powders for nuclear fuel pellets manufacturing. The flowability of these powders must be compatible with a reproducible filling of press molds. The particle size distribution is known to have an impact on the rheological properties and fine particles (<100 ㎛) are suspected to have a detrimental effect. In this study, the impact of the particle size distribution on the rheological properties of UO₂ powders was quantified, focusing on the influence of fine particles. Two complementary approaches were used. The first approach involved characterizing the powder in a static state: density, compressibility and shear test measurements were used to understand the behavior of the powder when it is transitioned from a static to a dynamic state (i.e., incipient flow conditions). The second approach involved characterizing the behavior of the powder in a dynamic state. Two zones, corresponding to two characteristic behaviors, were demonstrated for both types of measurements. The obtained results showed the amount of fines should be kept below 10 % wt to ensure a robust mold filling operation (i.e., constant mass and production rate).

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.740-745
• /
• 2002

The current study was conducted to identify the differences in the rheological properties of Chlorella sp. powder cultured in a fermentor and in a pond-like environment. Cells. cultured in the same media were harvested and spray dried. The biomass yield from the fermentor culture was 4.7% (dry basis), while that from the pond was 4.3% (dry basis). Measurements of the loose bulk density, tapping test, Hausner's ratio, and compressibility test all revealed differences between the rheological properties of the Chlorella sp. from the two cultivation systems. Although both the fermentor and pond cultured Chlorella sp. showed the same angle of repose, the mean size of the cells was 2.26 $\mu\textrm{m}$ and 2.89 $\mu\textrm{m}$, respectively. The weight of the Chlorella sp. tablets cultured in the fermentor and pond was 0.663 g/tablet and 0.593 g/tablet, respectively, while the friability of the tablets was 21% and 41%, respectively. Observation by Transmission Electron Microscope (TEM) showed that the cell wall of the Chlorella sp. cultured in the fermentor was thinner and more spherical than that cultured in the pond, thereby providing the main characteristic rheological properties of the powder.

• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.737-742
• /
• 2005

Rheological properties of ordinary portland cement (OPC) containing metakaoline (MK), granulated blast furnace slag (GBS) and polycarboxylate type superplasticizer (PCA) were investigated using a mini-slump test, sedimentation test and viscometer. Fluidity of cement pastes containing MK (OPC-MK, OPC-MK-GBS systems) with PCA were higher than those of the cement pastes without MK(OPC, OPC-GBS systems). Colloid suspensions with $0.1\%$ PCA were changed from stable sedimentation behaviors to flocculation behaviors in the OPC-MK, OPC-GBS and OPC-MK-GBS systems. The colloid suspensions showed stable sedimentation behaviors with PCA greater than $0.2\%$. The OPC system showed shear thinning behavior. However, the other systems showed weak shear thinning behaviors with PCA. Rheological properties of cement pastes were improved when MK and GBS were contained together. The rheological properties of OPC-MK, OPC-GBS and OPC-MK-GBS systems were improved by PCA added greater than $0.2\%$.

• Advances in concrete construction
• /
• v.13 no.5
• /
• pp.395-410
• /
• 2022

This study collected the results of material tests and full-scale pumping tests using 127 types of concrete mixtures with compressive strength ranging from 24 to 200 MPa. The results of 242 material tests showed high correlations between the viscosity of the lubricating layer and concrete, between the slump and the yield stress of concrete, between the water-binder ratio and the viscosity of lubricating layer, and between the time required to reach 500 mm of slump flow and concrete viscosity. Based on these correlations, pumpability was predicted using 101 pumping test conditions, and their accuracy was compared to the actual test results. When the rheological properties of concrete and the lubricating layer were directly measured, the prediction result showed the highest accuracy. A high accuracy can be achieved when the measured viscosity of the lubricating layer, a key determinant of concrete pumpability, is reflected in the prediction of pumpability. When measuring rheological properties is difficult, the slump test can be used to quantitatively predict the pumpability despite the lower accuracy than those of other prediction methods.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.447-453
• /
• 2006

of synthetic conditions and water content on rheological properties of polyacrylamide hydrogels were studied. The non-Newtonian flow curves of polyacrylamide hydrogels were obtained by using a cone-plate rheometer. The rheological parameters were obtained by applying non-Newtonian equation to the flow curves for polyacrylamide hydrogels. The polyacrylamide hydrogels are shear thinning under increasing shear rate modes which result in thixotropic behavior. These flow properties are controlled by the characteristics of flow units and the interaction among the flow segments.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.139-147
• /
• 2003

Coater runnability of the paper coating and final product properties can be affected by the immobilization of coating color and the dewatering into the base paper. During the dewatering, the rheological properties and solids content of a coating are dramatically changed. For the purpose of obtaining better coater runnability and high quality of coater paper many papermakers are trying to improve the water retention of paper coatings by using some additives such as thickener and co-binder. In this study, we tried to investigate the rheological properties and the immobilization point of coatings with immobilization cell during the dewatering of coatings.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.1
• /
• pp.180-184
• /
• 2013

Recently, silk sericin has attracted the attention of researchers owing to its useful properties as a biomaterial including 1) good wound healing and cell activities, 2) fast gelation character, and 3) high water retention property. In the present study, silk sericin was prepared using different extraction times in hot water and the effect of extraction time on the rheological properties of sericin solutions and gels was examined. It was found that the production yield of sericin increased with extraction time. The shear viscosity of sericin solutions and gels decreased with increasing extraction time due to a decrease in sericin molecular weight. When the sericin solution transformed to a gel, the viscosity increased and the shear thinning behavior was more evident. In addition, the shear stress measurements indicated that the slip between the sericin samples and the measuring plate of the rheometer was increased by the gelation of sericin. The compression strength of sericin gel could be increased remarkably (by more than 100 fold) by preparation using the freezing and thawing method.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.1-12
• /
• 2004

In lithography based on repulsion of ink and water emulsification is inevitably generated. Thus it is necessary to analyze relationship between printability and physical and chemical properties of emulsified ink. Transfer rate of ink is one of the important factor deciding print quality. And it is closely concerned with rheological properties of emulsified ink. Rheological properties such as flow, yield, plastic viscosity, creep, oscillation and tack tests were measured. In order to examine printability of emulsified ink, ink transfer equations, density, ink film thickness and gloss were measured.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.425-433
• /
• 2014

In this study, microstructure and gel content (C-C) of polybutadiene rubber (PBR) were investigated using various techniques including ASTM D 3616, attenuated total reflectance Fourier transform infrared spectrometry (ATR FTIR), differential scanning calorimetry (DSC) and nuclear magnetic resonance spectroscopy (NMR). The ATR FTIR spectra of the samples were investigated to determine the cis, trans, 1, 2-vinyl and the C-C gel content in PBR. The absorbance ratios of specific peaks in different grades of PBR were correlated with the C-C gel content measured by the ATR FTIR techniques. Physico-mechanical and rheological properties of rubber compounds based on BR with various amounts of gel were determined. The results showed that there is an acceptable correlation between these properties and the C-C gel content of PBR.