• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.3
• /
• pp.294-301
• /
• 1988

A study on the lattice damages and impurity depth profiles have been performed with BF2 ion implanted silicon materials. Electrical measurement, SIMS and TEM analysis techniques were used in order to identify the reverse annealing phenomena, impurity depth profiles and lattice damages. A typical reverse annealing phenomena were shown at the dose of 1x10**15/cm\ulcorner and non-reverse annealing at the dose of 5x10**15/cm\ulcorner This was explained with the formation of the amorphous region at BF2+ ion implantation with high dose. That is, the amorphous reigons were recrystallized centrated at certain regions were measured by SIMS technique. The dislocation loops-like crystalline defects were observed with TEM cross sections, which were formed at the lattice damaged region during annealing process.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1104-1113
• /
• 2000

This paper proposes an efficient reverse engineering technique for compound surfaces using a boundary detection method. This approach consists in extracting geometric edge information using a vision system, which can be used in order to drastically reduce geometric errors in the vicinity of compound surface boundaries. Through the image-processing technique and the interpolation process, boundaries are reconstructed by either analytic curves (e. g. circle, ellipse, line) or parametric curves (B-spline curve). In other regions, except boundaries, geometric data are acquired on CMM as points inspected using a touch type probe, and then they are interpolated on several surfaces using a B-spline skinning method. Finally, the boundary edge and the skinned surfaces are combined to reconstruct the final compound surface. Through simulations and experimental works, the effectiveness of the proposed method is confirmed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.160-168
• /
• 1999

This paper describes one method of reverse engineering that machines a free form shape without descriptive model. A portable five-axes 3D CMM was used to digitize point data from physical model. After approximation by rational B-spline curve from digitized point data of a geometric shape, a surface was constructed by the skinning method of the cross-sectional design technique. Since a surface patch was segmented by fifteen part, surface merging was also implemented to assure the surface boundary continuity. Finally, composite surface was transferred to commercial CAD/CAM system through IFES translation in order to machine the modeled geometric shape.

• Journal of Ginseng Research
• /
• v.41 no.4
• /
• pp.534-539
• /
• 2017

Background: Ginsenosides are the main ingredients of ginseng, which, in traditional Eastern medicine, has been claimed to have therapeutic values for many diseases. In order to verify the effects of ginseng that have been empirically observed, we utilized the reverse docking method to screen for target proteins that are linked to specific diseases. Methods: We constructed a target protein database including 1,078 proteins associated with various kinds of diseases, based on the Potential Drug Target Database, with an added list of kinase proteins. We screened 26 kinds of ginsenosides of this target protein database using docking. Results: We found four potential target proteins for ginsenosides, based on docking scores. Implications of these "hit" targets are discussed. From this screening, we also found four targets linked to possible side effects and toxicities, based on docking scores. Conclusion: Our method and results can be helpful for finding new targets and developing new drugs from natural products.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.877-880
• /
• 2000

In this paper, we develop an algorithm of soccer image sequences mosaicing using reverse affine transform. The continuous mosaic images of soccer ground field allows the user/viewer to view a “wide picture” of the player’s actions The first step of our algorithm is to automatic detection and tracking player, ball and some lines such as center circle, sideline, penalty line and so on. For this purpose, we use the ground field extraction algorithm using color information and player and line detection algorithm using four P-rules and two L-rules. The second step is Affine transform to map the points from image to model coordinate using predefined and pre-detected four points. General Affine transformation has many holes in target image. In order to delete these holes, we use reverse Affine transform. We tested our method in real image sequence and the experimental results are given.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.149-152
• /
• 2006

This paper describes the flow visualization around the model of a commercial passenger airplane, Boeing 747-400, which cruises in the transonic speed. The geometry was realized through the reverse engineering based on the photogrammetry. The three-dimensional inviscid steady compressible governing equations are solved in the unstructured grid system under the cruise condition and in a finite volume method. The convective term is processed by the Crank-Nicholson scheme and first order upwind scheme is applied. The lift and drag forces in the wing with engines increase by 1.49% End 3.9%, respectively compared with the wing without engines.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.4
• /
• pp.175-181
• /
• 2007

A computer model of a high efficiency refrigeration system equipped with heat storage for reverse cycle-hot gas defrost (the stored heat is used during defrost cycle of the system) is presented. The model was developed based on both theoretical and empirical equations for the compressor, evaporator, condenser and the heat storage equipment. Simulations of the prototype system were carried out to investigate refrigeration system performance under various operating conditions during refrigeration cycles. The simulations of the evaporator during defrost cycles at 30 and $40^{\circ}C$ hot gas refrigerant temperature were also performed which resulted on shorter defrost time but only slight increase in defrost efficiency. These information on energy efficiency and the defrost time required are important in order to avoid excessive parasitic load and temperature rise of the refrigerated room.

• Journal of the Korean Chemical Society
• /
• v.47 no.4
• /
• pp.309-314
• /
• 2003

In order to find out the microscopic environmental information on the nonionic reverse micelle of Triton X-100/n-hexanol/water in cyclohexane, an absorption and fluorescence spectroscopic study has been conducted using a methylene blue(MB). The information on the microscopic states of water in the polar core of the reverse micelle has been found by investigating complex formation and solvatochromic behavior between MB and Triton X-100. As a result, it was found that there exist three states in the polar core of the reverse micelle. The measured values of $W(=[H_2O]/[Surf])$ for the three states of water are 0.71, 4.98, and 7.26, and the corresponding lifetimes of MB are $15.45 ns{\pm}0.56$, $12.27 ns{\pm}0.79$, and $8.28 ns{\pm}0.82$, respectively.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.125-133
• /
• 2011

Purpose: The purpose of the present article is to help orthopedic surgeons better understand the function and performance of reverse total shoulder arthroplasty, and also to help them perform the most proper surgical technique for reconstruction. Materials and methods: In this article, the specific technical aspects and pitfalls of reverse total shoulder arthroplasty were reviewed in depth. Additionally, the current issues relevant to the reverse total shoulder arthroplasty such as scapular notching and restoration of active external rotation were discussed. Results and conclusion: An understanding of the biomechanics of reverse total shoulder arthroplasty and the technical details and pitfalls of its implantation are critical in order to provide the best functional outcome without increasing the risk of complications.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1100-1108
• /
• 2015

Classes.dex, which is the executable file for android operation system, has Java bite code format, so that anyone can analyze and modify its source codes by using reverse engineering. Due to this characteristic, many android applications using classes.dex as executable file have been illegally copied and distributed, causing damage to the developers and software industry. To tackle such ill-intended behavior, this paper proposes a technique to encrypt classes.dex file using an AES(Advanced Encryption Standard) encryption algorithm and decrypts the applications encrypted in such a manner in order to prevent reverse engineering of the applications. To reinforce the file against reverse engineering attack, hash values that are obtained from substituting a hash equation through the combination of salt values, are used for the keys for encrypting and decrypting classes.dex. The experiments demonstrated that the proposed technique is effective in preventing the illegal duplication of classes.dex-based android applications and reverse engineering attack. As a result, the proposed technique can protect the source of an application and also prevent the spreading of malicious codes due to repackaging attack.