• 펄프종이기술
• /
• 제45권5호
• /
• pp.14-22
• /
• 2013

In this study, we investigated retention characteristics of nanocoated GCC that was positively modified by Layer-by-Layer (LbL) multilayering process. Three layers were formed onto GCC particles with poly-DADMAC/PSS/poly-DADMAC (PD3) and C-starch/A-PAM/C-starch (CS3) systems, respectively. Untreated GCC, PD3 GCC (strongly positive charge) and CS3 GCC (weekly positive charge) were retained on pulp fibers under single retention system or microparticle retention system conditions. In single retention system, PD3 particles were not affected by cationic retention aid due to their strong positive charge, whereas CS3 particles reacted with cationic retention aid due to anionic sites on the surface of the weekly positive particles. In a microparticle retention system, positively modified GCC (PD3 and CS3) showed higher retention level than untreated GCC at the same dosage of retention aid. The cationic surface of GCC particles were more reacted with bentonite so the deposition onto pulp fibers was improved. In addition, the retention level of nanocoated GCC was increased with maintaining good formation.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.191-195
• /
• 2006

Multivariate data analysis tools were used to improve the understanding of the wet end chemistry and white water system of the Papermill at NorskeCanada Crofton Division. Specifically, the analysis was aimed at identifying what variables were contributing to increased retention aid use and wet end instability. Several models were developed using data sets with up to 88 process variables and over 3000 observations. It was found that increased retention aid use was driven primarily by PCC and TMP usage as well as the addition of Alaskan White Spruce to the TMP furnish.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.63-69
• /
• 2005

This study was performed to introduce recently developed polyvinylamine as a wet-end process and paper strength improving aids. As a retention and drainage aids, high cationic charged polyvinylamine was more effective at the BCTMP and ONP stock condition than LBKP stock condition. As a dry tensile strength aid, dual system of polyvinylamine with anionic polyacrylamide was the best at the LBKP or ONP stock conditions. On the other hand, polyvinyl amine alone was better than dual system of polyvinylamine with anionic polyacrylamide at the BCTMP condition. As a wet tensile strength aid, polyvinylamine single system and dual system of polyvinylamine with anionic polyacrylamide were good at LBKP, BCTMP and ONP stock conditions. However, poly(aminoamide)-epichlorohydrin resin was good at LBKP and ONP stock conditions but efficiency of poly(aminoamide)-epichlorohydrin resin was remarkably decreased at BCTMP stock condition.

• 공업화학
• /
• 제7권2호
• /
• pp.315-320
• /
• 1996

본 실험에서는 보류향상제의 첨가량과 중질 탄산칼슘 첨가량에 따른 탄산칼슘 보류량(회분함량)을 조사하였으며, 동일 회분량에서 종이의 기계적 광학적 특성을 비교하였다. 각 보류시스템 모두 보류향상제 첨가량을 증가시키면 중질 탄산칼슘(입자평균직경 $3.2{\mu}m$) 보류, 즉 종이의 회분량은 증가한다. 이 경우 보류향상제와 중질 탄산칼슘 첨가량을 조절하여 이미 예정된 회분량이 함유된 종이를 초지할 수 있다. 종이의 인장지수, 파열지수, 인열지수 및 내부결합강도는 종이의 회분량이 증가됨에 따라 직선적으로 감소한다. 특히 동일 회분량에서 비교하면, 콤포질 시스템에 의한 종이에서 제반 강도가 높고, 듀알 폴리머 시스템에서는 강도가 낮다. 불투명도는 회분량 증가에 따라 함께 증가하며, 하이드로콜 시스템에서 가장 높고 역시 듀알 폴리머에서 가장 낮다. 동일 불투명도에서 종이의 강도는 콤포질, 하이드로콜, 듀알 폴리머 시스템 순으로 감소한다. 그러나 보류향상제의 우열을 판단하기 위해서는 충전제의 보류량과 종이의 강도 이외에도 적정 생산조건 및 적정 공정조건과 같은 여러 가지 다른 요인들도 고려되어야 한다.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.24-30
• /
• 2006

This study was performed to characterize inverse emulsion type cationic polyacrylamide (PAM) and to compare with powder and salt dispersion type PAMs as a retention and drainage aid. Salt dispersion type PAM has defects of high amount of salt which increases conductivity of white water, low active polymer contents and relatively worse retention and drainage properties than others because of its low molecular weight. Powder type PAM has benefit of high active polymer contents and good retention and drainage properties, but defects of low dissolution speed and insoluble particle generation were observed. However, inverse emulsion type showed the best retention and drainage aids among them by controlling molecular weight and morphology easily and it had relatively higher active polymer contents and better solubility.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 추계학술발표논문집
• /
• pp.57-70
• /
• 2006

Microparticle and micropolymer retention and drainage aid systems are powerful tools for paper and board making on a variety of machines. Drawbacks attributed to the current systems sometimes include; apparent high cost, production and quality problems and in some cases a negative effect on formation. The next generation multi-component organic/inorganic systems have demonstrated their ability to decouple the effects of retention and drainage and to improve the formation and print quality for the same retention and in some cases higher retention levels. It is now possible to optimize independently retention, drainage and formation effects with the same high return on investment of current microparticle systems.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.7-13
• /
• 2010

KOptimization and control of wet-end process provide a key solution to improve paper quality and production efficiency at the same time. Wet-end of paper machine is to determine three important influencing factors of papermaking i.e., retention, drainage and formation. Good formation of paper could be made at the cost of deteriorated retention or drainage. In the same manner increase of retention aid could cause the bad formation of paper. It is very important to find a proper retention chemical which may satisfy one of three factors without the sacrifice of other two. Laboratory scale analyzing or screening chemical additives of wet-end was reported in this study based on RDA sheet molding. Different from the conventional test method, simultaneous consideration of three important wet-end properties could be made by RDA and consequently more reliable prediction of actual paper machine wet-end could be expected.

• 한국물환경학회지
• /
• 제28권1호
• /
• pp.121-128
• /
• 2012

The purpose of this study is to solve the problem of nutrient removal due to rapid hydraulic retention time (HRT) variation in small size private sewage treatment facility and to have better effluent quality by using natural zeolite as a coagulant aid. The experiments were conducted by applying different conditions of HRT, coagulant, and zeolite dosages. As an experimental result, $TBOD_{5}$, TSS, and TP removal efficiencies were 64.9%, 94.5%, and 98.8% at co-injection with zeolite. Overall removal efficiencies of $TBOD_{5}$, TSS, and TP have improved 15.7, 28.7, 6.1%, respectively. This result shows that zeolite addition could improve flocculation, increase setting velocity, and thus have better treatment. Therefore the use of zeolite as a coagulant aid can be useful in small size private sewage treatment facility, where especially extra nutrient removal is required to meet the legal standard for discharge.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.9-17
• /
• 2001

The floc characteristics of base paper stock for coating by the retention aid system consisting of polyacrylamide (high molecular weight low charge density, HMLC) and PEI without and with anionic inorganic oxide (IO) were investigated under various shear conditions of MDDA (modified dynamic drainage analyzer). The floc size was increased with cationic electrolytes dosage whatever inorganic oxide is applied or not. The effect of inorganic oxide on the floc size showed the different result between PAM and PEI. The smaller floc was obtained by PAM without inorganic oxide, but larger floc was obtained by PAM with inorganic oxide. However, the effect of shear force was not observed. Floc formation index was decreased by the addition of cationic electrolytes with or without inorganic oxide. Floc formation index had better correlation format formation index than floc size. The relationships between wet web permeability and mat air permeability showed the significant linear correlation ($R^2$=0.97~0.98) for HML PAM and PEI. Floc formation index gave more useful information than the retention measurement when the performance of retention aids is evaluated at the laboratory before applying at the paper mill.

• Elastomers and Composites
• /
• 제39권3호
• /
• pp.209-216
• /
• 2004

Polyurethane prepolymer에 2-hydroxyethylmethacrylate(HEMA)와 acrylamide(AA)를 반응 시켜 두 가지 타입의 polyurethane-acrylate 중합체들을 합성하였다. 합성된 중합체들을 소량의 benzyl chloride와 증류수를 이용하여 수용성 중합체인 폴리우레탄-아크릴레이트계 양이온성 보류향상제를 제조하였다. 이렇게 두 가지 형태로 제조된 중합체에 대하여 보류향상제로서 중요한 특성인 보류, 탈수특성 및 비압축강도 등의 물성들을 다양한 방법으로 고찰하였다. 합성된 폴리우레탄-아크릴레이트계 양이온성 보류향상제는 rpm에 따라 큰 변화 없이 70% 내외의 보류도를 유지하였으며, 합성한 보류향상제의 첨가로 인한 화학적 산소 요구량(COD)의 경우는 미첨가시의 COD보다 상당히 낮은 값이 관찰되었다. 탈수량의 경우 무처리한 펄프보다 보류향상제의 처가 시에 탈수성이 향상되었으며, 보류향상제의 첨가 시 비압축강도가 소량 증가되었고, PU-HEMA가 PU-AA보다 우수한 강도를 나타내었다.