• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.724-728
• /
• 2005

Electro-optic characteristics of reflective hybrid aligned liquid crystal (LC) cell driven by fringe field using a nematic LC with positive dielectric anisotropy have been studied. Optimized optical configurations are achieved by using a single polarizer, half-wave film and a cell with quarter-wave retardation. The simulation results shows an optimum cell retardation of $0.30{\mu}m$. This value may allow a practical cell gap larger than $3{\mu}m$, which makes it easy to control in the manufacturing process. Furthermore, this LC cell with optimized cell parameters shows low wavelength dispersion and the contrast ratio greater than 5 over exists about $100{\circ}$ in vertical direction and $160{\circ}$ in horizontal direction. Also, when using the LC with positive dielectric anisotropy rather than negative dielectric anisotropy, the display shows low power consumption and fast response time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.597-599
• /
• 2009

We have developed new type of LCD Device which enables switching from reflective to tranmissive LCD mode and vice versa according to brightness of the surrounding. Alternation in these modes are possible by adding on circular polarized sheet and retardation film onto the bottom polarizer which allows the control of the back light and the LCD cell gamma voltage depending on the atmosphere. This method has been evaluated and confirmed by running on the LCD module device in which we have optimized retardation value by Poincare polarizer analysis.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.289-292
• /
• 2011

Reactive mesogen (RM) is an organic liquid crystal molecule that can be self-aligned to have an optic axis of birefringence when coated over a polyimide alignment film. A free-standing optical wave-plate film consisting of RM and low-loss optical polymers was fabricated in this work, and the film was inserted across the polymer waveguide to form an integrated optical polarization converter. For convenient evaluation of the polarization converters, a waveguide polarizer and analyzer were fabricated in series. The polarization conversion efficiency was measured to be 25 dB for the wavelength range from 1520 to 1580 nm. The wave plate exhibited a temperature-dependent retardation of $4.5^{\circ}$ for a temperature change from 25 to $100^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.501-509
• /
• 2003

We have designed transflective liquid crystal display(LCD) associated with in-plane switching of a LC director driven by fringe-field, unlike other LCD mode. Reflective area consists of a λ/2 compensation film and a LC cell with retardation value(dΔn) of λ/4 with their optic axes making an angle of 15$^{\circ}$ and 75$^{\circ}$ against polarizer, respectively. In the transmissive area, top and bottom polarizers are parallel each other, an LC has a dΔn of λ/2, and another λ/2 compensation film is inserted between the LC cell and bottom polarizer. With the configuration, both devices show dark state initially. When an incident light is 550nm, the device shows wide-viewing-angle characteristics such that in the reflective area the contrast ratio target than 5 exists up to 55$^{\circ}$ of polar angle in all directions and in transmissive area it exists about 100$^{\circ}$ in vortical direction and 110$^{\circ}$ in horizontal direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.589-594
• /
• 2003

The pi-cell [1] is known as one of the candidates for a fast response time and a good viewing angle characteristics due to a self-compensated configuration and can be a replaceable mode instead of the current TN mode and the IPS mode for moving picture in future. This paper shows the optimized condition to maintain bend state instead of splay state, which is mortal demerit for good optical properties in a pi-cell, by using the polymer stabilized method [2]. The good electro-optical characteristics are also obtained by optimizing the various factors, which are monomer concentration in a LC, UV intensity, curing time, curing voltage, and curing temperature, and by using retardation film. We use a scanning electron microscope to study the structures of the polymer stabilized polymer network in a pi-cell as a key to figure out why bend state is occurred.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.453-456
• /
• 2005

Color characteristics of a dark state in the IPS-mode depending on viewing direction have been studied. IPS-mode is having a little variation of $d{\Delta}n$ with viewing angle since the LC rotates in plane. However, this mode shows asymmetric light leakage and color characteristics with viewing angle in a dark state. This drawback can be overcome by optimized retardation value of TAC film, pre-tilt angle & $d{\Delta}n$ of LC.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.97-100
• /
• 1998

We have investigated the effects of crystalline activation on solid phase crystallization (SPC) of amorphous silicon (a-Si) thin films. Wet blasting and self ion implantation were employed as the activation treatments to induce macro or micro crystalline damages on deposited a-Si films. Low temperature and larger grain crystallization were obtained by the applied two-step activation. High degree of crystallinity was also observed on both furnace and rapid SPC. crystalline activations showed the promotion of nucleation on the activated regions and the retardation of growth in an amorphous matrix in SPC. The observed behavior of two-step SPC was strongly dependent on the applied activation and annealing processes. It was also found that the diversified effects by macro and micro activations on the SPC were virtually diminished as the annealing temperature increased.

• 열처리공학회지
• /
• 제6권3호
• /
• pp.152-158
• /
• 1993

Effects of oxide film which is grown by heat treatment on the hydrogen embrittlement (HE) of 17-4 PH stainless steel were investigated. Specimems were tensile tested after cathodic hydrogen charging and the be haviors of HE were evaluated from the elongation change. It was found that specimems solution treated at $1040^{\circ}C$ for 1/2hour showed best retardation ability to HE for both aging conditions i.e. $480^{\circ}C{\times}1hr$ and $620^{\circ}C{\times}4hrs$. X-ray and Auger study revealed that the major composition of oxide films are $Cr_2O_3$ and $CuCr_2O_4$.

• 한국광학회지
• /
• 제30권4호
• /
• pp.159-166
• /
• 2019

PET와 같은 단축 이방성 기층의 유사 투과타원상수 ${\rho}=tan{\psi}_{\mu}e^{i{\Delta}_{\mu}}$는 광축의 방위각이 고정되어 있을 때 위상지연각이 변함에 따라 극좌표계에서 원을 그린다. 이 원의 반지름과 중심의 좌표는 광축의 방위각에 의해 결정되지만 항상 좌표점 (1,0)을 지나며 원의 중심은 실수축 상에 있다. 단축 이방성 기층의 유사 투과타원상수가 극좌표에서 그리는 자취의 이러한 특성들을 해석적으로 확인하고 이 특성들을 이용하여 측정된 투과타원상수로부터 단축 이방성 기층의 광축의 방위각과 위상지연각을 결정하는 간단한 표현들을 제시하고 실제 PET 시료의 이방성 분석에 잘 적용됨을 보였다.

• 한국식품저장유통학회지
• /
• 제12권1호
• /
• pp.17-22
• /
• 2005

본 연구는 홍화씨 가공제품의 산패방지 및 품질 향상을 위하여 가식성 필름을 코팅하여 저장 중의 물리화학적 변화를 조사하였다. 가식성 필름 용제로 코팅한 홍화정의 색도 변화는 저장기간이 길어질수록 명도 L 값과 적색도 a 값은 조금씩 증가하였으며 황색도 b 값은 감소하였다. 코팅한 홍화정의 수분함량의 변화는 저장기간이 길어질수록 약간의 증가보였으나 큰 변화는 없었다. 산가는 저장온도에 관계없이 저장기간이 길어질수록 가식성 필름 용제로 코팅한 홍화정의 산가가 대조구에 비해 낮게 나타났다. 과산화물가는 저장기간이 길어질수록 점점 증가를 보였으나 저장 30일째에 $25^{\circ}C$나 $50^{\circ}C$의 sodium caseinate와 k-carraggenan으로 코팅한 것이 대조구에 비해 $ 50\%$낮았다. 저장기간에 따른 냄새에 대한 관능검사는 두가지의 가식성 필름 용제로 코팅한 홍화정이 대조구에 비해 모두 좋은 결과를 나타내었으며, 그 중에서도 k-carrageenan으로 코팅한 홍화정이 sodium caseinate로 코팅한 것 보다 좋은 결과를 보였다. 관능검사와 유지 산패 측정의 주요 인자인 산가와 과산화물가를 측정한 결과를 종합하여 볼 때, 홍화정의 산패취를 방지하고 품질의 보존을 위한 방법으로 가식성 코팅제인 caseinate와 k-carrageenan 용제로 코팅하는 것이 매우 효과적이었다.