• Archives of design research
• /
• v.21
• /
• pp.89-97
• /
• 1997

Product designers have both 2dimensional and 3 dimensional images in one mind. But the need of 3 dimensional form data is soaring these days. This study is about methods of effective product design form datamation using processing and reverse design tools regarding to 3 dimensional modeling data and hand made mock-up.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.399-404
• /
• 1994

The non-Newtonian viscosities (the specific or intrinsic viscosities) of poly(L-proline) (PLP, $M_v$=19,000 and 32,000) in various mixed-solvent systems like water-propanol and acetic acid-propanol of varying compositions were measured during the reverse mutarotation (Form II ${\rightarrow}$Form I) by the application of external pressure (up to 4.5 psi). The non-Newtonian viscosity effect was found to be larger in acetic acid-propanol system than in water-propanol system and to somewhat decrease during the reverse mutarotation at a given solvent system. The non-Newtonian viscosity behavior of PLP in aqueous salt ($CaCl_2$) solution was also studied, from which it was found that the degree of the non-Newtonian effect decreased with increasing salt concentration, and increased with increasing PLP molecular weight. These findings could be explained in terms of conformational changes of PLP in solution (like the helix-helix or helix-coil transition) involved.

• Journal of the Korean Society of Tobacco Science
• /
• v.1 no.2
• /
• pp.120-126
• /
• 1979

The nitrogen contents of some forms in Burley tobacco leaf cultivated in Yaesan, Mokpo and Namwon district were investigated. The rate of each form in total nitrogen contents were as follows ; Protein form nitrogen 30~33 % Nitrate form nitrogen 10~123% Alkaloid form nitrogen 8~16 % Ammonia form nitrogen 6~9% Amide form nitrogen 2~ 3% Other form nitrogen 26~44 % The order of nitrate form nitrogen content on the nitrogen of each tobacco cultivated in three area was Yaesan > Namwon > Mokpo, but that of alkaloid form nitrogen was reverse order of nitrate form nitrogen. As for Quality ( grade ), the orders of alkaloid and ammonia form nitrogen content on total nitrogen were H5> 3> 1> L 1> 3> 5, but that of nitrate form nitrogen was reversed.

• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.111-123
• /
• 2007

Unlike the conventional reverse time migration method which is implemented by simply extrapolating wavefield in reverse time, this paper presents a derivation of another reverse time migration operator as the exact adjoint of the presumed forward wavefield extrapolation operator. The adjoint operator is obtained by formulating the forward time extrapolation operator in an explicit matrix equation form and then taking the adjoint to this matrix equation followed by determining the corresponding operator. The reverse time migration operator as the exact adjoint to the implied forward operator can be used not only as a migration algorithm but also as an adjoint operator which is required in the imaging through an inversion such as least-squares migration.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2683-2688
• /
• 2012

The position of the thermodynamic equilibrium for reverse thermochromic spiropyran 6-carboxylates (SP-COOHs) was easily determined in aqueous binary mixtures, such as water-methanol, water-acetonitrile and water-dimethyl sulfoxide. The existence of more than one type of interconvertible species of the ring-opened form of SP-COOH in aqueous binary solvents enables us to evaluate the molar extinction coefficients of the ring-opened species of SP-COOH and to obtain the thermodynamic parameters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.533-539
• /
• 1997

Pressure ripple of hydraulic vane pump results form flow ripple due to pump geometry and reverse flow through the discharge port due to compressibility of fluid and result in vibration and noise of connected hydraulic elements. In a ba;anced type vane pump, cam ring curve is important factor to influence the flow ripple. Therefore, to reduce the now ripple, it has been required that optimal selection of seal region by proper design of cam ring and each port position, and notches for preventing the excessive reverse flow. This paper has been performed analytical study of compression characteristics with major design parameter in side plate and cam ring, and examined into the role of notch and radius reduction ratio.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.129-132
• /
• 1997

Laser scanning is widely used due to its fast measuring and high precision, and the segmentation of the scanned data is necessary for the fast and efficient surface modelling. But most segmentation techniques are based on the very regular data and the adaptation of previous techniques to the scanned data does not usually produce good result. A new approach to perform the segmentation on the scanned data is introduced to deal with problems during reverse engineering process. The approach is based on the triangulated data and its result is depending on the some user-defined criteria. The result is illustrated to demonstrate its adaptability to the measured data on free-form surface and the each result by different criteria is compared respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1409-1417
• /
• 2003

In the 21st century, the concept of remote design and manufacture is strongly required in manufacturing processes to reduce cost and time-to-market. The objective of this paper is the development of an internet-based dimensional verification system for reverse engineering. An inspection client can register measurement data at the developed web server. Collaborators related to the development of a new product can confirm geometrical form from measurement data, check dimensional information and mark up the important parts, as well as make a statement of their views through the Internet. The developed system is realized through the ActiveX-Server architecture. Functions of the dimensional verification module are constructed as ActiveX by using the visual C＋＋ and OpenGL. The usefulness of the developed system is confirmed through a case study.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.160-168
• /
• 1999

This paper describes one method of reverse engineering that machines a free form shape without descriptive model. A portable five-axes 3D CMM was used to digitize point data from physical model. After approximation by rational B-spline curve from digitized point data of a geometric shape, a surface was constructed by the skinning method of the cross-sectional design technique. Since a surface patch was segmented by fifteen part, surface merging was also implemented to assure the surface boundary continuity. Finally, composite surface was transferred to commercial CAD/CAM system through IFES translation in order to machine the modeled geometric shape.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.152-157
• /
• 2001

This paper is to model a 3D-shape product applying mathematically the data acquired from a 30 scanner and using an Automatic Design Program. The research studied in th reverse engineering up to now has been developed continuously and surprisingly. However, forming 3D-shape sol id models in CAE and CAM. based on the research, the study leaves much to be desired. Especially, analyses and studies reverse-designing automatically using measured data after manufacturing. Consequently, we are going to acquire geometric data using an 30 scanner in this study with which we will open a new field of reverse engineering by a program which can design a 3D-shape solid model in a CDA-based program automatically. Utilization of this program make it possible to minimize time in designing a product and establish a ADS(Automatic design system) program library to using all of the data from reverse engineering.