• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.15-18
• /
• 2008

WDM is an incredibly promising technique in which multiple channels are operated along a single fiber, providing the facilities of terabit per second bandwidth. Thus, the survivability of WDM networks becomes critical for the success of the next generation internet architecture. Despite the fact that the path-based proactive restoration scheme guarantees 100% restoration as it computes a backup light path while the primary light path is being set up, this method results in additional capacity consumption. In this paper, an ideal technique is proposed that modifies the active multi-backup paths method and results in a better restoration scheme. Based on a theoretical analysis, a new method is shown to reduce the number of hopes as well as the restoration time.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.117-130
• /
• 2002

Due to its salient features, the optical burst switch is becoming a key technology for the optical Internet. Within this technology, the survivability issue in the optical Internet has to be addressed because a simple failure causes severe damage to the huge amount of data carried in optical fiber. In this paper, we introduce a restoration procedure that can provide good survivability in the optical burst switch (OBS)-based optical Internet. OBS restoration can survive various types of network failure while maintaining good network performance. We propose novel restoration mechanisms, namely, "temporary Label Switched Path (LSP)" and "bossy LSP," to enhance restoration time and network utilization. The simulation results verify that the proposed OBS restoration achieves good network performance and provides good network connectivity as well.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.439-445
• /
• 2007

Stereoscopic viewing is an efficient technique for not only computer vision but also remote sensing applications. Generally, stereo pair obtained at the same time is necessary for 3D viewing, but it is possible to synthesize a stereomate suitable for stereo view with a single image and disparity-map. There have been researches concerning the generation of the synthetic stereomate from remote sensing imagery. However it is hard to find researches concerning the restoration of occlusion in stereomate. In this paper, we generated synthetic stereomates from remote sensing images, focused on the occlusion restoration. In order to figure out proper restoration methods depending on the spatial resolution of remote sensing imagery, we tested several methods including general interpolation and inpainting technique, then evaluated the results.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.241-247
• /
• 2010

We propose and experimentally demonstrate a service-aware optical transport system. The proposed service-aware optical transport system makes a flow based on service type and priority of traffic. The generated flow is mapped to a corresponding sub-${\lambda}$ for transport over an optical network. Using sub-${\lambda}$ provided by the centralized control plane, we could effectively provide quality-of-service guaranteed Ethernet service and best-effort service simultaneously in a single link. The committed information rate (CIR) traffic and best-effort traffic are assigned to different sub-${\lambda}s$. The bandwidth of the CIR traffic is guaranteed without being affected by violation traffic because the bandwidth is managed per each sub-${\lambda}$. The failure detection time and restoration time from a link failure is measured to be about 60 ${\mu}s$ and 22 ms, respectively, in the ring network. The measured restoration time is much smaller than the 50 ms industry requirement for real-time services. The fast restoration time allows the proposed service-aware optical transport system to offer high availability and reliability which is a requirement for transport networks.

• Journal of Korea Multimedia Society
• /
• v.24 no.12
• /
• pp.1641-1652
• /
• 2021

To analyze the crime scene, the role of digital evidence such as CCTV and black box is very important. Such digital evidence is often damaged due to device defects or intentional deletion. In this case, the deleted video can be restored by well-known techniques like the frame-based recovery method. Especially, the data such as the video can be generally fragmented and saved in the case of the memory used almost fully. If the fragmented video were recovered in units of images, the sequence of the recovered images may not be continuous. In this paper, we proposed a new video restoration method to match the sequence of recovered images. First, the images are recovered through a frame-based recovery technique. Then, after analyzing the time information marked on the images, the time information was extracted and recognized via optical character recognition (OCR). Finally, the recovered images are rearranged based on the time information obtained by OCR. For performance evaluation, we evaluate the recovery rate of our proposed video restoration method. As a result, it was shown that the recovery rate for the fragmented video was recovered from a minimum of about 47% to a maximum of 98%.

• Journal of architectural history
• /
• v.32 no.2
• /
• pp.7-19
• /
• 2023

This article focuses on the Namdaemum repair and the Seokguram restoration, which had begun in 1961, as an important repair conducted during the time of seeking the conservation principle of architectural heritage after liberation in Korea. Through the analysis of the principles described in the repair report issued after the two repairs, meeting records, and related expert announcements, it is shown that the principle of 'preservation of the historic state' had been established at Namdaemun repair and later have changed to the principle of 'restoration of the historic form' which means reconstruction in Seokguram restoration. By analyzing the minutes of the Cultural Heritage Committee's meeting on the repair of other cultural properties during this period, it is revealed that the key terms related to the preservation principle, 'historic form' and 'restoration', were given meaning as 'object' and 'method' of preservation, and then 'restoration of the historic form' has been gradually used as a conservation principle.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.612-615
• /
• 2007

The environmental damage caused by river-improvement and slope of incision cliff can dest habitations of animate nature and it takes long time for restoration. River system constructed with stability of flood control, fine biotope, harmony with surroundings should be need to protect and restore nature. Therefore, in this study, conduct comparative experiment in various methods which are stable hydraulically and develop vegetation on revetment of bank, stream bed protection and disaster prevention aspect.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.131-145
• /
• 2015

Cultural assets restoration is being considered highly as a practical way to extend the lifespan of damaged cultural assets and re-highlight their value. However, restoration process has been mostly dependent on the manual work involving the experience and skill of a person performing restoration, thereby requiring much time and effort. In recent, it became possible to apply a method allowing restoration to be performed more accurately and easily according to the material characteristics and shape of cultural assets. Namely, it is to use a method of printing out the 3D shape data computed in computer as real object by using 3D printer for the restoration that has been performed manually. The missing part of a cultural asset is computed into computer data first and is printed out by using 3D printer to undergo a simple shaping process. The result of 3D printer application showed that repetitive output and shape and figure revision of digital data were possible, and it was possible to improve the degree of completedness of restoration through test output using various types of restoration materials using various materials. For the purpose of verifying the possibility of applying 3D printer to restore missing part of earthenware, two pieces of modern reproductions, namely, the Seven Treasure Incense Burner and Earthenware with Wagon Wheel Decoration, were artificially damaged. The restoration result showed that compared to manual work, it showed better effectiveness in curtailing work time and reproducing accurate shape. On the other hand, secondary manual work was slightly needed for detailed binding and to vividly express surface texture.

• Journal of Internet Computing and Services
• /
• v.4 no.2
• /
• pp.1-9
• /
• 2003

Path restoration, which is needed to increase network survivability in MPLS networks, is a technology of supplying reliable service by delivering the traffics through restoring the paths when links or nodes of a working path are failed. In this paper, we propose a path restoration method using duplication of working paths for link failure as a method of restoring paths for the high priority traffics. The existing path restoration method transmits the traffics to the path restoration uniformly in regardless of the priority while link obstacle. It has a problem to take a long time to restore the connection of the high priority traffics. On the other hand, the suggested restoration method establishes the duplication path for the working path, which transmits the high priority traffics and transmit the traffics through the duplication path. It has a strong point to restore the connection quickly. Also, through simulation we analyze the performance of the restoration system using the duplication path and prove that the proposed restoration method is superior in performance to the existing restoration methods regarding to the high priority traffics.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.5
• /
• pp.16-28
• /
• 2007

In this study, the implications for landscape architecture in the restoration Project of Cheonggyecheon will be shown through the analysis of factors for landscape architect scheme modification. The method of study consists of theoretical study, analysis of the plan and design of landscape architecture of the restoration project of Cheonggyecheon, and deduction of implications thereof. The controversial feints included the many difficulties in realizing the productive design of landscape architecture due to the selective collecting of public opinion and the problems of settling the complications, the design limit of the turnkey and MA systems, the lack of hydraulic knowledge and technology and the shortage of vegetation monitoring data and experimental materials. The alternative proposals are as follows: 1) there should be agreement between the government organization and the civil group, 2) in the turnkey bidding for the river restoration projects, the river restoration design based on the volume divided into some parts should be reconsidered in order to maintain consistency in the total design, 3) in order to maintain consistency in the planning policies, MA designs should also be introduced and applied from the first stage of the project through its completion, and 4) data such as the safe water level in case of flooding for the facilities and the vegetation and data in connection with the ecological restoration of river should be accumulated. If these controversies are not settled effectively, the river restoration project will be delayed due to complications with the citizens and wasted time and effort will result from the frequent design changes. In addition, landscape architecture in this kind of restoration project is bound to decrease in the future due to frequent changes in the hydraulic-centered design.