• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.447-451
• /
• 2004

Generally, Fixed Quantity ordering system (Q-system) uses linear model in inventory decrease. This paper focuses on that Fixed Quantity ordering system (Q-system) is based on a continuous review system. To use a continuous review system is because of an inventory decrease ration is not constant. Therefore, this paper introduces a method to select a model which is proper to virtual data under conditions which are inconstant.

• 대한기관윤리심의기구협의회지
• /
• 제2권1호
• /
• pp.6-22
• /
• 2020

Purpose: Clinical studies require institutional review board (IRB) approval based on the ethical principle and regulations. While the number of clinical studies has been increased and diversified, duplicated IRB review for multi-center studies has become a major issue. Therefore, single IRB system has been suggested in revised Common Rule. This study aimed to identify and assess the current status of single IRB in Korea and the anticipated needs of single IRB from researchers and IRB member or administrators. Methods: We developed 14 questions including perceived advantages and disadvantages of single IRB, and anticipated problems. The online survey collected opinions on single IRB from researchers, IRB members and IRB administrators. We also interviewed five IRB administrators who have an experience of single IRB. Results: A total of 80 responses were analyzed in this study. Although efficiencies were suggested for the advantages of single IRB in terms of reducing burden of duplicated review, respondents also perceived that the different review criteria between single IRB and each IRB would be a major hurdle for adopting single IRB system. Therefore, the standardization of standard of procedures (SOP) and the standardization of IRB submission materials should be preceded. According to the small group experiences of single IRB in Korea, we also observed the similar anticipated problems of single IRB. Conclusion: Single IRB system has many advantages for conducting multi-center trial. However, many specialists still have a lot of concerns about introducing a single IRB system in Korea. Therefore, a gradual, step-by-step process for conducting a single IRB system in Korea will be needed. Many studies for improving currently suggested single IRB system and the improvement of awareness about the essential of single IRB system would be needed.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• 보건행정학회지
• /
• 제31권4호
• /
• pp.399-408
• /
• 2021

The emergency medical service system in Korea was built upon the Emergency Medical Service Act, 1995 to respond adequately to be much in demand for emergency medical services. In addition, the government recognized the importance of the trauma care system and set out to plan for the designation and establishment of the regional trauma center by 2012. This study aimed to investigate features of quality management and trauma fee schedule on better understanding of trauma care system. First, quality management of the regional trauma center has been implemented by several quality programs involved in quality assessment, committee on trauma quality management, and mortality and morbidity conference. Second, the trauma fee schedule has reflected a specific quality of severe traumatic conditions and added the result to it, which are graded A, B, and C according to quality assessment. Although the government has contributed to instituting a trauma quality assessment program and trauma fee schedule for the regional trauma center, it could not lead to such a fixed standard for quality management of them. Therefore, it will promote discussion on the sustainability of the regional trauma center that requires reducing preventable trauma death rate and the way to apply comprehensive quality management.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권4호
• /
• pp.131-137
• /
• 2006

The absorber in which heat and mass transfer phenomena occur simultaneously is one of the most critical components in the absorption system. It has the most significant influence on the performance and the size of the absorption system. During the absorption process, heat and mass transfer resistances exist in both liquid and vapor regions, so that the heat transfer mode should be carefully selected to reduce them. The objective of this paper is to review the previous papers analysing mathematical models of simultaneous heat and mass transfer phenomena during the absorption process. The most conventional working fluids ($H_2O$LiBr and $NH_3/H_2O$) are considered and the most common absorption modes (falling film and bubble mode) are dealt with in this review.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.57-66
• /
• 2011

A Photovoltaic/Thermal(PVT) solar system consists of PV module and thermal absorber plate which convert the absorbed solar radiation into electricity and heat. Meaningful researches and development (R&D) on the PVT technologies have been performed since the 1970s. This paper presents a review of the previous works covering the various types of PVT and their performance analysis in terms of electrical and thermal efficiency. This review compares electrical and thermal efficiency of the different types of PVT collectors and analyzes the parameters affecting PVT performance. Based on the literature review, box channel type PVT with unglazed, or flat plate PVT with glazed have the highest efficiency among them. From the literature review, R&D should be carried out aiming at improving their overall electrical and thermal efficiency, cutting down the cost, and making them more competitive in the energy consumption market.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.273-280
• /
• 2001

In this study, a comparison between the structural design criteria for a catenary system with the maximum design speed of 100km/h and that of 300km/h was performed in order to establish that of 200km/h. According to the result, catenary design criteria for 300km/h operation is more conservative than that for 100km/h operation. This result shows that higher wind pressure and safety factor are adopted to catenary design for 300km/h operation. So, for the purpose of the economic structural design for catenary system, it is necessary to review the adoption possibility of catenary system for 100km/h operation first. In order to review the adoption possibility for catenary system for 100km/h operation, design criteria for 300km/h operation should be chosen for safer catenary structure.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.250-255
• /
• 2011

A Photovoltaic/Thermal(PVT) solar system consists of PV module and thermal absorber plate which convert the absorbed solar radiation into electricity and heat. Meaningful researches and development (R&D) on the PVT technologies have been performed since the 1970s. This paper presents a review of the previous works covering the various types of PVT and their performance analysis in terms of electrical and thermal efficiency. This review compares electrical and thermal efficiency of the different types of PVT collectors and analyzes the parameters affecting PVT performance. Based on the literature review, box charmel type PVT with unglazed, or flat plate PVT with glazed have the highest efficiency among them. From the literature review, R&D should be carried out aiming at improving their overall electrical and thermal efficiency and cutting down the cost, making them more competitive in the energy consumption market.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.201-208
• /
• 1997

In order to improve the safety of nuclear power plant, we performed a human factors review for the CFMS(Critical Function Monitoring system) design of nuclear power plant. Three works were performed in this study. In first work, we developed human factors engineering program plan(HFEPP) and human factors engineering verification and validation plan (HFE-V & V plan) to effectively perform CFMS design and review. In second work, we identified human engineering discrepancies(HEDs) for CFMS design through human factors design review and proposed those resolutions. In the third work, we developed the evaluation and management methodology for identified KEDs. Methodology developed in this study can be used in other complex system as well as in CFMS design review.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.2040-2044
• /
• 2008

Recently, many safety measures are developing for the prevention of human error, which is main factors of railway accident. For the efficient management of human factors, many expertise on design, conditions, safety culture and staffing are required. But current safety management activities on safety critical works are focused on training, due to the limited resource and information. In order to establish railway human factors management, a systematic review model is required. Based on system engineering and nuclear industry model, a program review model is proposed in this study. The model includes operating experience review, task analysis, staffing and qualification, human reliability analysis, huma-system interface design, procedure development, training program, verification and validation, implementation and monitoring. Results can be applied for the review of safety measures relating to human factors.