• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1613-1622
• /
• 2005

Broadcasting is fundamental and effective data dissemination mechanism for route discovery, address resolution, and many other network services in mobile ad hoc networks. Although many approaches for broadcasting have been proposed to minimize the number of retransmissions, none of them guarantee the best-suited bounds of retransmissions. Appropriate use of probabilistic method can lower the chance of contention and collision among neighboring nodes, so that it reduces the number of rebroadcasts. In this paper, we propose a probabilistic approach that dynamically adjusts the rebroadcasting probability according to the distance between the sender and the receiver. While the rebroadcast probabilities of a mobile node close to sender will be set lower, the rebroadcast probabilities of a mobile node far away from sender wi1l be set to higher, The rebroadcast probability of a node wi1l be set according to the distance from sender. We evaluate the performance of proposed approach by comparing it with flooding as well as a fixed probabilistic broadcast approach. Simulation results showed that the performance of proposed scheme outperforms by about $70\%$ than flooding scheme and outperforms by about $20\%$ than fixed probabilistic scheme.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2456-2467
• /
• 2018

Wireless multimedia sensor networks (WMSNs) require real-time quality-of-service (QoS) guarantees to be provided by the network. The end-to-end delay is very critical metric for QoS guarantees in WMSNs. In WMSNs, due to the transmission errors incurred over wireless channels, it is difficult to obtain reliable delivery of data in conjunction with low end-to-end delay. In order to improve the end-to-end delay performance, the system has to drop few packets during network congestion. In this article, our proposal is based on optimization of end-to end delay for WMSNs. We optimize end-to-end delay constraint by assuming that each packet is allowed fixed number of retransmissions. To optimize the end-to-end delay, first, we compute the performance measures of the system, such as end-to-end delay and reliability for different network topologies (e.g., linear topology, tree topology) and against different choices of system parameters (e.g., data rate, number of nodes, number of retransmissions). Second, we study the impact of the end-to-end delay and packet delivery ratio on indoor and outdoor environments in WMSNs. All scenarios are simulated with multiple run-times by using network simulator-2 (NS-2) and results are evaluated and discussed.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.230-233
• /
• 2003

In this paper, it is shown that, in DS/CDMA mobile systems, halving or doubling the spreading factor (HSF or DSE) when retransmission is requested possibly improves the throughput. Given transmit power, DSF essentially decreases probability of packet error (PPE) by increasing the signal energy per information bit. It, however, doubles the time duration needed for transmitting the original packet. On the other hand, HSF increases PPE. It, however halves the time duration required to carry the original packet. Thus, the efficiency of HSF or DSF as a retransmission strategy depends on the amount of increased or reduced PPE after HSF or DSF is selected. With achieving given residual error probability (REP) in CDMA systems, the effective throughput is evaluated in this paper to find conditions with which HSF or DSF achieves better performance than using the original one. Analytic results show that HSF or DSF performs better when relatively small or big changes in their PPE's are present, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.753-775
• /
• 2010

Greedy forwarding is a key mechanism of geographic routing using distance as a metric. As greedy forwarding only uses 1-hop neighbor node information, it minimizes routing overhead and is highly scalable. In existing greedy forwarding schemes, a node selects a next forwarding node based only on the distance. However, the signal strength in a realistic environment reduces exponentially depending on the distance, so that by considering only the distance, it may cause a large number of data packet retransmissions. To solve this problem, many greedy forwarding schemes have been proposed. However, they do not consider the unreliable and asymmetric characteristics of wireless links and thus cause the waste of limited battery resources due to the data packet retransmissions. In this paper, we propose a reliable and energy-efficient opportunistic greedy forwarding scheme for unreliable and asymmetric links (GF-UAL). In order to further improve the energy efficiency, GF-UAL opportunistically uses the path that is expected to have the minimum energy consumption among the 1-hop and 2-hop forwarding paths within the radio range. Comprehensive simulation results show that the packet delivery rate and energy efficiency increase up to about 17% and 18%, respectively, compared with the ones in PRR${\times}$Distance greedy forwarding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.265-275
• /
• 2011

In this paper, we propose a Multi-Strata Space Time Code(MSSTC) for MIMO retransmissions. Since MSSTC is constructed by superimposing two OSTBC matrices, there are no intra-stratum interferences, but there exist inter-strata interferences. In MIMO retransmission environment, the transmitter switches adaptively the phases of strata at each transmission by using 1-bit feedback sent from the receiver in order to reduce the inter-strata interferences efficiently. We also propose a power allocation scheme between strata to improve error performance. Simulation results show that the proposed scheme achieves better performance than other conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.694-702
• /
• 2009

Geographical routing protocol, where nodes only need local information exchange to make routing decisions, is a very efficient routing scheme for wireless sensor networks in scalability. However, pure geographical routing does not take account of wireless link condition. If wireless link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose geographical routing scheme considering wireless link condition, where reliable data transmission is made and the consumed energy is minimized.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12B
• /
• pp.1106-1114
• /
• 2003

Several analytic models describe transmission control protocol (TCP) performance such as steady-state throughput as an averaged ratio of number of transmissions to latency. For more detailed analysis of TCP latency, the latency during packet losses are recovered should be considered. In this paper, we derive the expected duration of loss recovery latency considering the number of packet losses recovered by retransmissions. Based on the numerical results verified by simulations, TCP using selective acknowledgement (SACK) option is more effective than TCP NewReno from the aspect of loss recovery latency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.9-12
• /
• 2007

In this paper, we propose and analyze a scheme for wireless channels, which is a combination of a type I hybrid-automatic repeat request (H-ARQ) scheme and a power ramping. The power ramping is considered for more reliable downlink data transmission, in which the transmission power is gradually changed from a small level to a large level when the number of retransmissions increases. The simulation results demonstrate that, when the power ramping step size is 0.5dB, the average throughput gain may be as high as 2% to 5% with properly selected parameters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.9-19
• /
• 2004

WLAN (Wireless Local Area Networks) needs error recovery and flow control schemes to support reliable multicast protocol. Limited wireless bandwidth, as well as queuing losses caused by the asymmetric wired/wireless interactions, demands more effective approaches for reducing packet losses. Moreover, since the wireless channel is a shared broadcast medium, if sender receives feedback information simultaneously from several receivers, the feedback delays data frame transmission of forward direction by introducing channel congestion and burden at the sender. Therefore, it is important to minimize the amount of feedback information from receivers. In this paper, we propose an ARS(Adaptive Redundancy Scheme) that combines FEC(Forward Error Correction) using channel state estimation and ARQ(Automatic Repeat Request) both to reduce the amount of feedback information and the number of retransmissions and to guarantee high data reliability in a WLAN multicast environment. Performance of the proposed scheme is evaluated by means of analysis and simulations in AWGN and Rayleigh fading channels. The results show that the proposed scheme reduces the amount of feedback information and the number of retransmissions and guarantees high data reliability, while keeping throughput efficiency similarly with the conventional FEC and ARQ scheme.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.