• Journal of Preventive Medicine and Public Health
• /
• 제52권6호
• /
• pp.377-383
• /
• 2019

Objectives: Self-reported disease history is often used in epidemiological studies. In this study, we acquired the hospital records of subjects who self-reported stroke or myocardial infarction (MI) and evaluated the validity of the participants' self-reported disease history. We also determined the level of agreement between specialists and non-specialists. Methods: Among the participants in the Health Examinees study, 1488 subjects self-reported stroke or MI during 2012-2017, and medical records were acquired for the 429 subjects (28.8%) who agreed to share their medical information. Each record was independently assigned to 2 medical doctors for review. The records were classified as 'definite,' 'possible,' or 'not' stroke or MI. If the doctors did not agree, a third doctor made the final decision. The positive predictive value (PPV) of self-reporting was calculated with the doctors' review as the gold standard. Kappa statistics were used to compare the results between general doctors and neurologists or cardiologists. Results: Medical records from 208 patients with self-reported stroke and 221 patients with self-reported MI were reviewed. The PPV of self-reported disease history was 51.4% for stroke and 32.6% for MI. If cases classified as 'possible' were counted as positive diagnoses, the PPV was 59.1% for stroke and 33.5% for MI. Kappa statistics showed moderate levels of agreement between specialists and nonspecialists for both stroke and MI. Conclusions: The validity of self-reported disease was lower than expected, especially in those who reported having been diagnosed with MI. Proper consideration is needed when using these self-reported data in further studies.

• Korean Journal of Agricultural Science
• /
• 제46권2호
• /
• pp.239-256
• /
• 2019

The quality of tomatoes drastically changes according to storage conditions, such as temperature, humidity, and air composition. High storage temperatures result in the degradation of the firmness and color of tomatoes and in decay by bacteria, whereas chilling injury and softening can be caused by storage at low temperatures. The gas composition in the storage and packaging are other parameters that influence the quality and shelf life of tomatoes by preventing excessive transpiration and respiration. In addition, tomato quality is dependent on the degree of maturity and harvest season. Because there are many quality parameters, it is necessary to systemically establish an optimal standard, and this approach requires collecting and reviewing various data on storage conditions. The aim of this review was to provide basic information by comparing and analyzing studies on the changes in tomato quality (firmness, color, lycopene content, and acidity of tomatoes) during storage and to describe a few models that can assess the quality parameters. Many studies have provided results from experiments on the effects of postharvest control (e.g., storage temperature, packaging film, and gas treatment, as reviewed above) on tomato quality including firmness, soluble solids content, and lycopene content. However, it is still necessary to conduct an overall analysis of the published conditions and to determine the best method for preserving the quality of tomatoes as well as other fruits.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• 제34권2호
• /
• pp.21-37
• /
• 2021

Objectives : Allergic rhinitis(AR) is a common chronic disease that accounts for 10-40% of the world's population. This study aims to analyze the status of claims, prevalence, and medical utilization of allergic rhinitis patients using representative patients sample data. Methods : This study used the National Patients Sample(HIRA-NPS) of the Health Insurance Review and Assessment Service for 7 years(2010-2016). And we defined AR patients as all statements including J30 or a subcategory of J30 as the main disease, using the Korean Standard Classification of Diseases(KCD-7). The trend of AR patients by year was divided into Western medicine(WM) and Korean medicine(KM), and analyzed by subgroup analysis such as inpatient/outpatient, gender, age, insurance type, and care institution. Results : Patients with AR were mainly claimed for first sub diagnosis in WM and major diagnosis in KM, and the number of claims increased about 1.3 times and 1.4 times compared to 2010 in WM and KM, respectively. In addition, the total annual medical expenses in 2016 increased 1.3 times and 1.7 times compared to 2010, respectively. Conclusions : Both WM and KM are showing a steadily increasing trend in medical use due to allergic rhinitis. Further research is needed by considering genetic and environmental factors and individual characteristics, and linking with additional data.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• 제34권11호
• /
• pp.13-22
• /
• 2018

At the time when zero energy building is expected to be generalized, this study examines whether the investment in the passive element or the active element is more effective in terms of energy in the construction process of zero energy building. In other words, the effect of energy demand by passive element and the change of energy generation by active element are examined in terms of the same investment cost. The purpose of this study is to examine the change of energy demand by passive element and the change of energy generation by active element in zero energy building and to make reasonable investment decision by comparing energy with cost aspect. For this purpose, we selected the buildings to be subjected to energy simulation and derive the required energy amount and energy generation amount by using meteorological data of four regions in Korea. The change of energy demand and energy generation according to the change of application condition was derived. In order to compare and analyze the changes in energy demand and generation at the same cost standard through price survey and quotation of window and photovoltaic power generation equipment.

• Korean Journal of Acupuncture
• /
• 제37권4호
• /
• pp.271-275
• /
• 2020

Objectives : The acupoint TE11 (cheongnaengyeon; CNY) firstly appeared in the ≪A-B Classic of Acupuncture and Moxibustion (AB Classic)≫. The name CNY is known to be originated from an ancient deep pool described in the book of ≪Chuangtzu (Jangja in Korean)≫. Description of the name, however, was not found in a single form in the book of ≪Chuangtzu≫ and its annotated books which made a confusion. The aim of the present study is to review the name of TE11 in terms of its origin. Methods : We have compared printed editions of ≪Chuangtzu≫ and its annotated books and various acupuncture classics including ≪AB Classic≫, ≪Essential Prescriptions Worth a Thousand Gold for Emergencies (Essential Prescriptions)≫, ≪Illustrated Manual of Acupuncture Points of the Bronze Figure (Illustrated Manual)≫, ≪Collection of Gems of Acupuncture and Moxibustion (Collections of Gems)≫, and ≪Complete Compendium of Acupuncture and Moxibustion (Complete Compendium)≫. Results : The name of ancient deep pool was found in two different forms in the book of ≪Chuangtzu≫ and its annotated books. One was CNY, the other was Cheong Ryeong Yeon (CRY). The description in the ≪Chuangtzu≫, the source book, was CRY. In addition, the acupoint TE11 was described as CRY in the ≪AB Classic≫, Cheong Ryeong Cheon in the ≪Essential Prescriptions≫. Meanwhile, the point was described as CNY in the ≪Illustrated Manual≫, the ≪Collections of Gems≫ and the ≪Complete Compendium≫. Conclusions : Data suggest that the original description was CRY and a mix of CNY and CRY as a name of TE11 was used. The Korean standard name of TE11 should be changed as CRY.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.341-350
• /
• 2021

Purpose: The use of micro-computed tomography (micro-CT) scans in biomedical and dental research is growing rapidly. This study aimed to explore the scientific literature on approaches and applications of micro-CT in restorative dentistry. Materials and Methods: An electronic search of publications from January 2009 to March 2021 was conducted using ScienceDirect, PubMed, and Google Scholar. The search included only English-language articles. Therefore, only studies that addressed recent advances and the potential uses of micro-CT in restorative and preventive dentistry were selected. Results: Micro-CT is a tool that enables 3-dimensional imaging on a small scale with very high resolution. In this method, there is no need for sample preparation or slicing. Therefore, it is possible to examine the internal structure of tissue and the internal adaptation of materials to surfaces without destroying them. Due to these advantages, micro-CT has been recommended as a standard imaging tool in dental research for many applications such as tissue engineering, endodontics, restorative dentistry, and research on the mineral density of hard tissues and bone growth. However, the high costs of micro-CT, the time necessary for scanning and reconstruction, computer expertise requirements, and the enormous volume of information are drawbacks. Conclusion: The potential of micro-CT as an emerging, accurate, non-destructive approach is clear, and the valuable research findings reported in the literature provide an impetus for researchers to perform future studies focusing on employing this method in dental research.

• Journal of Sensor Science and Technology
• /
• 제30권6호
• /
• pp.388-394
• /
• 2021

The conventional microelectromechanical system (MEMS) process has been used to fabricate sensors with high costs and high-volume productions. Emerging 3D printing can utilize various materials and quickly fabricate a product using low-cost equipment rather than traditional manufacturing processes. 3D printing also can produce the sensor using various materials and design its sensing structure with freely optimized shapes. Hence, 3D printing is expected to be a new technology that can produce sensors on-site and respond to on-demand demand by combining it with open platform technology. Therefore, this paper reviews three standard 3D printing technologies, such as Fused Deposition Modeling (FDM), Direct Ink Writing (DIW), and Digital Light Processing (DLP), which can apply to the sensor fabrication process. The review focuses on strain/load sensors having both sensing material features and structural features as well. NCPC (Nano Carbon Piezoresistive Composite) is also introduced as a promising 3D material due to its favorable sensing characteristics.

• The Journal of Korean Obstetrics and Gynecology
• /
• 제35권3호
• /
• pp.122-136
• /
• 2022

Objectives: The aim of this study is to investigate Heart Rate Variability (HRV) characteristics of patients with primary dysmenorrhea at the menstrual phase. Methods: 7 databases (Pubmed, Cochrane library, CNKI, RISS, KISS, OASIS, ScienceON) were searched for eligible studies published before 2021 December. The studies comparing HRV between patients with primary dysmenorrhea and controls were included. A random-effects model was used to evaluate differences of HRV parameters between patients with primary dysmenorrhea and controls. Results: 4 articles were included in this review based on inclusion and exclusion criteria. SDNN (Standard deviation of NN intervals), RMSSD (Square root of the mean squared difference of successive NN intervals), mean PR (Mean of pulse rate), LF (Low frequency), HF (High frequency), was the most frequently used as HRV parameters. RMSSD was significantly lower in patients with primary dysmenorrhea than controls. There was no statistically significant difference of other HRV parameters between patients with primary dysmenorrhea and controls. Conclusions: This study suggests that parasympathetic activity and overall functions of autonomic nervous system might be decreased in patients with primary dysmenorrhea at the menstrual phase. In the future, well-designed clinical studies using HRV and additional meta-analysis should be conducted to obtain a wealth of information about HRV characteristics of patients with primary dysmenorrhea.

• Journal of KIBIM
• /
• 제12권4호
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• Journal of Animal Science and Technology
• /
• 제64권3호
• /
• pp.397-408
• /
• 2022

Rinse & Chill^® technology (RCT) entails rinsing the vasculature using a chilled isotonic solution (3℃; 98.5% water and a blend of dextrose, maltose, and sodium phosphates) to rinse out the residual blood from the carcass. Infusion of pre-chilled solutions into intact animal carcasses immediately upon exsanguination is advantageous in terms of lowering the internal muscle temperature and accelerating chilling. This technology is primarily used for purposes of effective blood removal, favorable pH decline, and efficient carcass chilling, all of which improve meat quality and safety. Although RCT solution contains some substrates, the pre-rigor muscle is still physiologically active at the time of early postmortem and vascular rinsing. Consequently, these substrates are fully metabolized by the muscle, leaving no detectable residues in meat. The technology has been commercially approved and in continuous use since 2000 in the United States and since 1997 in Australia. As of January 2022, 23 plants have implemented RCT among the 5 countries (Australia, US, Canada, New Zealand, and Japan) that have evaluated and approved RCT. All plants are operating under sound Sanitation Standard Operation Procedures (SSOP) and a sound Hazard Analysis Critical Control Point (HACCP) program. No food safety issues have been reported associated with the use of this technology. RCT has been adapted by the meat industry to improve product safety and meat quality while improving economic performance. Therefore, this review summarizes highlights of how RCT technically works on a variety of animal types (beef, bison, pork, and lamb).