• 한국CDE학회논문집
• /
• 제13권3호
• /
• pp.235-242
• /
• 2008

This paper proposes a method for improving the process plan quality by use of dimensional tolerances. Dimensioning and tolerancing plays a key role in manufacturing process plan because the final part must ensure conformance with the dimensions and tolerances in its drawing. As a first step for the improvement of process plan quality, two resultant tolerances in design and process plan should be compared each other, and so a tolerance chart is used for acquisition and comparison of the two tolerances. In addition to two kinds of design and manufacturing tolerances, operational sequences or paths for the resultant dimension and tolerance are additionally recognized for measuring the quality of process plan quantitatively. Rooted tree is applied to find the related paths for the manufacturing resultant tolerances. A quality coefficient is defined by the components of two tolerances and their relations, the paths related to manufacturing resultant tolerances and the difficulty of an operation. In order to improve the quality of manufacturing process plan, the paths that two kinds of tolerances are the same or different in the rooted tree are recognized respectively and a method for tolerance rearrangement is developed. A procedure for improving the quality is suggested by combining the coefficient and the tolerance rearrangement method. A case study is applied to illustrate the efficiency of improvement method.

• 한국수학사학회지
• /
• 제26권2_3호
• /
• pp.149-161
• /
• 2013

본 논문에서 연립일차방정식의 풀이법 연구로부터 시작하여 연립고차방정식의 해법 연구로 발전되어가는 과정을 역사발생적 관점에서 고찰한다. 연립일차방정식을 푸는데 중요한 역할을 하는 가우스 소거법과 비교하여 상대적으로 덜 알려져 있지만, 연립고차방정식에는 오일러의 소거이론과 베조의 종결식이 있다. 이러한 발전의 역사적 과정을 알아보고 특별히 종결식을 처음으로 정의한 베조의 연구방법을 조명해 본다.

• 대한인간공학회지
• /
• 제33권6호
• /
• pp.553-563
• /
• 2014

Objective: The purpose of this study was to evaluate the effect of gender (male, female) and grip spans (45, 50, 60, 70, 80mm) on total grip strength, resultant force, finger force and subjective discomfort rating. Background: In order to prevent musculoskeletal disorders, studies of hand tools need to be preceded based on grip strength, finger force, and subjective discomfort rating. However, experimental apparatus using tools such as pliers that reflect the actual work place was almost non-existent. Method: Fifty-Two (26 males and 26 females) participants were recruited from the student population. In this study, a pair of revised pliers, which can change grip span from 45 to 80mm was applied to estimate total grip strength, resultant force and individual finger forces. All participants were asked to exert a maximum grip force with three repetitions, and to report the subjective discomfort rating for five grip spans of pliers (45, 50, 60, 70, 80mm). Results: There were significant differences of total grip strength, resultant force, individual finger forces and subjective discomfort rating according to grip span. The lowest total grip strength was obtained from the grip span of 80mm for both genders. For resultant force, the highest resultant force was exerted at grip spans of 50, 60 and 70mm for females and 50 and 60mm for males. The lowest subjective discomfort rating was observed in the 50mm for both genders. Conclusion: Based on the result, 50mm and 60mm grip spans which provide the highest force and lowest discomfort rating might be recommendable for the male and female pliers users. Application: The findings of this study can provide guidelines on designing a hand tool to help to reduce hand-related musculoskeletal disorders and obtain better performance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.236-240
• /
• 2007

In order to control the microstructure of amorphous/crystalline composites, gas atomized $Cu_{54}Ni_{6}Zr_{22}Ti_{18}$ metallic glass powders wrapped in a crystalline brass were extruded repeatedly. The size of microstructure in the resultant composites was varied depending on the pass of extrusion as well as on the area reduction ratio. The microstructure could be estimated using an equation of $r_n=r_{n-1}/R^{1/2}$, where R is reduction ratio and $r_n$ is the resultant radius of the extruded bar after n pass. Theory of microstructural refinement as well as the relationship between the resultant microstructures and mechanical properties was discussed.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.36-43
• /
• 2005

It is the basic requirement of design process of parts assembly to specify geometric dimensions and tolerances of product characteristics. Among them, tolerance stack analysis is one of the important methods to specify tolerance zone. Tolerance stack analysis is to calculate gap using tolerances which includes geometric and coordinate dimensions. In this study, we suggested more general method called the virtual method to analyze tolerance stack. In virtual method, tolerance zone is formed by combination of dimensional tolerance, geometric tolerance and bonus tolerance. Also tolerance zone is classified by virtual boundary condition and resultant boundary condition. So gap can be defined by combination of virtual boundary and/or resultant boundary. Several examples are used to show the effectiveness of new method comparing to other methods.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.386-390
• /
• 2007

In order to, simultaneously, synthesize and control the size of microstructure of amorphous/crystalline composites, a repeated extrusion process was performed using the gas atomized $Cu_{54}Ni_6Zr_{22}Ti_{18}$ metallic glass powders and the crystalline brasses. The size of microstructure in the resultant composites was varied depending on the pass of extrusion as well as on the area reduction ratio. The microstructure could be estimated using an equation of $r_n=r_{n-1}/R^{1/2}$, where R is reduction ratio and $r_n$ is the resultant radius of the extruded bar after n pass. Theory of microstructural refinement as well as the relationship between the resultant microstructures and mechanical properties was discussed.

• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.395-409
• /
• 1998

This paper concerns the development and implementation of an orthotropic, stress resultant elasto-plastic finite element model for the collapse load analysis of reinforced concrete plates. The model implements yield line plasticity theory for reinforced concrete. The behaviour of the yield functions are studied, and modifications introduced to ensure a robust finite element model of cases involving bending and twisting stress resultants ($M_x$, $M_y$, $M_{xy}$). Onset of plasticity is always governed by the general yield-line-model (YLM), but in some cases a switch to the stress resultant form of the von Mises function is used to ensure the proper evolution of plastic strains. Case studies are presented, involving isotropic and orthotropic plates, to assess the behaviour of the yield line approach. The YLM function is shown to perform extremely well, in predicting both the collapse loads and failure mechanisms.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.40-47
• /
• 2000

This paper presents a circuit of resonant voltage resultant type DC/DC converter consists of two unit half-bridge high frequency resonant inverters, and describes operating modes, principle and analysis of the proposed circuit. Also, the analysis of the proposed circuit has generally described by using normalized parameters. Based on the characteristic values, a method of the circuit design is proposed. According to phase shift, the output voltage of the proposed circuit can be controlled. In addition, the justification of theoretical analysis was certified by comparing to the experimental waveforms. In the future, this proposed converter show that it can be practically used as the system of fixed DC voltage source etc.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.79-87
• /
• 1999

As it is well appreciated plate forming by line heating takes an important role in ship production process. The paper deals with the development of line heating simulator which can produce the resultant deformation due to line heating in a few minute adn with which user can see the result graphically. For the present purpose mechanical modelling is adopted which can explicitly represent the physical resultant of line heating. In developing the present line heating simulator several program modules are integrated by adopting GUI concept such that the simulator can produce resultant deformation with keeping high accuracy. Application example is illustrated for the twisted shape surface which can be frequently seen in ship and offshore structures.

• 한국운동역학회지
• /
• 제18권4호
• /
• pp.179-189
• /
• 2008

본 연구는 9명의 남자 중학교 초보피험자들을 대상으로 태권도 옆차기 동작의 숙련정도에 따른 운동학적 협응과정을 살펴보는 데 목적을 두었다. 이용된 변인은 최대합성직선속도, 분절간 각속도, 각도 대 각도 도면이었다. 분석결과, 연습후기로 갈수록 인접한 분절간의 운동량 전이가 잘 이루어져 각 분절의 최대합성직선속도가 유의하게 증가하였으며 분절간 각속도에서 학습후기로 갈수록 몸통에서 대퇴, 하퇴분절로의 순차적인 전이를 보였으며 던지는 듯하면서 미는 듯한 동작형태를 보였다. 엉덩관절과 무릎관절의 각도-각도 도면에서는 학습초기에는 다이나믹스한 변화를 보였으나 학습이 됨에 따라 숙련된 피험자처럼 안정적인 협응 패턴을 보여주었다.