• Journal of Information Display
• /
• v.3 no.3
• /
• pp.17-23
• /
• 2002

In this work we report methods of formation of three-dimensional structures of particles in a liquid crystal host. We found that, under the appropriate conditions, the particles are captured and dragged by the moving isotropic/nematic front during the phase transition process. This movement of the particles can be enhanced significantly or suppressed drastically with the influence of an electric field and/or with changing the conditions of the phase transition, such as the rate of cooling. As a result, a wide variety of particle structures can be obtained ranging from a fine-grained cellular structure to stripes of varying periods to a course-grained "root" structures. Changing the properties of the materials, such as the size and density of the particles and the surface anchoring of the liquid crystal at the particle surface, can also be used to control the morphology of the three-dimensional particle network and adjust the physical properties of the resulting dispersions. These particle structures may be used to affect the performance of LCD's much as polymers have been used in the past.

• Phonetics and Speech Sciences
• /
• v.7 no.3
• /
• pp.131-138
• /
• 2015

In this paper, we propose L1-norm regularization for state vector adaptation of subspace Gaussian mixture model (SGMM). When you design a speaker adaptation system with GMM-HMM acoustic model, MAP is the most typical technique to be considered. However, in MAP adaptation procedure, large number of parameters should be updated simultaneously. We can adopt sparse adaptation such as L1-norm regularization or sparse MAP to cope with that, but the performance of sparse adaptation is not good as MAP adaptation. However, SGMM does not suffer a lot from sparse adaptation as GMM-HMM because each Gaussian mean vector in SGMM is defined as a weighted sum of basis vectors, which is much robust to the fluctuation of parameters. Since there are only a few adaptation techniques appropriate for SGMM, our proposed method could be powerful especially when the number of adaptation data is limited. Experimental results show that error reduction rate of the proposed method is better than the result of MAP adaptation of SGMM, even with small adaptation data.

• Journal of muscle and joint health
• /
• v.18 no.1
• /
• pp.39-49
• /
• 2011

Purpose: The purpose of this study was to identify the effects of CD-ROM education on anxiety and self-care compliance in patients undergoing spinal surgery. Method: This study used a nonequivalent control time difference design. A sample of 51 participants received both CD-ROM education (n=25) or booklet education (n=26) regarding spinal surgery procedure and postoperative self-care. The data were collected using a self-administered questionnaire containing State-Trait Anxiety Inventory (STAI Form Y-2), Visual analog scale, and self-care compliance. Result: The level of trait anxiety in the experimental group was not significantly different from that in the control group (t=-6.44, p=.523). The level of state anxiety in the experimental group was significantly lower than in that the control group according to time changes (F=4.17, p=.018). State anxiety showed significantly negative correlation to self-care compliance (r=-.30, p=.034). Conclusion: The education program using CD-ROM for spinal surgery patients can be applied to nursing practice for relieving state anxiety and promoting self-care compliance.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1807-1813
• /
• 2018

In this paper, the fault line selection and location problems of single line-to-ground (SLG) fault in distribution network are addressed. Firstly, the adaptive filtering property for empirical mode decomposition is formulated. Then in view of the different characteristics showed by the intrinsic mode functions(IMF) under different fault inception angles obtained by empirical mode decomposition, the sign of peak value about the low-frequency IMF and the capacitance transient energy is chosen as the fault line selection criteria according to the different proportion occupied by the low-frequency components. Finally, the fault location is determined based upon the comparison result with adjacent fault passage indicators' (FPI) waveform on the strength of the interaction between the distribution terminal unit(DTU) and the FPI. Moreover, the logic nodes regarding to fault line selection and location are newly expanded according to IEC61850, which also provides reference to acquaint the DTU or FPI's function and monitoring. The simulation results validate the effectiveness of the proposed fault line selection and location methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.738-742
• /
• 2007

The variations in the device characteristics of hydrogenated amorphous thin-film transistors (a-Si:H TFTs) were studied according to the processes of pixel electrode fabrication to make active-matrix flat-panel displays. The off-state current was about 1 pA and the switching ratio was over $10^6$ before fabrication of pixel electrodes; however, the off-state current increased over 10 pA after fabrication of pixel electrodes. Surface treatment on SiNx passivation layers using plasma could improve the off-state characteristics after pixel electrode process. $N_2$ plasma treatment gave the best result. Charge accumulation on the SiNx passivation layer during the deposition of transparent conducting layer might cause the increase of off-state current after the fabrication of pixel electrodes.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.1058-1069
• /
• 2013

This paper proposes and designs a new output filter called an LCFL filter for application to three phase three wire shunt active power filters (SAPF). This LCFL filter is derived from a traditional LCL filter by replacing its capacitor with a C-type filter, and then constructing an L-C-type Filter-L (LCFL) topology. The LCFL filter can provide better switching ripple attenuation capability than traditional passive damped LCL filters. The LC branch series resonant frequency of the LCFL filter is set at the switching frequency, which can bypass most of the switching harmonic current generated by a SAPF converter. As a result, the power losses in the damping resistor of the LCFL filter can be reduced when compared to traditional passive damped LCL filters. The principle and parameter design of the LCFL filter are presented in this paper, as well as a comparison to traditional passive damped LCL filters. Simulation and experimental results are presented to validate the theoretical analyses and effectiveness of the LCFL filter.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.842-848
• /
• 2018

Motivated by reducing the uncertainties in quantification of debris bed coolability, this paper reports an experimental study on two-phase flow resistances and interfacial drag in packed porous beds. The experiments are performed on the DEBECO-LT (DEbris BEd COolability-Low Temperature) test facility which is constructed to investigate the adiabatic single and two phase flow in porous beds. The pressure drops are measured when air-water two phase flow passes through the porous beds packed with different size particles, and the effects of interfacial drag are studied especially. The results show that, for two phase flow through the beds packed with small size particles such as 1.5 mm and 2 mm spheres, the contribution of interfacial drag to the pressure drops is weak and ignorable, while the significant effects are conducted on the pressure drops of the beds with bigger size particles like 3 mm and 6 mm spheres, where the interfacial drag in beds with larger particles will result in a descent-ascent tendency in the pressure drop curves along with the fluid velocity, and the effect of interfacial drag should be considered in the debris coolability analysis models for beds with bigger size particles.

• Journal of Korea Multimedia Society
• /
• v.12 no.12
• /
• pp.1819-1826
• /
• 2009

To enhance the automatic performance of existing predicting and planning algorithms that require a predefined probability of the states' transition, this paper proposes a multiple sequence generation system. When interacting with unknown environments, a virtual agent needs to decide which action or action order can result in a good state and determine the transition probability based on the current state and the action taken. We describe a sequential behavior generation method motivated from the change in the agent's state in order to help the virtual agent learn how to adapt to unknown environments. In a sequence learning process, the sensed states are grouped by a set of proposed motivation filters in order to reduce the learning computation of the large state space. In order to accomplish a goal with a high payoff, the learning agent makes a decision based on the observation of states' transitions. The proposed multiple sequence behaviors generation system increases the complexity and heightens the automatic planning of the virtual agent for interacting with the dynamic unknown environment. This model was tested in a virtual library to elucidate the process of the system.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1907-1915
• /
• 2008

Recently the assurance of railroad safety is very important issue in KOREA because there are lots of changes in the railroad industries. The Railway Safety Act was established in order to cope with these changes effectively and prevent the railroad transportation accidents. According to this law, Korea Transportation Safety Authority (KOTSA) has been entrusted with 'Integrated Railroad Safety Audit (IRSA)'. Even though newly introduced IRSA is conducted smoothly, it is necessary to study the methodology and criteria of the state's safety audit system in other fields to improve the efficiency. In ICAO (International Civil Aviation Organization) Safety Management Manual, a state's safety programme embraces those regulations and directives for the conduct of safe operations from the perspective of aircraft operators and those providing air traffic services(ATS), aerodromes and aircraft maintenance. The safety programme may include provisions for such diverse activities as incident reporting, safety investigations, safety audits and safety promotion. To implement such safety activities in an integrated manner requires a coherent SMS(Safety Management System). In this paper, to improve the efficiency of IRSA, we investigated the ICAO's the State's Aviation Safety Audit Systems and ICAO Safety Management Manual. And through the result of investigation, we proposed the improvement concept of IRSA.

• Journal of Korean Society of Archives and Records Management
• /
• v.19 no.2
• /
• pp.213-241
• /
• 2019

This study looked at the US records management system through the US Records Management Act and derived the characteristics of US records management. The federal and state of the United States were compared to identify the characteristics within the US administrative system. Also, the composition and content of the US Records Management Act were analyzed according to the records management process. As a result, US records management has characteristics of recognizing federal and state independence, yet maintaining cooperative relations between agencies for the protection of permanent values.