• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.638-646
• /
• 2015

To increase the utility of seeds in plant resources, seeds of 6 Aster species(A. incisus, A. hayatae, A. koraiensis, A. scaber, A. spathulifolius, and A. yomena) were subjected to experiments to develop adequate methods for sprout production. To study optimum germination conditions, germination rates of the seeds were analyzed at different temperature (15, 20, 25, and $30^{\circ}C$) and light conditions. A longitudinal growth experiment was performed in dark conditions for 10 days. Seedlings, with optimum germination rate and longitudinal growth, were placed in the light for 0-3 days to seek the adequate greening periods. Sprouts grown under optimum environmental conditions were placed in vessels with or without ventilation, and stored under $4^{\circ}C$ and $10^{\circ}C$ to examine storage environment and period. As a result of this analysis, seeds were selected that germinated over 50% within 12 days. Longitudinal growth was promoted at $20-25^{\circ}C$, and optimum growth was obtained with 7-9 days. As greening days increased longitudinal growth was retarded, but orbital growth of radicles and cotyledons was promoted. Considering all these factors, greening treatment of 2 days showed the best results. In a storage ability experiment, the best result was achieved by storage in vessels without ventilation under $4^{\circ}C$. Ventilation prevented rotting of sprouts, but reduced moisture contents of sprouts. Most sprouts were fresh at $4^{\circ}C$ for 3-6 days. In particular, sprouts of A. hayatae and A. yomena had high keeping quality, and remained fresh over 3 days even at $10^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.127-136
• /
• 1996

Mak-kimchi (shredded kimchi) which was prepared in a commercial factory was packed in bottle (200 g) under vacuum (560 mmHg) or atmosphere, and chemical characteristics and microbiological parameters were monitored during storage at 5, 15 and $25^{\circ}C$, respectively. Optimum ripening time of the kimchi at different temperature were 2 days at $25^{\circ}C$, 5 days at $15^{\circ}C$ and more than 60 days at $5^{\circ}C$. By vacuum treatment pH and acidity changes in kimchi were considerably retarded. The vacuum of each bottle released within 1 or 2 days at 25 or $15^{\circ}C$, respectively but the pack at $5^{\circ}C$ maintained more than 380 mmHg vacuum for 36 days and then the vacuum slowly released. The colour of kimchi (lightness, redness, yellowness) in bottle increased sharply at $25^{\circ}C$ and $15^{\circ}C$ but sustained a stable level with vacuum treatment at $5^{\circ}C$. The range of total viable count of kimchi in bottle was $10^7{\sim}10^{10}/ml$. The number decreased by storage temperature drop to $5^{\circ}C$ and even more vacuum treatment than atmosphere treatment at $5^{\circ}C$. Lactobacillus brevis, L. plantarum, L. acidophilus, Aerococcus viridans and Streptococcus faecium subsp. casseliflavus were identified in bottled kimchi and L. brevis and L. plantarum contributed to the main function during kimchi fermentation. Those main lactic acid bacteria decreased in numbers at $5^{\circ}C$ than 25 or $15^{\circ}C$ and even more declined in case of vacuum treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.228-234
• /
• 2016

The aim of this study was to develop pharmaceutical dosage forms with a bi-phasic drug using a double extrusion approach. Hot melt extrusion was performed using a co-rotating twin-screw extruder. The. 1st melt extrusion was performed using polymer with a relatively higher Tg, such as HPMC and the 2nd melt extrudate was obtained using the 1st extrudate and polymers with a lower Tg, such as HPMC-AS and PEO. In addition, the formulation with all the content in the same proportion as the double extudate was produced using single extrusion for comparison. Physical characterization was performed on the formulations employing differential scanning calorimetry (DSC). In vitro release tests were studied using a USP Type-I apparatus at $37{\pm}0.5^{\circ}C$ and 100 rpm. The similarity factor (f2) was also used to check the difference statistically. The DSC results indicated that the crystallinity of ibuprofen was changed to an amorphous state after extrusion in both double and single melt extrusion. Double melt extrudate with ibuprofen showed the desired release in acidic media (pH 1.2) in the first two hours and basic (pH 6.8) during six hours. Double melt extrudate with glimepiride showed faster release in 60 min of over 80%, whereas the single extrudate with glimepiride showed retarded release due to the interaction with HPMC. The similarity factor(f2) value was 28.5, which demonstrates that there were different drug release behavior between the double and single extrusion. Consequently, the double melt extrudated formulation was robust and gave the desired drug release pattern.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.189-196
• /
• 1992

To know the extension effect of storage temperature on the pre-rigor period of plaice, Paratichthys olivaceus muscle, the relationship between early changes after death and temperature dependency was studied. Killed plaices instantly with spiking at the brain were stored at $-3^{\circ}C,\;0^{\circ}C,\;5^{\circ}C\;and\;10^{\circ}$ used in studying the changes in rigor Index, ATP and its related compounds, lactate contents and K-value. The most shortest onset time of rigor-mortis and full rigor was revealed in the sample stored at $-3^{\circ}C$ among the all samples, where rigor-mortis began at 4hrs after spiking and maximum tension was attained after 28hrs. However, in case of fresh plaice muscle stored at $10^{\circ}C$, the onset of rigor-mortis and full rigor were retarded to 14hrs and 52hrs after spiking. ATP in sample stored at $5^{\circ}C\;and\;10^{\circ}C$ were decomposed slowly than sample at $0^{\circ}C\;-3^{\circ}C $ and within 35hrs storage. The fastest rate and the maximum content of lactate accumulation were showed in sample stored at $-3^{\circ}$ among the all samples. The correlation coefficient(r) between the rate of rigor mortis and ATP breakdown, rigor mortis and lactate accumulation, and ATP breakdown and lactate accumulation were -0.981946, 0.965044, and -0.964728, respectively. Freshness of $-3^{\circ}C$ stored samples was maintained for the longest time compared with other stored samples. The times reached around $20\%$ of K-value were 240hrs for samples stored at $-3^{\circ}C,\;96hrs\;for\;0^{\circ}C\;samples,\;71hrs\;for\;5^{\circ}C\;samples,\;and\;22hrs\;for\;10^{\circ}C$ samples. Samples stored at $-3^{\circ}C,\;and\;0^{\circ}C$ were showed higher temperature dependency on rate of rigor-mortis, ATP breakdown, and lactate accumulation than $5^{\circ}C\;and\;10^{\circ}C$ stored samples, but those samples have a lower temperature dependency on K-value.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.214-220
• /
• 1993

Browning of ascidian, Halocynthia roretzi, meat occurres very rapidly when skinned off or cut during processing and it resulted the quality loss of fresh frozen, dehydrated or fermented products. In this study, the causes of color development and prevention of browning were experimented. The browning of ascidian meat may be occurred enzymatically by a tyrosinase contained in meat and viscera which acted specifically on L-tyrosine as a substrate rather than on catechol. Activity of the enzyme in viscera was three times higher than in meat. The optimum pH and temperature on the tyrosinase activity of crude enzyme obtained from ascidian was 6.0 and $30{\sim}35^{\circ}C$, respectively. The enzyme was inactivated heating at $80^{\circ}C$ for 3 minutes or $90{\sim}100^{\circ}C$ for 1 minute and it was inhibited by $0.1{\sim}0.5mM$ solutions at ascorbic acid, sodium hydrogen sulfite, cystein, citric acid, cyanide but only sodium hydrogen sulfite treatment was effective to retard such a high content of enzyme as in case of viscera. In practical use for processing of ascidian meat browning was retarded by dipping the viscera removed ascidian meat in 0.2M citric acid for 5 minutes or $0.2\%$ sodium hydrogen sulfite solution for 1 minute resulting in sulfur dioxide residue less than 100 ppm.

• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.370-375
• /
• 1987

This study was conducted to examine the position effect of axillary buds on shoot multiplication and rooting with 1-year-old seedlings of Quercus acutissima. Shoot multiplication was greatly affected by axillary bud position: Productivity of multiple shoots were decreased in the order of top, mid and basal explants respectively. The best shoot multiplication (mean 6.1 shoots per explant) was obtained on WPM medium containing $1.0mg/{\ell}$ BAP and $0.1mg/{\ell}$ NAA using basal explant after 4-week-culture. Rooting was also greatly influenced by position. Its percentage was increased in the order of top, mid and basal explant respectively. Root initiation was better and more rapid on 1/2MS medium than GD medium. High rooting percentage (100%) was obtained on 1/2MS medium containing $0.2mg/{\ell}$ IBA after 15 days culture. Sucrose concentrations did not effect on rooting. However root development and shoot growth were greatly affected by them. Root was developed shortly on 1-2% levels and shoot growth was getting retarded, whereas both of them did not show significant difference at 3-6% levels. Rotting was decreased on 7-8% levels gradually, but shoot and leaf condition was better than any other concentrations. Survival rate of rooted explants in pot was varied according to the position of explants. Seedlings of top part were survived up to about 50% but most of mid and basal part seedlings did not survive over 4 weeks even in high humidity condition. Seedlings in pots showed normal growth over 10 months but most of them showed the condition of premature leaf shedding.

• Journal of the Geological Society of Korea
• /
• v.54 no.6
• /
• pp.587-603
• /
• 2018

3-D petroleum system modeling was performed on the Jeju Basin, offshore southern Korea to analyze the hydrocarbon migration and accumulation as well as the generation and expulsion of the hydrocarbon, based on subsurface structure maps of respective sedimentary formations. The lowermost formation deposited in Eocene time was assigned as a source rock, for which a mixed kerogen of type II and III was input in the modeling of oil and gas generation in consideration of the sedimentary environment of fluvio-lacustrine condition. Initial TOC was 4% as an input, based on the analysis of the well data and sedimentary environment. The modeling results show that a considerable amount of hydrocarbons was generated and expelled from the source rocks at the western Joint Development Zone (JDZ) sub-block 4, where the hydrocarbons was migrated to the above reservoir rocks at 20 Ma. The oil and gas in the reservoir rocks of the JDZ sub-block 4 are accumulated into the prospects with closure structures that has already been formed at the nearby areas. Another generation of hydrocarbon occurs from the source rock at the eastern border area of JDZ sub-block 1 and 2, where the expulsion of the hydrocarbons occurs at 10 Ma from the source rock into the above reservoir rocks, in which the accumulation also is expected. The generation, migration and accumulation were retarded at the eastern area of the JDZ sub-block 1 and 2, compared with the area of the western JDZ sub-block 4. Based on the modeling results, it is estimated that gases migrated laterally and vertically in long distance whereas oil migrated laterally in shorter distance than gases. A substantial amount of hydrocarbon could have seeped out of the reservoir formations to the surface since the migration of oil and gas actively occurred in Miocene time before the formation of seals. However, the modeling shows that the hydrocarbon could be accumulated smoothly into the closed structures that can be formed locally by alternation of sand and shale beds.

• Journal of Radiation Protection and Research
• /
• v.32 no.4
• /
• pp.140-156
• /
• 2007

This research was performed to investigate the morphological changes of folliculus ovary according to the radiation dose. The whole body radiation of 200 cGy, 400 cGy, and 600 cGy was given to the each groups of 5 months-aged female mouse. Various staining methods used in this research are: Hematosylin-Eosin method, and immunohistochemistrical methods using BrdU, TUNEL, p53, p21, PCNA and inhibin. The minute structural changes of folliculus ovary were observed through an electron microscope with high magnification. The morphological changes of growing folliculus ovary became distinct as the dose of X-rays increased. Especially, the nuclei of granular cells showed manifest condensation and the changes of the transparent zone were distinct. As a result of histochemical reaction according to Masson's trichrome method and reticular fiber method, the changed granular cells, the deformed basilar membrane of folliculus ovary and the abnormal arrangement of the reticular fiber were observed. In the reaction of BrdU, the granular cells of normal folliculus ovary with positive reaction rapidly decreased according to the increase of the dose of X-rays. In TUNEL study, granular cells showing positive reaction in retarded folliculus ovary were expanded to growing folliculus ovary and primordial folliculus ovary according to the increase of the dose of X-rays. In case of 600 cGy of X-rays, oocyte underwent apoptosis. In p53 immunohistochemistry, p53 manifested to be stronger as the dose of X-rays increased. p53 reactivity was manifested distinctively in all cells comprising folliculus ovary following irradiation of 600 cGy. p21 was manifested in granular cells of folliculus ovary and showed very positive reaction around follicular antrum according to the increase of the dose of X-rays. In PCNA, positive reaction was manifested in growing folliculus ovary, mature folliculus ovary and primordial folliculus ovary, but the extent of the reaction decreased as the dose of the X-rays decreased. The finding that the reaction of granular cells around folliculus ovary was stronger than that near follicular membrane indicates that what was damaged first by X-ray was the cells near folliculus ovary and follicular antrum. The reactivity of $inhibin-{\alpha}$ showed difference according to the growing stage of folliculus ovary: $inhibin-{\alpha}$ showed the most strong reaction in mature folliculus ovary with follicular antrum. There was strong reaction in granular cells around follicular membrane but $inhibin-{\alpha}$ did not occur at all in theca cells comprising follicular membrane. $Inhibin-{\alpha}$ in ovary tissue exposed to 400 cGy of X-rays was manifested more strongly than in ovary tissue exposed to 600 cGy of X-rays, which was related to the phenomenon that granular cells of mature folliculus ovary underwent necrosis or apoptosis increasingly due to X-rays. In an electron microscope with high magnification, nuclei and protoplasm of granular cells in growing folliculus ovary abruptly underwent minute structural changes according to the increase of dose of X-rays. Cell residue, by-product of cell decease, neutrophil and macrophage around follicular antrum were observed. The minute structural changes in granular cells showed typical characteristics of apoptosis: the increase of electronic density due to nuclear condensation, fragmentation of nuclei and atrophy of protoplasm. Necrosis of cells was identified but it was not so remarkable. Macrophage with apoptotic bodies was scattered. Proportional to the radiation dose, we found that the generation of heterogeneous substance of normal ovary texture's follicular fluid, the emergence of dyeing characteristic in the basilar membrane of folicle, the generation of apoptosis, and the transformation of macrophages, etc. From this results, we can infer the possible radiation hazard on the ovary of cervix cancer patient with radiation therapy.

• Parasites, Hosts and Diseases
• /
• v.27 no.4
• /
• pp.231-248
• /
• 1989

The growth and development of the metacercariae of F. seoulensis cultivated in vitro or on the chick chorioallantois were assessed by comparison with the optimum process of maturation in albino rats and new born chickens. The process of maturation was divided for convenience into six stages: Stage 1 ; cell multiplication, Stage 2; body shaping, Stage 3; separation of genital anlagen, Stage :1 organogeny, Stage 5; gametogony, and Stage 6: oviposition. In Hank's and Tyrode's .solutions, the metacercariae were alive up to 200 days or more at $4^{\circ}C$ without any development. The in vivo maturation process in rats or chicks was as follows: stage 1 from 6 hours; stage 2 from 24 hours; stage 3 from 48 to 72 hours; stage 4 from 3 to 4 days; stage 5 from 4 to 5 days; and stage 6 from 5 to 8 days. Despite unsuccessful infection of the metacercariae to 12 day old chicks, fully mature worms of stage 5 or 6 were recovered from new born chicks (1 to 2 days old), The metacercariae of F. seoulensis grown in vitro were up to stage 3 and no further maturation was observed. Of various media employed, the medium NCTC 109 (Gibco) or NCTC 135(Gibco) supplemented with 20% egg yolk or 20% whole egg macerate or 0.5% yeast was basically required for the earlier development of the fluke. It took 16.1 days(in average) to reach the stage 3 after cultivation. The metacercariae cultivated on the chorioallantoic membranes of 6∼13 day old chick embryo at 37∼38℃ showed their full development up to stage 5 or 6. However, the worms were in general remarkably retarded, compared with those grown in rats or chickens. In the experiments of worm transplant, although the transfer was failed from in vitro culture to in vivo of rats(Per os), the transplants from in vitro culture to the chorioallantois and from the choriollantois to in vivo of rat host were successful with or without development of the transferred worms. In the present study, it was observed that the metacercariae of F, seoulensis can be maintained in vitro media with poor development as well as fully matured in 1 to 2 day-old chicks or on the chorioallantois at a very low rate.

• Korean Journal of Weed Science
• /
• v.4 no.1
• /
• pp.79-87
• /
• 1984

Herbicidal effects of alachlor to peanuts were observed under different formulations (granule containing 5.0% a.i. and emulsifiable concentrate containing 43.7% a.i.) and levels (granule with 3 and 6kg/l0a and emulsion with 300㏄/l0a) with the transparent polyethylene (P.E.) film mulching. Formulations and levels of alachlor did not affect emergence ratio, time of emergence and flowering, and early growth of peanuts such as the number of leaves and branches, length of branches; and shoot dry weight at 20 and 40 days after planting, but early growth was enhanced by P.E. film mulching. At harvest, weed dry weight was positively correlated with length of branches, but negatively correlated with the number of branches and shoot dry weight. Acalyphu australis and Chenopodium album were not effectively controlled by the application of alachlor and growth of C. album was retarded under P.E. film mulching. Portulaca oleracea and Digitaria sanguinalis were effectively controlled by alachlor, but they were not affected by P.E. film mulching. At harvest, D. sanguinalis, A. australis, and Echinochloa crus galli were predominant weeds in all treatments; persistence of alachlor may not be long enough to control even sensitive weeds to alachlor such as D, sanguinalis in the field of peanuts of which canopy development was relatively slow. Weed dry weight at harvest was negatively correlated with the number of pods and grain yield of peanuts. Among the yield components only the number of nods per plant was positively correlated with grain yield. Hana weeding after July 1 increased grain yield of Peanuts even in alchlor applied plots.